jtext.tcl

Introduction

The jtext.tcl library is distributed as part of the jstools package. It provides wrappers around the widget commands that manipulate the contents of a text widget, building additional functionality on top of them

This document describes jtext.tcl version 4.1/4.4.

Usage

Accessing the Library

In order to use the jtext.tcl library, it (and any other libraries it depends on) must be in your Tcl auto_path, described in tclvars(n). Information about how to arrange that, and other conventions common to the jstools libraries, is in the Usage section of The jstools Libraries.

Using jtext.tcl as an Interface to the Text Widget

The purpose of the jtext.tcl library is as an interface to the text widget allowing additional functionality to be built on top of its widget command. For instance, j:text:insert, along with the jtexttags.tcl library, can support the notion of a set of `current tags' automatically applied to newly­inserted text. My main goal with this library is to use it to build a general undo facility, allowing an arbitrary number of changes to a text widget to be undone and redone by journaling changes to the text widget. (This is not yet supported.) This means that it's very important that if an application uses the jtext.tcl procedures with a particular text widget, all changes to that widget must be made through the jtext.tcl procedures.

The jtext.tcl library also keeps track of the state of the text widget - whether it's `clean' or `dirty'. This will only be accurate if all your accesses to the widget are through the jtext.tcl library.

(Actions that don't affect the contents of the text widget in any way, or that you don't care about being able to undo, don't need to go through the library. For instance, there's no j:text:get procedure, because there's no need to journal pathname get commands.)

Credits and Copyright

Author

Jay Sekora
js@aq.org
http://www.aq.org/~js/

Copyright

The library is copyright © 1992-1995 by Jay Sekora, but may be freely redistributed under the conditions at the top of the file.

Overview

Procedures

j:text:insert - insert text into text widget at insert point
j:text:insert_string - deprecated alias for j:text:insert
j:text:move - move insert mark in text widget to a particular position
j:text:delete - delete a range of characters in a text widget
j:text:replace - replace a range of characters in a text widget with a string
j:text:mark_dirty - specify that a text widget has been modified
j:text:mark_clean - specify that a text widget has been saved
j:text:is_dirty - true if a text widget has been modified since it was saved
j:text:has_selection - true if there is a selection in a text widget
j:text:insert_touches_selection - true if insert point touches or is in selection
j:text:tagged_insert - insert tagged sequences of text

See Also

jtexttags.tcl

j:text:insert

Usage

j:text:insert w text

Arguments

w is the text widget to insert into
text is the text to insert

Description

This procedure inserts text into w at w's insert point.

If w has been configured for use with the jtexttags.tcl library (specifically, if a tag­list has been set for it with j:tag:set_tags, or j:tag:set_tag), then the text will be inserted with w's current tag list (and no other tags); see the jtexttags.tcl documentation for more about this.

If J_PREFS(typeover)is true - if the user has selected `Typing replaces selection' on the Global Preferences panel - then if (1) there is a selection in w and (2) the insert point is within or adjacent to the selection, the selection will be deleted and replaced by text. (The requirement that the insert point be in or next to the selection is so that the user can't inadvertently delete text distant from the place in the document where sie's working, possibly without realising it.)

j:text:move

Usage

j:text:move t index

Arguments

t is the text widget whose insert point is being changed
index is the new position of the insert point

Description

This procedure moved text widget t's insert point to index. index can be in any of the legal forms for a text widget index; see text(n) for details.

If w has been configured for use with the jtexttags.tcl library (specifically, if a tag­list has been set for it with j:tag:set_tags, or j:tag:set_tag), then w's current tag list will be set based on the tags of the (new) neighbouring characters; see the jtexttags.tcl documentation for more about this.

j:text:delete

Usage

j:text:delete t from to

Arguments

t is the text widget whose insert point is being changed
from is the index of the first character in t to delete
to is the index of the character after the last character in t to delete

Description

This procedure deletes all characters in t from from, inclusive, to to, exclusive. (I.e., the character at from and any characters between from and to will be deleted, but the char at to itself won't be.) from and to can be in any of the legal forms for a text widget index; see text(n) for details.

j:text:replace

Usage

j:text:replace t from to string

Arguments

t is the text widget you want to replace text in
from is the index of the first character to replace
to is the index of the character after the last character to replace
string is the string to insert in t in place of the range from from to to

Description

This procedure replaces a sequence of character in text widget t with string. After being inserted, string will have all (and only) the tags that the character at from had before the replacement. The insertion point is left after string.

j:text:mark_dirty

Usage

j:text:mark_dirty t

Argument

t is the text widget which has been changed

Description

This procedure marks the text widget t as having been changed. It should be used after all actions that modify the contents of the widget. It's intended for applications such as editors, which need to know whether a document has been modified since it was last saved.

All the jtext.tcl procedures that modify text call this properly, so you should never need to set it yourself.

j:text:mark_clean

Usage

j:text:mark_clean t

Argument

t is the text widget which no longer has pending changes

Description

This procedure marks the text widget t as not having pending changes. Typically, this is used after an application has saved the widget's contents into a file, or is done with the widget. It's intended for applications such as editors, which need to know whether a document has been modified since it was last saved.

j:text:is_dirty

Usage

j:text:is_dirty t

Argument

t is the text widget whose state you want to query

Description

This procedure returns true (1) if the text widget t has pending changes (i.e., if its contents have been changed since it was created or since it was last marked clean with j:text:mark_clean). Otherwise it returns false (0).

j:text:has_selection

Usage

j:text:has_selection t

Argument

t is the text widget whose situation you want to query

Description

This procedure returns true (1) if there is currently a selection in text widget t. Otherwise it returns false (0).

j:text:insert_touches_selection

Usage

j:text:insert_touches_selection t

Argument

t is the text widget whose situation you want to query

Description

This procedure returns true (1) if there is currently a selection in text widget t and t's insert point is within or next to the selection. Otherwise it returns false (0).


j:text:tagged_insert

Usage

j:text:tagged_insert t list

Arguments

t is the text widget the text is to be inserted into
list is a list of text ranges and the tags to apply to them, described below

Example

j:text:tagged_insert $info {
{Warning:} {bold red}
{ can't open } {}
{errlog} {typewriter}
{ for writing.} {}
}

Description

This procedure is essentially a wrapper around the (Tk4.0 and above) text widget insert command. The list argument contains pairs of strings and corresponding lists of tags. Each string (even­numbered elements of list) is inserted into t, tagged with all the corresponding tags (the following odd­numbered element of list), and no others. In the example above, for instance, the string Warning: is inserted into text widget $info, and tagged with the bold and red tags. All text is inserted at the widget's insert mark (and after insertion, the insert mark is left after the newly­inserted text).

Bugs and Misfeatures

Future Directions