This manual is for GNU Autoconf (version 2.57, 2 December 2002), a package for creating scripts to configure source code packages using templates and an M4 macro package. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with no Invariant Sections, with the Front-Cover texts being "A GNU Manual," and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled "GNU Free Documentation License." (a) The FSF's Back-Cover Text is: "You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development." copying START-INFO-DIR-ENTRY * Autoconf: (autoconf). Create source code configuration scripts END-INFO-DIR-ENTRY START-INFO-DIR-ENTRY * autoscan: (autoconf)autoscan Invocation. Semi-automatic `configure.ac' writing * ifnames: (autoconf)ifnames Invocation. Listing the conditionals in source code * autoconf: (autoconf)autoconf Invocation. How to create configuration scripts * autoreconf: (autoconf)autoreconf Invocation. Remaking multiple `configure' scripts * autoheader: (autoconf)autoheader Invocation. How to create configuration templates * autom4te: (autoconf)autom4te Invocation. The Autoconf executables backbone * configure: (autoconf)configure Invocation. Configuring a package * autoupdate: (autoconf)autoupdate Invocation. Automatic update of `configure.ac' * config.status: (autoconf)config.status Invocation. Recreating a configuration * testsuite: (autoconf)testsuite Invocation. Running an Autotest test suite END-INFO-DIR-ENTRY ...Table of Contents... Autoconf ******** Introduction ************ A physicist, an engineer, and a computer scientist were discussing the nature of God. "Surely a Physicist," said the physicist, "because early in the Creation, God made Light; and you know, Maxwell's equations, the dual nature of electromagnetic waves, the relativistic consequences..." "An Engineer!," said the engineer, "because before making Light, God split the Chaos into Land and Water; it takes a hell of an engineer to handle that big amount of mud, and orderly separation of solids from liquids..." The computer scientist shouted: "And the Chaos, where do you think it was coming from, hmm?" --Anonymous Autoconf is a tool for producing shell scripts that automatically configure software source code packages to adapt to many kinds of UNIX-like systems. The configuration scripts produced by Autoconf are independent of Autoconf when they are run, so their users do not need to have Autoconf. The configuration scripts produced by Autoconf require no manual user intervention when run; they do not normally even need an argument specifying the system type. Instead, they individually test for the presence of each feature that the software package they are for might need. (Before each check, they print a one-line message stating what they are checking for, so the user doesn't get too bored while waiting for the script to finish.) As a result, they deal well with systems that are hybrids or customized from the more common UNIX variants. There is no need to maintain files that list the features supported by each release of each variant of UNIX. For each software package that Autoconf is used with, it creates a configuration script from a template file that lists the system features that the package needs or can use. After the shell code to recognize and respond to a system feature has been written, Autoconf allows it to be shared by many software packages that can use (or need) that feature. If it later turns out that the shell code needs adjustment for some reason, it needs to be changed in only one place; all of the configuration scripts can be regenerated automatically to take advantage of the updated code. The Metaconfig package is similar in purpose to Autoconf, but the scripts it produces require manual user intervention, which is quite inconvenient when configuring large source trees. Unlike Metaconfig scripts, Autoconf scripts can support cross-compiling, if some care is taken in writing them. Autoconf does not solve all problems related to making portable software packages--for a more complete solution, it should be used in concert with other GNU build tools like Automake and Libtool. These other tools take on jobs like the creation of a portable, recursive `Makefile' with all of the standard targets, linking of shared libraries, and so on. *Note The GNU Build System::, for more information. Autoconf imposes some restrictions on the names of macros used with `#if' in C programs (*note Preprocessor Symbol Index::). Autoconf requires GNU M4 in order to generate the scripts. It uses features that some UNIX versions of M4, including GNU M4 1.3, do not have. You must use version 1.4 or later of GNU M4. *Note Autoconf 1::, for information about upgrading from version 1. *Note History::, for the story of Autoconf's development. *Note FAQ::, for answers to some common questions about Autoconf. See the Autoconf web page(1) for up-to-date information, details on the mailing lists, pointers to a list of known bugs, etc. Mail suggestions to the Autoconf mailing list . Bug reports should be preferably submitted to the Autoconf Gnats database(2), or sent to the Autoconf Bugs mailing list . If possible, first check that your bug is not already solved in current development versions, and that it has not been reported yet. Be sure to include all the needed information and a short `configure.ac' that demonstrates the problem. Autoconf's development tree is accessible via CVS; see the Autoconf web page for details. There is also a CVSweb interface to the Autoconf development tree(3). Patches relative to the current CVS version can be sent for review to the Autoconf Patches mailing list . Because of its mission, Autoconf includes only a set of often-used macros that have already demonstrated their usefulness. Nevertheless, if you wish to share your macros, or find existing ones, see the Autoconf Macro Archive(4), which is kindly run by Peter Simons . ---------- Footnotes ---------- (1) Autoconf web page, . (2) Autoconf Gnats database, . (3) CVSweb interface to the Autoconf development tree, . (4) Autoconf Macro Archive, . The GNU Build System ******************** Autoconf solves an important problem--reliable discovery of system-specific build and run-time information--but this is only one piece of the puzzle for the development of portable software. To this end, the GNU project has developed a suite of integrated utilities to finish the job Autoconf started: the GNU build system, whose most important components are Autoconf, Automake, and Libtool. In this chapter, we introduce you to those tools, point you to sources of more information, and try to convince you to use the entire GNU build system for your software. Automake ======== The ubiquity of `make' means that a `Makefile' is almost the only viable way to distribute automatic build rules for software, but one quickly runs into `make''s numerous limitations. Its lack of support for automatic dependency tracking, recursive builds in subdirectories, reliable timestamps (e.g., for network filesystems), and so on, mean that developers must painfully (and often incorrectly) reinvent the wheel for each project. Portability is non-trivial, thanks to the quirks of `make' on many systems. On top of all this is the manual labor required to implement the many standard targets that users have come to expect (`make install', `make distclean', `make uninstall', etc.). Since you are, of course, using Autoconf, you also have to insert repetitive code in your `Makefile.in' to recognize `@CC@', `@CFLAGS@', and other substitutions provided by `configure'. Into this mess steps "Automake". Automake allows you to specify your build needs in a `Makefile.am' file with a vastly simpler and more powerful syntax than that of a plain `Makefile', and then generates a portable `Makefile.in' for use with Autoconf. For example, the `Makefile.am' to build and install a simple "Hello world" program might look like: bin_PROGRAMS = hello hello_SOURCES = hello.c The resulting `Makefile.in' (~400 lines) automatically supports all the standard targets, the substitutions provided by Autoconf, automatic dependency tracking, `VPATH' building, and so on. `make' will build the `hello' program, and `make install' will install it in `/usr/local/bin' (or whatever prefix was given to `configure', if not `/usr/local'). Automake may require that additional tools be present on the _developer's_ machine. For example, the `Makefile.in' that the developer works with may not be portable (e.g., it might use special features of your compiler to automatically generate dependency information). Running `make dist', however, produces a `hello-1.0.tar.gz' package (or whatever the program/version is) with a `Makefile.in' that will work on any system. The benefits of Automake increase for larger packages (especially ones with subdirectories), but even for small programs the added convenience and portability can be substantial. And that's not all.... Libtool ======= Very often, one wants to build not only programs, but libraries, so that other programs can benefit from the fruits of your labor. Ideally, one would like to produce _shared_ (dynamically linked) libraries, which can be used by multiple programs without duplication on disk or in memory and can be updated independently of the linked programs. Producing shared libraries portably, however, is the stuff of nightmares--each system has its own incompatible tools, compiler flags, and magic incantations. Fortunately, GNU provides a solution: "Libtool". Libtool handles all the requirements of building shared libraries for you, and at this time seems to be the _only_ way to do so with any portability. It also handles many other headaches, such as: the interaction of `Makefile' rules with the variable suffixes of shared libraries, linking reliably with shared libraries before they are installed by the superuser, and supplying a consistent versioning system (so that different versions of a library can be installed or upgraded without breaking binary compatibility). Although Libtool, like Autoconf, can be used on its own, it is most simply utilized in conjunction with Automake--there, Libtool is used automatically whenever shared libraries are needed, and you need not know its syntax. Pointers ======== Developers who are used to the simplicity of `make' for small projects on a single system might be daunted at the prospect of learning to use Automake and Autoconf. As your software is distributed to more and more users, however, you will otherwise quickly find yourself putting lots of effort into reinventing the services that the GNU build tools provide, and making the same mistakes that they once made and overcame. (Besides, since you're already learning Autoconf, Automake will be a piece of cake.) There are a number of places that you can go to for more information on the GNU build tools. - Web The home pages for Autoconf(1), Automake(2), and Libtool(3). - Automake Manual *Note Automake: (automake)Top, for more information on Automake. - Books The book `GNU Autoconf, Automake and Libtool'(4) describes the complete GNU build environment. You can also find the entire book on-line at "The Goat Book" home page(5). - Tutorials and Examples The Autoconf Developer Page(6) maintains links to a number of Autoconf/Automake tutorials online, and also links to the Autoconf Macro Archive(7). ---------- Footnotes ---------- (1) Autoconf, . (2) Automake, . (3) Libtool, . (4) `GNU Autoconf, Automake and Libtool', by G. V. Vaughan, B. Elliston, T. Tromey, and I. L. Taylor. New Riders, 2000, ISBN 1578701902. (5) "The Goat Book" home page, . (6) Autoconf Developer Page, . (7) Autoconf Macro Archive, . Making `configure' Scripts ************************** The configuration scripts that Autoconf produces are by convention called `configure'. When run, `configure' creates several files, replacing configuration parameters in them with appropriate values. The files that `configure' creates are: - one or more `Makefile' files, usually one in each subdirectory of the package (*note Makefile Substitutions::); - optionally, a C header file, the name of which is configurable, containing `#define' directives (*note Configuration Headers::); - a shell script called `config.status' that, when run, will recreate the files listed above (*note config.status Invocation::); - an optional shell script normally called `config.cache' (created when using `configure --config-cache') that saves the results of running many of the tests (*note Cache Files::); - a file called `config.log' containing any messages produced by compilers, to help debugging if `configure' makes a mistake. To create a `configure' script with Autoconf, you need to write an Autoconf input file `configure.ac' (or `configure.in') and run `autoconf' on it. If you write your own feature tests to supplement those that come with Autoconf, you might also write files called `aclocal.m4' and `acsite.m4'. If you use a C header file to contain `#define' directives, you might also run `autoheader', and you will distribute the generated file `config.h.in' with the package. Here is a diagram showing how the files that can be used in configuration are produced. Programs that are executed are suffixed by `*'. Optional files are enclosed in square brackets (`[]'). `autoconf' and `autoheader' also read the installed Autoconf macro files (by reading `autoconf.m4'). Files used in preparing a software package for distribution: your source files --> [autoscan*] --> [configure.scan] --> configure.ac configure.ac --. | .------> autoconf* -----> configure [aclocal.m4] --+---+ | `-----> [autoheader*] --> [config.h.in] [acsite.m4] ---' Makefile.in -------------------------------> Makefile.in Files used in configuring a software package: .-------------> [config.cache] configure* ------------+-------------> config.log | [config.h.in] -. v .-> [config.h] -. +--> config.status* -+ +--> make* Makefile.in ---' `-> Makefile ---' Writing `configure.ac' ====================== To produce a `configure' script for a software package, create a file called `configure.ac' that contains invocations of the Autoconf macros that test the system features your package needs or can use. Autoconf macros already exist to check for many features; see *Note Existing Tests::, for their descriptions. For most other features, you can use Autoconf template macros to produce custom checks; see *Note Writing Tests::, for information about them. For especially tricky or specialized features, `configure.ac' might need to contain some hand-crafted shell commands; see *Note Portable Shell::. The `autoscan' program can give you a good start in writing `configure.ac' (*note autoscan Invocation::, for more information). Previous versions of Autoconf promoted the name `configure.in', which is somewhat ambiguous (the tool needed to process this file is not described by its extension), and introduces a slight confusion with `config.h.in' and so on (for which `.in' means "to be processed by `configure'"). Using `configure.ac' is now preferred. A Shell Script Compiler ----------------------- Just as for any other computer language, in order to properly program `configure.ac' in Autoconf you must understand _what_ problem the language tries to address and _how_ it does so. The problem Autoconf addresses is that the world is a mess. After all, you are using Autoconf in order to have your package compile easily on all sorts of different systems, some of them being extremely hostile. Autoconf itself bears the price for these differences: `configure' must run on all those systems, and thus `configure' must limit itself to their lowest common denominator of features. Naturally, you might then think of shell scripts; who needs `autoconf'? A set of properly written shell functions is enough to make it easy to write `configure' scripts by hand. Sigh! Unfortunately, shell functions do not belong to the least common denominator; therefore, where you would like to define a function and use it ten times, you would instead need to copy its body ten times. So, what is really needed is some kind of compiler, `autoconf', that takes an Autoconf program, `configure.ac', and transforms it into a portable shell script, `configure'. How does `autoconf' perform this task? There are two obvious possibilities: creating a brand new language or extending an existing one. The former option is very attractive: all sorts of optimizations could easily be implemented in the compiler and many rigorous checks could be performed on the Autoconf program (e.g., rejecting any non-portable construct). Alternatively, you can extend an existing language, such as the `sh' (Bourne shell) language. Autoconf does the latter: it is a layer on top of `sh'. It was therefore most convenient to implement `autoconf' as a macro expander: a program that repeatedly performs "macro expansions" on text input, replacing macro calls with macro bodies and producing a pure `sh' script in the end. Instead of implementing a dedicated Autoconf macro expander, it is natural to use an existing general-purpose macro language, such as M4, and implement the extensions as a set of M4 macros. The Autoconf Language --------------------- The Autoconf language is very different from many other computer languages because it treats actual code the same as plain text. Whereas in C, for instance, data and instructions have very different syntactic status, in Autoconf their status is rigorously the same. Therefore, we need a means to distinguish literal strings from text to be expanded: quotation. When calling macros that take arguments, there must not be any blank space between the macro name and the open parenthesis. Arguments should be enclosed within the M4 quote characters `[' and `]', and be separated by commas. Any leading spaces in arguments are ignored, unless they are quoted. You may safely leave out the quotes when the argument is simple text, but _always_ quote complex arguments such as other macro calls. This rule applies recursively for every macro call, including macros called from other macros. For instance: AC_CHECK_HEADER([stdio.h], [AC_DEFINE([HAVE_STDIO_H])], [AC_MSG_ERROR([Sorry, can't do anything for you])]) is quoted properly. You may safely simplify its quotation to: AC_CHECK_HEADER(stdio.h, [AC_DEFINE(HAVE_STDIO_H)], [AC_MSG_ERROR([Sorry, can't do anything for you])]) Notice that the argument of `AC_MSG_ERROR' is still quoted; otherwise, its comma would have been interpreted as an argument separator. The following example is wrong and dangerous, as it is underquoted: AC_CHECK_HEADER(stdio.h, AC_DEFINE(HAVE_STDIO_H), AC_MSG_ERROR([Sorry, can't do anything for you])) In other cases, you may have to use text that also resembles a macro call. You must quote that text even when it is not passed as a macro argument: echo "Hard rock was here! --[AC_DC]" which will result in echo "Hard rock was here! --AC_DC" When you use the same text in a macro argument, you must therefore have an extra quotation level (since one is stripped away by the macro substitution). In general, then, it is a good idea to _use double quoting for all literal string arguments_: AC_MSG_WARN([[AC_DC stinks --Iron Maiden]]) You are now able to understand one of the constructs of Autoconf that has been continually misunderstood... The rule of thumb is that _whenever you expect macro expansion, expect quote expansion_; i.e., expect one level of quotes to be lost. For instance: AC_COMPILE_IFELSE([char b[10];],, [AC_MSG_ERROR([you lose])]) is incorrect: here, the first argument of `AC_COMPILE_IFELSE' is `char b[10];' and will be expanded once, which results in `char b10;'. (There was an idiom common in Autoconf's past to address this issue via the M4 `changequote' primitive, but do not use it!) Let's take a closer look: the author meant the first argument to be understood as a literal, and therefore it must be quoted twice: AC_COMPILE_IFELSE([[char b[10];]],, [AC_MSG_ERROR([you lose])]) Voila`, you actually produce `char b[10];' this time! The careful reader will notice that, according to these guidelines, the "properly" quoted `AC_CHECK_HEADER' example above is actually lacking three pairs of quotes! Nevertheless, for the sake of readability, double quotation of literals is used only where needed in this manual. Some macros take optional arguments, which this documentation represents as [ARG] (not to be confused with the quote characters). You may just leave them empty, or use `[]' to make the emptiness of the argument explicit, or you may simply omit the trailing commas. The three lines below are equivalent: AC_CHECK_HEADERS(stdio.h, [], [], []) AC_CHECK_HEADERS(stdio.h,,,) AC_CHECK_HEADERS(stdio.h) It is best to put each macro call on its own line in `configure.ac'. Most of the macros don't add extra newlines; they rely on the newline after the macro call to terminate the commands. This approach makes the generated `configure' script a little easier to read by not inserting lots of blank lines. It is generally safe to set shell variables on the same line as a macro call, because the shell allows assignments without intervening newlines. You can include comments in `configure.ac' files by starting them with the `#'. For example, it is helpful to begin `configure.ac' files with a line like this: # Process this file with autoconf to produce a configure script. Standard `configure.ac' Layout ------------------------------ The order in which `configure.ac' calls the Autoconf macros is not important, with a few exceptions. Every `configure.ac' must contain a call to `AC_INIT' before the checks, and a call to `AC_OUTPUT' at the end (*note Output::). Additionally, some macros rely on other macros having been called first, because they check previously set values of some variables to decide what to do. These macros are noted in the individual descriptions (*note Existing Tests::), and they also warn you when `configure' is created if they are called out of order. To encourage consistency, here is a suggested order for calling the Autoconf macros. Generally speaking, the things near the end of this list are those that could depend on things earlier in it. For example, library functions could be affected by types and libraries. Autoconf requirements `AC_INIT(PACKAGE, VERSION, BUG-REPORT-ADDRESS)' information on the package checks for programs checks for libraries checks for header files checks for types checks for structures checks for compiler characteristics checks for library functions checks for system services `AC_CONFIG_FILES([FILE...])' `AC_OUTPUT' Using `autoscan' to Create `configure.ac' ========================================= The `autoscan' program can help you create and/or maintain a `configure.ac' file for a software package. `autoscan' examines source files in the directory tree rooted at a directory given as a command line argument, or the current directory if none is given. It searches the source files for common portability problems and creates a file `configure.scan' which is a preliminary `configure.ac' for that package, and checks a possibly existing `configure.ac' for completeness. When using `autoscan' to create a `configure.ac', you should manually examine `configure.scan' before renaming it to `configure.ac'; it will probably need some adjustments. Occasionally, `autoscan' outputs a macro in the wrong order relative to another macro, so that `autoconf' produces a warning; you need to move such macros manually. Also, if you want the package to use a configuration header file, you must add a call to `AC_CONFIG_HEADERS' (*note Configuration Headers::). You might also have to change or add some `#if' directives to your program in order to make it work with Autoconf (*note ifnames Invocation::, for information about a program that can help with that job). When using `autoscan' to maintain a `configure.ac', simply consider adding its suggestions. The file `autoscan.log' will contain detailed information on why a macro is requested. `autoscan' uses several data files (installed along with Autoconf) to determine which macros to output when it finds particular symbols in a package's source files. These data files all have the same format: each line consists of a symbol, whitespace, and the Autoconf macro to output if that symbol is encountered. Lines starting with `#' are comments. `autoscan' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Print the names of the files it examines and the potentially interesting symbols it finds in them. This output can be voluminous. `--include=DIR' `-I DIR' Append DIR to the include path. Multiple invocations accumulate. `--prepend-include=DIR' `-B DIR' Prepend DIR to the include path. Multiple invocations accumulate. Using `ifnames' to List Conditionals ==================================== `ifnames' can help you write `configure.ac' for a software package. It prints the identifiers that the package already uses in C preprocessor conditionals. If a package has already been set up to have some portability, `ifnames' can thus help you figure out what its `configure' needs to check for. It may help fill in some gaps in a `configure.ac' generated by `autoscan' (*note autoscan Invocation::). `ifnames' scans all of the C source files named on the command line (or the standard input, if none are given) and writes to the standard output a sorted list of all the identifiers that appear in those files in `#if', `#elif', `#ifdef', or `#ifndef' directives. It prints each identifier on a line, followed by a space-separated list of the files in which that identifier occurs. `ifnames' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. Using `autoconf' to Create `configure' ====================================== To create `configure' from `configure.ac', run the `autoconf' program with no arguments. `autoconf' processes `configure.ac' with the M4 macro processor, using the Autoconf macros. If you give `autoconf' an argument, it reads that file instead of `configure.ac' and writes the configuration script to the standard output instead of to `configure'. If you give `autoconf' the argument `-', it reads from the standard input instead of `configure.ac' and writes the configuration script to the standard output. The Autoconf macros are defined in several files. Some of the files are distributed with Autoconf; `autoconf' reads them first. Then it looks for the optional file `acsite.m4' in the directory that contains the distributed Autoconf macro files, and for the optional file `aclocal.m4' in the current directory. Those files can contain your site's or the package's own Autoconf macro definitions (*note Writing Autoconf Macros::, for more information). If a macro is defined in more than one of the files that `autoconf' reads, the last definition it reads overrides the earlier ones. `autoconf' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Report processing steps. `--debug' `-d' Don't remove the temporary files. `--force' `-f' Remake `configure' even if newer than its input files. `--include=DIR' `-I DIR' Append DIR to the include path. Multiple invocations accumulate. `--prepend-include=DIR' `-B DIR' Prepend DIR to the include path. Multiple invocations accumulate. `--output=FILE' `-o FILE' Save output (script or trace) to FILE. The file `-' stands for the standard output. `--warnings=CATEGORY' `-W CATEGORY' Report the warnings related to CATEGORY (which can actually be a comma separated list). *Note Reporting Messages::, macro `AC_DIAGNOSE', for a comprehensive list of categories. Special values include: `all' report all the warnings `none' report none `error' treats warnings as errors `no-CATEGORY' disable warnings falling into CATEGORY Warnings about `syntax' are enabled by default, and the environment variable `WARNINGS', a comma separated list of categories, is honored. Passing `-W CATEGORY' will actually behave as if you had passed `--warnings=syntax,$WARNINGS,CATEGORY'. If you want to disable the defaults and `WARNINGS', but (for example) enable the warnings about obsolete constructs, you would use `-W none,obsolete'. Because `autoconf' uses `autom4te' behind the scenes, it displays a back trace for errors, but not for warnings; if you want them, just pass `-W error'. *Note autom4te Invocation::, for some examples. `--trace=MACRO[:FORMAT]' `-t MACRO[:FORMAT]' Do not create the `configure' script, but list the calls to MACRO according to the FORMAT. Multiple `--trace' arguments can be used to list several macros. Multiple `--trace' arguments for a single macro are not cumulative; instead, you should just make FORMAT as long as needed. The FORMAT is a regular string, with newlines if desired, and several special escape codes. It defaults to `$f:$l:$n:$%'; see *Note autom4te Invocation::, for details on the FORMAT. `--initialization' `-i' By default, `--trace' does not trace the initialization of the Autoconf macros (typically the `AC_DEFUN' definitions). This results in a noticeable speedup, but can be disabled by this option. It is often necessary to check the content of a `configure.ac' file, but parsing it yourself is extremely fragile and error-prone. It is suggested that you rely upon `--trace' to scan `configure.ac'. For instance, to find the list of variables that are substituted, use: $ autoconf -t AC_SUBST configure.ac:2:AC_SUBST:ECHO_C configure.ac:2:AC_SUBST:ECHO_N configure.ac:2:AC_SUBST:ECHO_T More traces deleted The example below highlights the difference between `$@', `$*', and *$%*. $ cat configure.ac AC_DEFINE(This, is, [an [example]]) $ autoconf -t 'AC_DEFINE:@: $@ *: $* $: $%' @: [This],[is],[an [example]] *: This,is,an [example] $: This:is:an [example] The FORMAT gives you a lot of freedom: $ autoconf -t 'AC_SUBST:$$ac_subst{"$1"} = "$f:$l";' $ac_subst{"ECHO_C"} = "configure.ac:2"; $ac_subst{"ECHO_N"} = "configure.ac:2"; $ac_subst{"ECHO_T"} = "configure.ac:2"; More traces deleted A long SEPARATOR can be used to improve the readability of complex structures, and to ease their parsing (for instance when no single character is suitable as a separator): $ autoconf -t 'AM_MISSING_PROG:${|:::::|}*' ACLOCAL|:::::|aclocal|:::::|$missing_dir AUTOCONF|:::::|autoconf|:::::|$missing_dir AUTOMAKE|:::::|automake|:::::|$missing_dir More traces deleted Using `autoreconf' to Update `configure' Scripts ================================================ Installing the various components of the GNU Build System can be tedious: running `autopoint' for Gettext, `automake' for `Makefile.in' etc. in each directory. It may be needed either because some tools such as `automake' have been updated on your system, or because some of the sources such as `configure.ac' have been updated, or finally, simply in order to install the GNU Build System in a fresh tree. `autoreconf' runs `autoconf', `autoheader', `aclocal', `automake', `libtoolize', and `autopoint' (when appropriate) repeatedly to update the GNU Build System in the specified directories and their subdirectories (*note Subdirectories::). By default, it only remakes those files that are older than their sources. If you install a new version of some tool, you can make `autoreconf' remake _all_ of the files by giving it the `--force' option. *Note Automatic Remaking::, for `Makefile' rules to automatically remake `configure' scripts when their source files change. That method handles the timestamps of configuration header templates properly, but does not pass `--autoconf-dir=DIR' or `--localdir=DIR'. `autoreconf' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' Print the name of each directory where `autoreconf' runs `autoconf' (and `autoheader', if appropriate). `--debug' `-d' Don't remove the temporary files. `--force' `-f' Remake even `configure' scripts and configuration headers that are newer than their input files (`configure.ac' and, if present, `aclocal.m4'). `--install' `-i' Install the missing auxiliary files in the package. By default, files are copied; this can be changed with `--symlink'. This option triggers calls to `automake --add-missing', `libtoolize', `autopoint', etc. `--symlink' `-s' When used with `--install', install symbolic links to the missing auxiliary files instead of copying them. `--make' `-m' When the directories were configured, update the configuration by running `./config.status --recheck && ./config.status', and then run `make'. `--include=DIR' `-I DIR' Append DIR to the include path. Multiple invocations accumulate. `--prepend-include=DIR' `-B DIR' Prepend DIR to the include path. Multiple invocations accumulate. `--warnings=CATEGORY' `-W CATEGORY' Report the warnings related to CATEGORY (which can actually be a comma separated list). `cross' related to cross compilation issues. `obsolete' report the uses of obsolete constructs. `portability' portability issues `syntax' dubious syntactic constructs. `all' report all the warnings `none' report none `error' treats warnings as errors `no-CATEGORY' disable warnings falling into CATEGORY Warnings about `syntax' are enabled by default, and the environment variable `WARNINGS', a comma separated list of categories, is honored. Passing `-W CATEGORY' will actually behave as if you had passed `--warnings=syntax,$WARNINGS,CATEGORY'. If you want to disable the defaults and `WARNINGS', but (for example) enable the warnings about obsolete constructs, you would use `-W none,obsolete'. Initialization and Output Files ******************************* Autoconf-generated `configure' scripts need some information about how to initialize, such as how to find the package's source files and about the output files to produce. The following sections describe the initialization and the creation of output files. Initializing `configure' ======================== Every `configure' script must call `AC_INIT' before doing anything else. The only other required macro is `AC_OUTPUT' (*note Output::). - Macro: AC_INIT (PACKAGE, VERSION, [BUG-REPORT], [TARNAME]) Process any command-line arguments and perform various initializations and verifications. Set the name of the PACKAGE and its VERSION. These are typically used in `--version' support, including that of `configure'. The optional argument BUG-REPORT should be the email to which users should send bug reports. The package TARNAME differs from PACKAGE: the latter designates the full package name (e.g., `GNU Autoconf'), while the former is meant for distribution tar ball names (e.g., `autoconf'). It defaults to PACKAGE with `GNU ' stripped, lower-cased, and all characters other than alphanumerics and underscores are changed to `-'. It is preferable that the arguments of `AC_INIT' be static, i.e., there should not be any shell computation, but they can be computed by M4. The following M4 macros (e.g., `AC_PACKAGE_NAME'), output variables (e.g., `PACKAGE_NAME'), and preprocessor symbols (e.g., `PACKAGE_NAME') are defined by `AC_INIT': `AC_PACKAGE_NAME', `PACKAGE_NAME' Exactly PACKAGE. `AC_PACKAGE_TARNAME', `PACKAGE_TARNAME' Exactly TARNAME. `AC_PACKAGE_VERSION', `PACKAGE_VERSION' Exactly VERSION. `AC_PACKAGE_STRING', `PACKAGE_STRING' Exactly `PACKAGE VERSION'. `AC_PACKAGE_BUGREPORT', `PACKAGE_BUGREPORT' Exactly BUG-REPORT. Notices in `configure' ====================== The following macros manage version numbers for `configure' scripts. Using them is optional. - Macro: AC_PREREQ (VERSION) Ensure that a recent enough version of Autoconf is being used. If the version of Autoconf being used to create `configure' is earlier than VERSION, print an error message to the standard error output and do not create `configure'. For example: AC_PREREQ(2.57) This macro is the only macro that may be used before `AC_INIT', but for consistency, you are invited not to do so. - Macro: AC_COPYRIGHT (COPYRIGHT-NOTICE) State that, in addition to the Free Software Foundation's copyright on the Autoconf macros, parts of your `configure' are covered by the COPYRIGHT-NOTICE. The COPYRIGHT-NOTICE will show up in both the head of `configure' and in `configure --version'. - Macro: AC_REVISION (REVISION-INFO) Copy revision stamp REVISION-INFO into the `configure' script, with any dollar signs or double-quotes removed. This macro lets you put a revision stamp from `configure.ac' into `configure' without RCS or CVS changing it when you check in `configure'. That way, you can determine easily which revision of `configure.ac' a particular `configure' corresponds to. For example, this line in `configure.ac': AC_REVISION($Revision: 1.30 $) produces this in `configure': #! /bin/sh # From configure.ac Revision: 1.30 Finding `configure' Input ========================= - Macro: AC_CONFIG_SRCDIR (UNIQUE-FILE-IN-SOURCE-DIR) UNIQUE-FILE-IN-SOURCE-DIR is some file that is in the package's source directory; `configure' checks for this file's existence to make sure that the directory that it is told contains the source code in fact does. Occasionally people accidentally specify the wrong directory with `--srcdir'; this is a safety check. *Note configure Invocation::, for more information. Packages that do manual configuration or use the `install' program might need to tell `configure' where to find some other shell scripts by calling `AC_CONFIG_AUX_DIR', though the default places it looks are correct for most cases. - Macro: AC_CONFIG_AUX_DIR (DIR) Use the auxiliary build tools (e.g., `install-sh', `config.sub', `config.guess', Cygnus `configure', Automake and Libtool scripts etc.) that are in directory DIR. These are auxiliary files used in configuration. DIR can be either absolute or relative to `SRCDIR'. The default is `SRCDIR' or `SRCDIR/..' or `SRCDIR/../..', whichever is the first that contains `install-sh'. The other files are not checked for, so that using `AC_PROG_INSTALL' does not automatically require distributing the other auxiliary files. It checks for `install.sh' also, but that name is obsolete because some `make' have a rule that creates `install' from it if there is no `Makefile'. Outputting Files ================ Every Autoconf script, e.g., `configure.ac', should finish by calling `AC_OUTPUT'. That is the macro that generates `config.status', which will create the `Makefile's and any other files resulting from configuration. This is the only required macro besides `AC_INIT' (*note Input::). - Macro: AC_OUTPUT Generate `config.status' and launch it. Call this macro once, at the end of `configure.ac'. `config.status' will perform all the configuration actions: all the output files (see *Note Configuration Files::, macro `AC_CONFIG_FILES'), header files (see *Note Configuration Headers::, macro `AC_CONFIG_HEADERS'), commands (see *Note Configuration Commands::, macro `AC_CONFIG_COMMANDS'), links (see *Note Configuration Links::, macro `AC_CONFIG_LINKS'), subdirectories to configure (see *Note Subdirectories::, macro `AC_CONFIG_SUBDIRS') are honored. Historically, the usage of `AC_OUTPUT' was somewhat different. *Note Obsolete Macros::, for a description of the arguments that `AC_OUTPUT' used to support. If you run `make' in subdirectories, you should run it using the `make' variable `MAKE'. Most versions of `make' set `MAKE' to the name of the `make' program plus any options it was given. (But many do not include in it the values of any variables set on the command line, so those are not passed on automatically.) Some old versions of `make' do not set this variable. The following macro allows you to use it even with those versions. - Macro: AC_PROG_MAKE_SET If `make' predefines the Make variable `MAKE', define output variable `SET_MAKE' to be empty. Otherwise, define `SET_MAKE' to contain `MAKE=make'. Calls `AC_SUBST' for `SET_MAKE'. If you use this macro, place a line like this in each `Makefile.in' that runs `MAKE' on other directories: @SET_MAKE@ Performing Configuration Actions ================================ `configure' is designed so that it appears to do everything itself, but there is actually a hidden slave: `config.status'. `configure' is in charge of examining your system, but it is `config.status' that actually takes the proper actions based on the results of `configure'. The most typical task of `config.status' is to _instantiate_ files. This section describes the common behavior of the four standard instantiating macros: `AC_CONFIG_FILES', `AC_CONFIG_HEADERS', `AC_CONFIG_COMMANDS' and `AC_CONFIG_LINKS'. They all have this prototype: AC_CONFIG_FOOS(TAG..., [COMMANDS], [INIT-CMDS]) where the arguments are: TAG... A whitespace-separated list of tags, which are typically the names of the files to instantiate. You are encouraged to use literals as TAGS. In particular, you should avoid ... && my_foos="$my_foos fooo" ... && my_foos="$my_foos foooo" AC_CONFIG_FOOS($my_foos) and use this instead: ... && AC_CONFIG_FOOS(fooo) ... && AC_CONFIG_FOOS(foooo) The macros `AC_CONFIG_FILES' and `AC_CONFIG_HEADERS' use special TAGs: they may have the form `OUTPUT' or `OUTPUT:INPUTS'. The file OUTPUT is instantiated from its templates, INPUTS (defaulting to `OUTPUT.in'). For instance `AC_CONFIG_FILES(Makefile:boiler/top.mk:boiler/bot.mk)' asks for the creation of `Makefile' that will be the expansion of the output variables in the concatenation of `boiler/top.mk' and `boiler/bot.mk'. The special value `-' might be used to denote the standard output when used in OUTPUT, or the standard input when used in the INPUTS. You most probably don't need to use this in `configure.ac', but it is convenient when using the command line interface of `./config.status', see *Note config.status Invocation::, for more details. The INPUTS may be absolute or relative filenames. In the latter case they are first looked for in the build tree, and then in the source tree. COMMANDS Shell commands output literally into `config.status', and associated with a tag that the user can use to tell `config.status' which the commands to run. The commands are run each time a TAG request is given to `config.status', typically each time the file `TAG' is created. The variables set during the execution of `configure' are _not_ available here: you first need to set them via the INIT-CMDS. Nonetheless the following variables are precomputed: `srcdir' The path from the top build directory to the top source directory. This is what `configure''s option `--srcdir' sets. `ac_top_srcdir' The path from the current build directory to the top source directory. `ac_top_builddir' The path from the current build directory to the top build directory. It can be empty, or else ends with a slash, so that you may concatenate it. `ac_srcdir' The path from the current build directory to the corresponding source directory. The "current" directory refers to the directory (or pseudo-directory) containing the input part of TAGS. For instance, running AC_CONFIG_COMMANDS([deep/dir/out:in/in.in], [...], [...]) with `--srcdir=../package' produces the following values: # Argument of --srcdir srcdir='../package' # Reversing deep/dir ac_top_builddir='../../' # Concatenation of $ac_top_builddir and srcdir ac_top_srcdir='../../../package' # Concatenation of $ac_top_srcdir and deep/dir ac_srcdir='../../../package/deep/dir' independently of `in/in.in'. INIT-CMDS Shell commands output _unquoted_ near the beginning of `config.status', and executed each time `config.status' runs (regardless of the tag). Because they are unquoted, for example, `$var' will be output as the value of `var'. INIT-CMDS is typically used by `configure' to give `config.status' some variables it needs to run the COMMANDS. You should be extremely cautious in your variable names: all the INIT-CMDS share the same name space and may overwrite each other in unpredictable ways. Sorry.... All these macros can be called multiple times, with different TAGs, of course! Creating Configuration Files ============================ Be sure to read the previous section, *Note Configuration Actions::. - Macro: AC_CONFIG_FILES (FILE..., [CMDS], [INIT-CMDS]) Make `AC_OUTPUT' create each `FILE' by copying an input file (by default `FILE.in'), substituting the output variable values. This macro is one of the instantiating macros; see *Note Configuration Actions::. *Note Makefile Substitutions::, for more information on using output variables. *Note Setting Output Variables::, for more information on creating them. This macro creates the directory that the file is in if it doesn't exist. Usually, `Makefile's are created this way, but other files, such as `.gdbinit', can be specified as well. Typical calls to `AC_CONFIG_FILES' look like this: AC_CONFIG_FILES([Makefile src/Makefile man/Makefile X/Imakefile]) AC_CONFIG_FILES([autoconf], [chmod +x autoconf]) You can override an input file name by appending to FILE a colon-separated list of input files. Examples: AC_CONFIG_FILES([Makefile:boiler/top.mk:boiler/bot.mk] [lib/Makefile:boiler/lib.mk]) Doing this allows you to keep your file names acceptable to MS-DOS, or to prepend and/or append boilerplate to the file. Substitutions in Makefiles ========================== Each subdirectory in a distribution that contains something to be compiled or installed should come with a file `Makefile.in', from which `configure' will create a `Makefile' in that directory. To create a `Makefile', `configure' performs a simple variable substitution, replacing occurrences of `@VARIABLE@' in `Makefile.in' with the value that `configure' has determined for that variable. Variables that are substituted into output files in this way are called "output variables". They are ordinary shell variables that are set in `configure'. To make `configure' substitute a particular variable into the output files, the macro `AC_SUBST' must be called with that variable name as an argument. Any occurrences of `@VARIABLE@' for other variables are left unchanged. *Note Setting Output Variables::, for more information on creating output variables with `AC_SUBST'. A software package that uses a `configure' script should be distributed with a file `Makefile.in', but no `Makefile'; that way, the user has to properly configure the package for the local system before compiling it. *Note Makefile Conventions: (standards)Makefile Conventions, for more information on what to put in `Makefile's. Preset Output Variables ----------------------- Some output variables are preset by the Autoconf macros. Some of the Autoconf macros set additional output variables, which are mentioned in the descriptions for those macros. *Note Output Variable Index::, for a complete list of output variables. *Note Installation Directory Variables::, for the list of the preset ones related to installation directories. Below are listed the other preset ones. They all are precious variables (*note Setting Output Variables::, `AC_ARG_VAR'). - Variable: CFLAGS Debugging and optimization options for the C compiler. If it is not set in the environment when `configure' runs, the default value is set when you call `AC_PROG_CC' (or empty if you don't). `configure' uses this variable when compiling programs to test for C features. - Variable: configure_input A comment saying that the file was generated automatically by `configure' and giving the name of the input file. `AC_OUTPUT' adds a comment line containing this variable to the top of every `Makefile' it creates. For other files, you should reference this variable in a comment at the top of each input file. For example, an input shell script should begin like this: #! /bin/sh # @configure_input@ The presence of that line also reminds people editing the file that it needs to be processed by `configure' in order to be used. - Variable: CPPFLAGS Header file search directory (`-IDIR') and any other miscellaneous options for the C and C++ preprocessors and compilers. If it is not set in the environment when `configure' runs, the default value is empty. `configure' uses this variable when compiling or preprocessing programs to test for C and C++ features. - Variable: CXXFLAGS Debugging and optimization options for the C++ compiler. If it is not set in the environment when `configure' runs, the default value is set when you call `AC_PROG_CXX' (or empty if you don't). `configure' uses this variable when compiling programs to test for C++ features. - Variable: DEFS `-D' options to pass to the C compiler. If `AC_CONFIG_HEADERS' is called, `configure' replaces `@DEFS@' with `-DHAVE_CONFIG_H' instead (*note Configuration Headers::). This variable is not defined while `configure' is performing its tests, only when creating the output files. *Note Setting Output Variables::, for how to check the results of previous tests. - Variable: ECHO_C - Variable: ECHO_N - Variable: ECHO_T How does one suppress the trailing newline from `echo' for question-answer message pairs? These variables provide a way: echo $ECHO_N "And the winner is... $ECHO_C" sleep 100000000000 echo "${ECHO_T}dead." Some old and uncommon `echo' implementations offer no means to achieve this, in which case `ECHO_T' is set to tab. You might not want to use it. - Variable: FFLAGS Debugging and optimization options for the Fortran 77 compiler. If it is not set in the environment when `configure' runs, the default value is set when you call `AC_PROG_F77' (or empty if you don't). `configure' uses this variable when compiling programs to test for Fortran 77 features. - Variable: LDFLAGS Stripping (`-s'), path (`-L'), and any other miscellaneous options for the linker. Don't use this variable to pass library names (`-l') to the linker, use `LIBS' instead. If it is not set in the environment when `configure' runs, the default value is empty. `configure' uses this variable when linking programs to test for C, C++ and Fortran 77 features. - Variable: LIBS `-l' options to pass to the linker. The default value is empty, but some Autoconf macros may prepend extra libraries to this variable if those libraries are found and provide necessary functions, see *Note Libraries::. `configure' uses this variable when linking programs to test for C, C++ and Fortran 77 features. - Variable: builddir Rigorously equal to `.'. Added for symmetry only. - Variable: abs_builddir Absolute path of `builddir'. - Variable: top_builddir The relative path to the top-level of the current build tree. In the top-level directory, this is the same as `builddir'. - Variable: abs_top_builddir Absolute path of `top_builddir'. - Variable: srcdir The relative path to the directory that contains the source code for that `Makefile'. - Variable: abs_srcdir Absolute path of `srcdir'. - Variable: top_srcdir The relative path to the top-level source code directory for the package. In the top-level directory, this is the same as `srcdir'. - Variable: abs_top_srcdir Absolute path of `top_srcdir'. Installation Directory Variables -------------------------------- The following variables specify the directories where the package will be installed, see *Note Variables for Installation Directories: (standards)Directory Variables, for more information. See the end of this section for details on when and how to use these variables. - Variable: bindir The directory for installing executables that users run. - Variable: datadir The directory for installing read-only architecture-independent data. - Variable: exec_prefix The installation prefix for architecture-dependent files. By default it's the same as PREFIX. You should avoid installing anything directly to EXEC_PREFIX. However, the default value for directories containing architecture-dependent files should be relative to EXEC_PREFIX. - Variable: includedir The directory for installing C header files. - Variable: infodir The directory for installing documentation in Info format. - Variable: libdir The directory for installing object code libraries. - Variable: libexecdir The directory for installing executables that other programs run. - Variable: localstatedir The directory for installing modifiable single-machine data. - Variable: mandir The top-level directory for installing documentation in man format. - Variable: oldincludedir The directory for installing C header files for non-GCC compilers. - Variable: prefix The common installation prefix for all files. If EXEC_PREFIX is defined to a different value, PREFIX is used only for architecture-independent files. - Variable: sbindir The directory for installing executables that system administrators run. - Variable: sharedstatedir The directory for installing modifiable architecture-independent data. - Variable: sysconfdir The directory for installing read-only single-machine data. Most of these variables have values that rely on `prefix' or `exec_prefix'. It is deliberate that the directory output variables keep them unexpanded: typically `@datadir@' will be replaced by `${prefix}/share', not `/usr/local/share'. This behavior is mandated by the GNU coding standards, so that when the user runs: `make' she can still specify a different prefix from the one specified to `configure', in which case, if needed, the package shall hard code dependencies corresponding to the make-specified prefix. `make install' she can specify a different installation location, in which case the package _must_ still depend on the location which was compiled in (i.e., never recompile when `make install' is run). This is an extremely important feature, as many people may decide to install all the files of a package grouped together, and then install links from the final locations to there. In order to support these features, it is essential that `datadir' remains being defined as `${prefix}/share' to depend upon the current value of `prefix'. A corollary is that you should not use these variables except in Makefiles. For instance, instead of trying to evaluate `datadir' in `configure' and hard-coding it in Makefiles using e.g., `AC_DEFINE_UNQUOTED(DATADIR, "$datadir")', you should add `-DDATADIR="$(datadir)"' to your `CPPFLAGS'. Similarly you should not rely on `AC_OUTPUT_FILES' to replace `datadir' and friends in your shell scripts and other files, rather let `make' manage their replacement. For instance Autoconf ships templates of its shell scripts ending with `.in', and uses a Makefile snippet similar to: edit = sed \ -e 's,@datadir\@,$(pkgdatadir),g' \ -e 's,@prefix\@,$(prefix),g' autoconf: Makefile $(srcdir)/autoconf.in rm -f autoconf autoconf.tmp $(edit) $(srcdir)/autoconf.in >autoconf.tmp chmod +x autoconf.tmp mv autoconf.tmp autoconf autoheader: Makefile $(srcdir)/autoheader.in rm -f autoheader autoheader.tmp $(edit) $(srcdir)/autoconf.in >autoheader.tmp chmod +x autoheader.tmp mv autoheader.tmp autoheader Some details are noteworthy: `@datadir\@' The backslash prevents `configure' from replacing `@datadir@' in the sed expression itself. `$(pkgdatadir)' Don't use `@pkgdatadir@'! Use the matching makefile variable instead. `,' Don't use `/' in the sed expression(s) since most likely the variables you use, such as `$(pkgdatadir)', will contain some. `Dependency on `Makefile'' Since `edit' uses values that depend on the configuration specific values (`prefix' etc.) and not only on `VERSION' and so forth, the output depends on `Makefile', not `configure.ac'. `Separated dependencies and Single Suffix Rules' You can't use them! The above snippet cannot be (portably) rewritten as: autoconf autoheader: Makefile .in: rm -f $@ $@.tmp $(edit) $< >$@.tmp chmod +x $@.tmp mv $@.tmp $@ *Note Limitations of Make::, for details. ``$(srcdir)'' Be sure to specify the path to the sources, otherwise the package won't support separated builds. Build Directories ----------------- You can support compiling a software package for several architectures simultaneously from the same copy of the source code. The object files for each architecture are kept in their own directory. To support doing this, `make' uses the `VPATH' variable to find the files that are in the source directory. GNU Make and most other recent `make' programs can do this. Older `make' programs do not support `VPATH'; when using them, the source code must be in the same directory as the object files. To support `VPATH', each `Makefile.in' should contain two lines that look like: srcdir = @srcdir@ VPATH = @srcdir@ Do not set `VPATH' to the value of another variable, for example `VPATH = $(srcdir)', because some versions of `make' do not do variable substitutions on the value of `VPATH'. `configure' substitutes the correct value for `srcdir' when it produces `Makefile'. Do not use the `make' variable `$<', which expands to the file name of the file in the source directory (found with `VPATH'), except in implicit rules. (An implicit rule is one such as `.c.o', which tells how to create a `.o' file from a `.c' file.) Some versions of `make' do not set `$<' in explicit rules; they expand it to an empty value. Instead, `Makefile' command lines should always refer to source files by prefixing them with `$(srcdir)/'. For example: time.info: time.texinfo $(MAKEINFO) $(srcdir)/time.texinfo Automatic Remaking ------------------ You can put rules like the following in the top-level `Makefile.in' for a package to automatically update the configuration information when you change the configuration files. This example includes all of the optional files, such as `aclocal.m4' and those related to configuration header files. Omit from the `Makefile.in' rules for any of these files that your package does not use. The `$(srcdir)/' prefix is included because of limitations in the `VPATH' mechanism. The `stamp-' files are necessary because the timestamps of `config.h.in' and `config.h' will not be changed if remaking them does not change their contents. This feature avoids unnecessary recompilation. You should include the file `stamp-h.in' your package's distribution, so `make' will consider `config.h.in' up to date. Don't use `touch' (*note Limitations of Usual Tools::), rather use `echo' (using `date' would cause needless differences, hence CVS conflicts etc.). $(srcdir)/configure: configure.ac aclocal.m4 cd $(srcdir) && autoconf # autoheader might not change config.h.in, so touch a stamp file. $(srcdir)/config.h.in: stamp-h.in $(srcdir)/stamp-h.in: configure.ac aclocal.m4 cd $(srcdir) && autoheader echo timestamp > $(srcdir)/stamp-h.in config.h: stamp-h stamp-h: config.h.in config.status ./config.status Makefile: Makefile.in config.status ./config.status config.status: configure ./config.status --recheck (Be careful if you copy these lines directly into your Makefile, as you will need to convert the indented lines to start with the tab character.) In addition, you should use `AC_CONFIG_FILES([stamp-h], [echo timestamp > stamp-h])' so `config.status' will ensure that `config.h' is considered up to date. *Note Output::, for more information about `AC_OUTPUT'. *Note config.status Invocation::, for more examples of handling configuration-related dependencies. Configuration Header Files ========================== When a package contains more than a few tests that define C preprocessor symbols, the command lines to pass `-D' options to the compiler can get quite long. This causes two problems. One is that the `make' output is hard to visually scan for errors. More seriously, the command lines can exceed the length limits of some operating systems. As an alternative to passing `-D' options to the compiler, `configure' scripts can create a C header file containing `#define' directives. The `AC_CONFIG_HEADERS' macro selects this kind of output. It should be called right after `AC_INIT'. The package should `#include' the configuration header file before any other header files, to prevent inconsistencies in declarations (for example, if it redefines `const'). Use `#include ' instead of `#include "config.h"', and pass the C compiler a `-I.' option (or `-I..'; whichever directory contains `config.h'). That way, even if the source directory is configured itself (perhaps to make a distribution), other build directories can also be configured without finding the `config.h' from the source directory. - Macro: AC_CONFIG_HEADERS (HEADER ..., [CMDS], [INIT-CMDS]) This macro is one of the instantiating macros; see *Note Configuration Actions::. Make `AC_OUTPUT' create the file(s) in the whitespace-separated list HEADER containing C preprocessor `#define' statements, and replace `@DEFS@' in generated files with `-DHAVE_CONFIG_H' instead of the value of `DEFS'. The usual name for HEADER is `config.h'. If HEADER already exists and its contents are identical to what `AC_OUTPUT' would put in it, it is left alone. Doing this allows making some changes in the configuration without needlessly causing object files that depend on the header file to be recompiled. Usually the input file is named `HEADER.in'; however, you can override the input file name by appending to HEADER a colon-separated list of input files. Examples: AC_CONFIG_HEADERS([config.h:config.hin]) AC_CONFIG_HEADERS([defines.h:defs.pre:defines.h.in:defs.post]) Doing this allows you to keep your file names acceptable to MS-DOS, or to prepend and/or append boilerplate to the file. *Note Configuration Actions::, for more details on HEADER. Configuration Header Templates ------------------------------ Your distribution should contain a template file that looks as you want the final header file to look, including comments, with `#undef' statements which are used as hooks. For example, suppose your `configure.ac' makes these calls: AC_CONFIG_HEADERS([conf.h]) AC_CHECK_HEADERS([unistd.h]) Then you could have code like the following in `conf.h.in'. On systems that have `unistd.h', `configure' will `#define' `HAVE_UNISTD_H' to 1. On other systems, the whole line will be commented out (in case the system predefines that symbol). /* Define as 1 if you have unistd.h. */ #undef HAVE_UNISTD_H Pay attention that `#undef' is in the first column, and there is nothing behind `HAVE_UNISTD_H', not even white spaces. You can then decode the configuration header using the preprocessor directives: #include #if HAVE_UNISTD_H # include #else /* We are in trouble. */ #endif The use of old form templates, with `#define' instead of `#undef' is strongly discouraged. Similarly with old templates with comments on the same line as the `#undef'. Anyway, putting comments in preprocessor macros has never been a good idea. Since it is a tedious task to keep a template header up to date, you may use `autoheader' to generate it, see *Note autoheader Invocation::. Using `autoheader' to Create `config.h.in' ------------------------------------------ The `autoheader' program can create a template file of C `#define' statements for `configure' to use. If `configure.ac' invokes `AC_CONFIG_HEADERS(FILE)', `autoheader' creates `FILE.in'; if multiple file arguments are given, the first one is used. Otherwise, `autoheader' creates `config.h.in'. In order to do its job, `autoheader' needs you to document all of the symbols that you might use; i.e., there must be at least one `AC_DEFINE' or one `AC_DEFINE_UNQUOTED' call with a third argument for each symbol (*note Defining Symbols::). An additional constraint is that the first argument of `AC_DEFINE' must be a literal. Note that all symbols defined by Autoconf's builtin tests are already documented properly; you only need to document those that you define yourself. You might wonder why `autoheader' is needed: after all, why would `configure' need to "patch" a `config.h.in' to produce a `config.h' instead of just creating `config.h' from scratch? Well, when everything rocks, the answer is just that we are wasting our time maintaining `autoheader': generating `config.h' directly is all that is needed. When things go wrong, however, you'll be thankful for the existence of `autoheader'. The fact that the symbols are documented is important in order to _check_ that `config.h' makes sense. The fact that there is a well-defined list of symbols that should be `#define''d (or not) is also important for people who are porting packages to environments where `configure' cannot be run: they just have to _fill in the blanks_. But let's come back to the point: `autoheader''s invocation... If you give `autoheader' an argument, it uses that file instead of `configure.ac' and writes the header file to the standard output instead of to `config.h.in'. If you give `autoheader' an argument of `-', it reads the standard input instead of `configure.ac' and writes the header file to the standard output. `autoheader' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Report processing steps. `--debug' `-d' Don't remove the temporary files. `--force' `-f' Remake the template file even if newer than its input files. `--include=DIR' `-I DIR' Append DIR to include path. Multiple invocations accumulate. `--prepend-include=DIR' `-B DIR' Prepend DIR to include path. Multiple invocations accumulate. `--warnings=CATEGORY' `-W CATEGORY' Report the warnings related to CATEGORY (which can actually be a comma separated list). Current categories include: `obsolete' report the uses of obsolete constructs `all' report all the warnings `none' report none `error' treats warnings as errors `no-CATEGORY' disable warnings falling into CATEGORY Autoheader Macros ----------------- `autoheader' scans `configure.ac' and figures out which C preprocessor symbols it might define. It knows how to generate templates for symbols defined by `AC_CHECK_HEADERS', `AC_CHECK_FUNCS' etc., but if you `AC_DEFINE' any additional symbol, you must define a template for it. If there are missing templates, `autoheader' fails with an error message. The simplest way to create a template for a SYMBOL is to supply the DESCRIPTION argument to an `AC_DEFINE(SYMBOL)'; see *Note Defining Symbols::. You may also use one of the following macros. - Macro: AH_VERBATIM (KEY, TEMPLATE) Tell `autoheader' to include the TEMPLATE as-is in the header template file. This TEMPLATE is associated with the KEY, which is used to sort all the different templates and guarantee their uniqueness. It should be a symbol that can be `AC_DEFINE''d. For example: AH_VERBATIM([_GNU_SOURCE], [/* Enable GNU extensions on systems that have them. */ #ifndef _GNU_SOURCE # define _GNU_SOURCE #endif]) - Macro: AH_TEMPLATE (KEY, DESCRIPTION) Tell `autoheader' to generate a template for KEY. This macro generates standard templates just like `AC_DEFINE' when a DESCRIPTION is given. For example: AH_TEMPLATE([CRAY_STACKSEG_END], [Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. This function is required for alloca.c support on those systems.]) will generate the following template, with the description properly justified. /* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. This function is required for alloca.c support on those systems. */ #undef CRAY_STACKSEG_END - Macro: AH_TOP (TEXT) Include TEXT at the top of the header template file. - Macro: AH_BOTTOM (TEXT) Include TEXT at the bottom of the header template file. Running Arbitrary Configuration Commands ======================================== You can execute arbitrary commands before, during, and after `config.status' is run. The three following macros accumulate the commands to run when they are called multiple times. `AC_CONFIG_COMMANDS' replaces the obsolete macro `AC_OUTPUT_COMMANDS'; see *Note Obsolete Macros::, for details. - Macro: AC_CONFIG_COMMANDS (TAG..., [CMDS], [INIT-CMDS]) Specify additional shell commands to run at the end of `config.status', and shell commands to initialize any variables from `configure'. Associate the commands with TAG. Since typically the CMDS create a file, TAG should naturally be the name of that file. This macro is one of the instantiating macros; see *Note Configuration Actions::. Here is an unrealistic example: fubar=42 AC_CONFIG_COMMANDS([fubar], [echo this is extra $fubar, and so on.], [fubar=$fubar]) Here is a better one: AC_CONFIG_COMMANDS([time-stamp], [date >time-stamp]) - Macro: AC_CONFIG_COMMANDS_PRE (CMDS) Execute the CMDS right before creating `config.status'. - Macro: AC_CONFIG_COMMANDS_POST (CMDS) Execute the CMDS right after creating `config.status'. Creating Configuration Links ============================ You may find it convenient to create links whose destinations depend upon results of tests. One can use `AC_CONFIG_COMMANDS' but the creation of relative symbolic links can be delicate when the package is built in a directory different from the source directory. - Macro: AC_CONFIG_LINKS (DEST:SOURCE..., [CMDS], [INIT-CMDS]) Make `AC_OUTPUT' link each of the existing files SOURCE to the corresponding link name DEST. Makes a symbolic link if possible, otherwise a hard link if possible, otherwise a copy. The DEST and SOURCE names should be relative to the top level source or build directory. This macro is one of the instantiating macros; see *Note Configuration Actions::. For example, this call: AC_CONFIG_LINKS(host.h:config/$machine.h object.h:config/$obj_format.h) creates in the current directory `host.h' as a link to `SRCDIR/config/$machine.h', and `object.h' as a link to `SRCDIR/config/$obj_format.h'. The tempting value `.' for DEST is invalid: it makes it impossible for `config.status' to guess the links to establish. One can then run: ./config.status host.h object.h to create the links. Configuring Other Packages in Subdirectories ============================================ In most situations, calling `AC_OUTPUT' is sufficient to produce `Makefile's in subdirectories. However, `configure' scripts that control more than one independent package can use `AC_CONFIG_SUBDIRS' to run `configure' scripts for other packages in subdirectories. - Macro: AC_CONFIG_SUBDIRS (DIR ...) Make `AC_OUTPUT' run `configure' in each subdirectory DIR in the given whitespace-separated list. Each DIR should be a literal, i.e., please do not use: if test "$package_foo_enabled" = yes; then $my_subdirs="$my_subdirs foo" fi AC_CONFIG_SUBDIRS($my_subdirs) because this prevents `./configure --help=recursive' from displaying the options of the package `foo'. Rather, you should write: if test "$package_foo_enabled" = yes; then AC_CONFIG_SUBDIRS(foo) fi If a given DIR is not found, an error is reported: if the subdirectory is optional, write: if test -d $srcdir/foo; then AC_CONFIG_SUBDIRS(foo) fi If a given DIR contains `configure.gnu', it is run instead of `configure'. This is for packages that might use a non-Autoconf script `Configure', which can't be called through a wrapper `configure' since it would be the same file on case-insensitive filesystems. Likewise, if a DIR contains `configure.in' but no `configure', the Cygnus `configure' script found by `AC_CONFIG_AUX_DIR' is used. The subdirectory `configure' scripts are given the same command line options that were given to this `configure' script, with minor changes if needed, which include: - adjusting a relative path for the cache file; - adjusting a relative path for the source directory; - propagating the current value of `$prefix', including if it was defaulted, and if the default values of the top level and of the subdirectory `configure' differ. This macro also sets the output variable `subdirs' to the list of directories `DIR ...'. `Makefile' rules can use this variable to determine which subdirectories to recurse into. This macro may be called multiple times. Default Prefix ============== By default, `configure' sets the prefix for files it installs to `/usr/local'. The user of `configure' can select a different prefix using the `--prefix' and `--exec-prefix' options. There are two ways to change the default: when creating `configure', and when running it. Some software packages might want to install in a directory other than `/usr/local' by default. To accomplish that, use the `AC_PREFIX_DEFAULT' macro. - Macro: AC_PREFIX_DEFAULT (PREFIX) Set the default installation prefix to PREFIX instead of `/usr/local'. It may be convenient for users to have `configure' guess the installation prefix from the location of a related program that they have already installed. If you wish to do that, you can call `AC_PREFIX_PROGRAM'. - Macro: AC_PREFIX_PROGRAM (PROGRAM) If the user did not specify an installation prefix (using the `--prefix' option), guess a value for it by looking for PROGRAM in `PATH', the way the shell does. If PROGRAM is found, set the prefix to the parent of the directory containing PROGRAM, else default the prefix as described above (`/usr/local' or `AC_PREFIX_DEFAULT'). For example, if PROGRAM is `gcc' and the `PATH' contains `/usr/local/gnu/bin/gcc', set the prefix to `/usr/local/gnu'. Existing Tests ************** These macros test for particular system features that packages might need or want to use. If you need to test for a kind of feature that none of these macros check for, you can probably do it by calling primitive test macros with appropriate arguments (*note Writing Tests::). These tests print messages telling the user which feature they're checking for, and what they find. They cache their results for future `configure' runs (*note Caching Results::). Some of these macros set output variables. *Note Makefile Substitutions::, for how to get their values. The phrase "define NAME" is used below as a shorthand to mean "define C preprocessor symbol NAME to the value 1". *Note Defining Symbols::, for how to get those symbol definitions into your program. Common Behavior =============== Much effort has been expended to make Autoconf easy to learn. The most obvious way to reach this goal is simply to enforce standard interfaces and behaviors, avoiding exceptions as much as possible. Because of history and inertia, unfortunately, there are still too many exceptions in Autoconf; nevertheless, this section describes some of the common rules. Standard Symbols ---------------- All the generic macros that `AC_DEFINE' a symbol as a result of their test transform their ARGUMENTs to a standard alphabet. First, ARGUMENT is converted to upper case and any asterisks (`*') are each converted to `P'. Any remaining characters that are not alphanumeric are converted to underscores. For instance, AC_CHECK_TYPES(struct $Expensive*) will define the symbol `HAVE_STRUCT__EXPENSIVEP' if the check succeeds. Default Includes ---------------- Several tests depend upon a set of header files. Since these headers are not universally available, tests actually have to provide a set of protected includes, such as: #if TIME_WITH_SYS_TIME # include # include #else # if HAVE_SYS_TIME_H # include # else # include # endif #endif Unless you know exactly what you are doing, you should avoid using unconditional includes, and check the existence of the headers you include beforehand (*note Header Files::). Most generic macros provide the following default set of includes: #include #if HAVE_SYS_TYPES_H # include #endif #if HAVE_SYS_STAT_H # include #endif #if STDC_HEADERS # include # include #else # if HAVE_STDLIB_H # include # endif #endif #if HAVE_STRING_H # if !STDC_HEADERS && HAVE_MEMORY_H # include # endif # include #endif #if HAVE_STRINGS_H # include #endif #if HAVE_INTTYPES_H # include #else # if HAVE_STDINT_H # include # endif #endif #if HAVE_UNISTD_H # include #endif If the default includes are used, then Autoconf will automatically check for the presence of these headers and their compatibility, i.e., you don't need to run `AC_HEADERS_STDC', nor check for `stdlib.h' etc. These headers are checked for in the same order as they are included. For instance, on some systems `string.h' and `strings.h' both exist, but conflict. Then `HAVE_STRING_H' will be defined, but `HAVE_STRINGS_H' won't. Alternative Programs ==================== These macros check for the presence or behavior of particular programs. They are used to choose between several alternative programs and to decide what to do once one has been chosen. If there is no macro specifically defined to check for a program you need, and you don't need to check for any special properties of it, then you can use one of the general program-check macros. Particular Program Checks ------------------------- These macros check for particular programs--whether they exist, and in some cases whether they support certain features. - Macro: AC_PROG_AWK Check for `gawk', `mawk', `nawk', and `awk', in that order, and set output variable `AWK' to the first one that is found. It tries `gawk' first because that is reported to be the best implementation. - Macro: AC_PROG_EGREP Check for `grep -E' and `egrep', in that order, and set output variable `EGREP' to the first one that is found. - Macro: AC_PROG_FGREP Check for `grep -F' and `fgrep', in that order, and set output variable `FGREP' to the first one that is found. - Macro: AC_PROG_INSTALL Set output variable `INSTALL' to the path of a BSD-compatible `install' program, if one is found in the current `PATH'. Otherwise, set `INSTALL' to `DIR/install-sh -c', checking the directories specified to `AC_CONFIG_AUX_DIR' (or its default directories) to determine DIR (*note Output::). Also set the variables `INSTALL_PROGRAM' and `INSTALL_SCRIPT' to `${INSTALL}' and `INSTALL_DATA' to `${INSTALL} -m 644'. This macro screens out various instances of `install' known not to work. It prefers to find a C program rather than a shell script, for speed. Instead of `install-sh', it can also use `install.sh', but that name is obsolete because some `make' programs have a rule that creates `install' from it if there is no `Makefile'. Autoconf comes with a copy of `install-sh' that you can use. If you use `AC_PROG_INSTALL', you must include either `install-sh' or `install.sh' in your distribution, or `configure' will produce an error message saying it can't find them--even if the system you're on has a good `install' program. This check is a safety measure to prevent you from accidentally leaving that file out, which would prevent your package from installing on systems that don't have a BSD-compatible `install' program. If you need to use your own installation program because it has features not found in standard `install' programs, there is no reason to use `AC_PROG_INSTALL'; just put the file name of your program into your `Makefile.in' files. - Macro: AC_PROG_LEX If `flex' is found, set output variable `LEX' to `flex' and `LEXLIB' to `-lfl', if that library is in a standard place. Otherwise set `LEX' to `lex' and `LEXLIB' to `-ll'. Define `YYTEXT_POINTER' if `yytext' is a `char *' instead of a `char []'. Also set output variable `LEX_OUTPUT_ROOT' to the base of the file name that the lexer generates; usually `lex.yy', but sometimes something else. These results vary according to whether `lex' or `flex' is being used. You are encouraged to use Flex in your sources, since it is both more pleasant to use than plain Lex and the C source it produces is portable. In order to ensure portability, however, you must either provide a function `yywrap' or, if you don't use it (e.g., your scanner has no `#include'-like feature), simply include a `%noyywrap' statement in the scanner's source. Once this done, the scanner is portable (unless _you_ felt free to use nonportable constructs) and does not depend on any library. In this case, and in this case only, it is suggested that you use this Autoconf snippet: AC_PROG_LEX if test "$LEX" != flex; then LEX="$SHELL $missing_dir/missing flex" AC_SUBST(LEX_OUTPUT_ROOT, lex.yy) AC_SUBST(LEXLIB, '') fi The shell script `missing' can be found in the Automake distribution. To ensure backward compatibility, Automake's `AM_PROG_LEX' invokes (indirectly) this macro twice, which will cause an annoying but benign "`AC_PROG_LEX' invoked multiple times" warning. Future versions of Automake will fix this issue; meanwhile, just ignore this message. - Macro: AC_PROG_LN_S If `ln -s' works on the current file system (the operating system and file system support symbolic links), set the output variable `LN_S' to `ln -s'; otherwise, if `ln' works, set `LN_S' to `ln', and otherwise set it to `cp -p'. If you make a link in a directory other than the current directory, its meaning depends on whether `ln' or `ln -s' is used. To safely create links using `$(LN_S)', either find out which form is used and adjust the arguments, or always invoke `ln' in the directory where the link is to be created. In other words, it does not work to do: $(LN_S) foo /x/bar Instead, do: (cd /x && $(LN_S) foo bar) - Macro: AC_PROG_RANLIB Set output variable `RANLIB' to `ranlib' if `ranlib' is found, and otherwise to `:' (do nothing). - Macro: AC_PROG_YACC If `bison' is found, set output variable `YACC' to `bison -y'. Otherwise, if `byacc' is found, set `YACC' to `byacc'. Otherwise set `YACC' to `yacc'. Generic Program and File Checks ------------------------------- These macros are used to find programs not covered by the "particular" test macros. If you need to check the behavior of a program as well as find out whether it is present, you have to write your own test for it (*note Writing Tests::). By default, these macros use the environment variable `PATH'. If you need to check for a program that might not be in the user's `PATH', you can pass a modified path to use instead, like this: AC_PATH_PROG([INETD], [inetd], [/usr/libexec/inetd], [$PATH:/usr/libexec:/usr/sbin:/usr/etc:etc]) You are strongly encouraged to declare the VARIABLE passed to `AC_CHECK_PROG' etc. as precious, *Note Setting Output Variables::, `AC_ARG_VAR', for more details. - Macro: AC_CHECK_PROG (VARIABLE, PROG-TO-CHECK-FOR, VALUE-IF-FOUND, [VALUE-IF-NOT-FOUND], [PATH], [REJECT]) Check whether program PROG-TO-CHECK-FOR exists in `PATH'. If it is found, set VARIABLE to VALUE-IF-FOUND, otherwise to VALUE-IF-NOT-FOUND, if given. Always pass over REJECT (an absolute file name) even if it is the first found in the search path; in that case, set VARIABLE using the absolute file name of the PROG-TO-CHECK-FOR found that is not REJECT. If VARIABLE was already set, do nothing. Calls `AC_SUBST' for VARIABLE. - Macro: AC_CHECK_PROGS (VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH]) Check for each program in the whitespace-separated list PROGS-TO-CHECK-FOR existing in the `PATH'. If one is found, set VARIABLE to the name of that program. Otherwise, continue checking the next program in the list. If none of the programs in the list are found, set VARIABLE to VALUE-IF-NOT-FOUND; if VALUE-IF-NOT-FOUND is not specified, the value of VARIABLE is not changed. Calls `AC_SUBST' for VARIABLE. - Macro: AC_CHECK_TOOL (VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH]) Like `AC_CHECK_PROG', but first looks for PROG-TO-CHECK-FOR with a prefix of the host type as determined by `AC_CANONICAL_HOST', followed by a dash (*note Canonicalizing::). For example, if the user runs `configure --host=i386-gnu', then this call: AC_CHECK_TOOL(RANLIB, ranlib, :) sets `RANLIB' to `i386-gnu-ranlib' if that program exists in `PATH', or otherwise to `ranlib' if that program exists in `PATH', or to `:' if neither program exists. - Macro: AC_CHECK_TOOLS (VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH]) Like `AC_CHECK_TOOL', each of the tools in the list PROGS-TO-CHECK-FOR are checked with a prefix of the host type as determined by `AC_CANONICAL_HOST', followed by a dash (*note Canonicalizing::). If none of the tools can be found with a prefix, then the first one without a prefix is used. If a tool is found, set VARIABLE to the name of that program. If none of the tools in the list are found, set VARIABLE to VALUE-IF-NOT-FOUND; if VALUE-IF-NOT-FOUND is not specified, the value of VARIABLE is not changed. Calls `AC_SUBST' for VARIABLE. - Macro: AC_PATH_PROG (VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH]) Like `AC_CHECK_PROG', but set VARIABLE to the entire path of PROG-TO-CHECK-FOR if found. - Macro: AC_PATH_PROGS (VARIABLE, PROGS-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH]) Like `AC_CHECK_PROGS', but if any of PROGS-TO-CHECK-FOR are found, set VARIABLE to the entire path of the program found. - Macro: AC_PATH_TOOL (VARIABLE, PROG-TO-CHECK-FOR, [VALUE-IF-NOT-FOUND], [PATH]) Like `AC_CHECK_TOOL', but set VARIABLE to the entire path of the program if it is found. Files ===== You might also need to check for the existence of files. Before using these macros, ask yourself whether a run-time test might not be a better solution. Be aware that, like most Autoconf macros, they test a feature of the host machine, and therefore, they die when cross-compiling. - Macro: AC_CHECK_FILE (FILE, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) Check whether file FILE exists on the native system. If it is found, execute ACTION-IF-FOUND, otherwise do ACTION-IF-NOT-FOUND, if given. - Macro: AC_CHECK_FILES (FILES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) Executes `AC_CHECK_FILE' once for each file listed in FILES. Additionally, defines `HAVE_FILE' (*note Standard Symbols::) for each file found. Library Files ============= The following macros check for the presence of certain C, C++, or Fortran 77 library archive files. - Macro: AC_CHECK_LIB (LIBRARY, FUNCTION, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES]) Depending on the current language(*note Language Choice::), try to ensure that the C, C++, or Fortran 77 function FUNCTION is available by checking whether a test program can be linked with the library LIBRARY to get the function. LIBRARY is the base name of the library; e.g., to check for `-lmp', use `mp' as the LIBRARY argument. ACTION-IF-FOUND is a list of shell commands to run if the link with the library succeeds; ACTION-IF-NOT-FOUND is a list of shell commands to run if the link fails. If ACTION-IF-FOUND is not specified, the default action will prepend `-lLIBRARY' to `LIBS' and define `HAVE_LIBLIBRARY' (in all capitals). This macro is intended to support building `LIBS' in a right-to-left (least-dependent to most-dependent) fashion such that library dependencies are satisfied as a natural side-effect of consecutive tests. Some linkers are very sensitive to library ordering so the order in which `LIBS' is generated is important to reliable detection of libraries. If linking with LIBRARY results in unresolved symbols that would be resolved by linking with additional libraries, give those libraries as the OTHER-LIBRARIES argument, separated by spaces: e.g., `-lXt -lX11'. Otherwise, this macro will fail to detect that LIBRARY is present, because linking the test program will always fail with unresolved symbols. The OTHER-LIBRARIES argument should be limited to cases where it is desirable to test for one library in the presence of another that is not already in `LIBS'. - Macro: AC_SEARCH_LIBS (FUNCTION, SEARCH-LIBS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES]) Search for a library defining FUNCTION if it's not already available. This equates to calling `AC_LINK_IFELSE([AC_LANG_CALL([], [FUNCTION])])' first with no libraries, then for each library listed in SEARCH-LIBS. Add `-lLIBRARY' to `LIBS' for the first library found to contain FUNCTION, and run ACTION-IF-FOUND. If the function is not found, run ACTION-IF-NOT-FOUND. If linking with LIBRARY results in unresolved symbols that would be resolved by linking with additional libraries, give those libraries as the OTHER-LIBRARIES argument, separated by spaces: e.g., `-lXt -lX11'. Otherwise, this macro will fail to detect that FUNCTION is present, because linking the test program will always fail with unresolved symbols. Library Functions ================= The following macros check for particular C library functions. If there is no macro specifically defined to check for a function you need, and you don't need to check for any special properties of it, then you can use one of the general function-check macros. Portability of C Functions -------------------------- Most usual functions can either be missing, or be buggy, or be limited on some architectures. This section tries to make an inventory of these portability issues. By definition, this list will always require additions. Please help us keeping it as complete as possible. `exit' Did you know that, on some older hosts, `exit' returns `int'? This is because `exit' predates `void', and there was a long tradition of it returning `int'. `snprintf' The ISO C99 standard says that if the output array isn't big enough and if no other errors occur, `snprintf' and `vsnprintf' truncate the output and return the number of bytes that ought to have been produced. Some older systems return the truncated length (e.g., GNU C Library 2.0.x or IRIX 6.5), some a negative value (e.g., earlier GNU C Library versions), and some the buffer length without truncation (e.g., 32-bit Solaris 7). Also, some buggy older systems ignore the length and overrun the buffer (e.g., 64-bit Solaris 7). `sprintf' The ISO C standard says `sprintf' and `vsprintf' return the number of bytes written, but on some old systems (SunOS 4 for instance) they return the buffer pointer instead. `sscanf' On various old systems, e.g., HP-UX 9, `sscanf' requires that its input string be writable (though it doesn't actually change it). This can be a problem when using `gcc' since it normally puts constant strings in read-only memory (*note Incompatibilities of GCC: (gcc)Incompatibilities.). Apparently in some cases even having format strings read-only can be a problem. `strnlen' AIX 4.3 provides a broken version which produces the following results: strnlen ("foobar", 0) = 0 strnlen ("foobar", 1) = 3 strnlen ("foobar", 2) = 2 strnlen ("foobar", 3) = 1 strnlen ("foobar", 4) = 0 strnlen ("foobar", 5) = 6 strnlen ("foobar", 6) = 6 strnlen ("foobar", 7) = 6 strnlen ("foobar", 8) = 6 strnlen ("foobar", 9) = 6 `unlink' The POSIX spec says that `unlink' causes the given file to be removed only after there are no more open file handles for it. Not all OS's support this behavior though. So even on systems that provide `unlink', you cannot portably assume it is OK to call it on files that are open. For example, on Windows 9x and ME, such a call would fail; on DOS it could even lead to file system corruption, as the file might end up being written to after the OS has removed it. `va_copy' The ISO C99 standard provides `va_copy' for copying `va_list' variables. It may be available in older environments too, though possibly as `__va_copy' (e.g., `gcc' in strict C89 mode). These can be tested with `#ifdef'. A fallback to `memcpy (&dst, &src, sizeof(va_list))' will give maximum portability. `va_list' `va_list' is not necessarily just a pointer. It can be a `struct' (e.g., `gcc' on Alpha), which means `NULL' is not portable. Or it can be an array (e.g., `gcc' in some PowerPC configurations), which means as a function parameter it can be effectively call-by-reference and library routines might modify the value back in the caller (e.g., `vsnprintf' in the GNU C Library 2.1). Signed `>>' Normally the C `>>' right shift of a signed type replicates the high bit, giving a so-called "arithmetic" shift. But care should be taken since the ISO C standard doesn't require that behavior. On those few processors without a native arithmetic shift (for instance Cray vector systems) zero bits may be shifted in, the same as a shift of an unsigned type. Particular Function Checks -------------------------- These macros check for particular C functions--whether they exist, and in some cases how they respond when given certain arguments. - Macro: AC_FUNC_ALLOCA Check how to get `alloca'. Tries to get a builtin version by checking for `alloca.h' or the predefined C preprocessor macros `__GNUC__' and `_AIX'. If this macro finds `alloca.h', it defines `HAVE_ALLOCA_H'. If those attempts fail, it looks for the function in the standard C library. If any of those methods succeed, it defines `HAVE_ALLOCA'. Otherwise, it sets the output variable `ALLOCA' to `alloca.o' and defines `C_ALLOCA' (so programs can periodically call `alloca(0)' to garbage collect). This variable is separate from `LIBOBJS' so multiple programs can share the value of `ALLOCA' without needing to create an actual library, in case only some of them use the code in `LIBOBJS'. This macro does not try to get `alloca' from the System V R3 `libPW' or the System V R4 `libucb' because those libraries contain some incompatible functions that cause trouble. Some versions do not even contain `alloca' or contain a buggy version. If you still want to use their `alloca', use `ar' to extract `alloca.o' from them instead of compiling `alloca.c'. Source files that use `alloca' should start with a piece of code like the following, to declare it properly. In some versions of AIX, the declaration of `alloca' must precede everything else except for comments and preprocessor directives. The `#pragma' directive is indented so that pre-ANSI C compilers will ignore it, rather than choke on it. /* AIX requires this to be the first thing in the file. */ #ifndef __GNUC__ # if HAVE_ALLOCA_H # include # else # ifdef _AIX #pragma alloca # else # ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); # endif # endif # endif #endif - Macro: AC_FUNC_CHOWN If the `chown' function is available and works (in particular, it should accept `-1' for `uid' and `gid'), define `HAVE_CHOWN'. - Macro: AC_FUNC_CLOSEDIR_VOID If the `closedir' function does not return a meaningful value, define `CLOSEDIR_VOID'. Otherwise, callers ought to check its return value for an error indicator. - Macro: AC_FUNC_ERROR_AT_LINE If the `error_at_line' function is not found, require an `AC_LIBOBJ' replacement of `error'. - Macro: AC_FUNC_FNMATCH If the `fnmatch' function conforms to POSIX, define `HAVE_FNMATCH'. Detect common implementation bugs, for example, the bugs in Solaris 2.4. Note that for historical reasons, contrary to the other specific `AC_FUNC' macros, `AC_FUNC_FNMATCH' does not replace a broken/missing `fnmatch'. See `AC_REPLACE_FNMATCH' below. - Macro: AC_FUNC_FNMATCH_GNU Behave like `AC_REPLACE_FNMATCH' (_replace_) but also test whether `fnmatch' supports GNU extensions. Detect common implementation bugs, for example, the bugs in the GNU C Library 2.1. - Macro: AC_FUNC_FORK This macro checks for the `fork' and `vfork' functions. If a working `fork' is found, define `HAVE_WORKING_FORK'. This macro checks whether `fork' is just a stub by trying to run it. If `vfork.h' is found, define `HAVE_VFORK_H'. If a working `vfork' is found, define `HAVE_WORKING_VFORK'. Otherwise, define `vfork' to be `fork' for backward compatibility with previous versions of `autoconf'. This macro checks for several known errors in implementations of `vfork' and considers the system to not have a working `vfork' if it detects any of them. It is not considered to be an implementation error if a child's invocation of `signal' modifies the parent's signal handler, since child processes rarely change their signal handlers. Since this macro defines `vfork' only for backward compatibility with previous versions of `autoconf' you're encouraged to define it yourself in new code: #if !HAVE_WORKING_VFORK # define vfork fork #endif - Macro: AC_FUNC_FSEEKO If the `fseeko' function is available, define `HAVE_FSEEKO'. Define `_LARGEFILE_SOURCE' if necessary. - Macro: AC_FUNC_GETGROUPS If the `getgroups' function is available and works (unlike on Ultrix 4.3, where `getgroups (0, 0)' always fails), define `HAVE_GETGROUPS'. Set `GETGROUPS_LIBS' to any libraries needed to get that function. This macro runs `AC_TYPE_GETGROUPS'. - Macro: AC_FUNC_GETLOADAVG Check how to get the system load averages. To perform its tests properly, this macro needs the file `getloadavg.c'; therefore, be sure to set the `AC_LIBOBJ' replacement directory properly (see *Note Generic Functions::, `AC_CONFIG_LIBOBJ_DIR'). If the system has the `getloadavg' function, define `HAVE_GETLOADAVG', and set `GETLOADAVG_LIBS' to any libraries needed to get that function. Also add `GETLOADAVG_LIBS' to `LIBS'. Otherwise, require an `AC_LIBOBJ' replacement for `getloadavg' with source code in `DIR/getloadavg.c', and possibly define several other C preprocessor macros and output variables: 1. Define `C_GETLOADAVG'. 2. Define `SVR4', `DGUX', `UMAX', or `UMAX4_3' if on those systems. 3. If `nlist.h' is found, define `HAVE_NLIST_H'. 4. If `struct nlist' has an `n_un.n_name' member, define `HAVE_STRUCT_NLIST_N_UN_N_NAME'. The obsolete symbol `NLIST_NAME_UNION' is still defined, but do not depend upon it. 5. Programs may need to be installed setgid (or setuid) for `getloadavg' to work. In this case, define `GETLOADAVG_PRIVILEGED', set the output variable `NEED_SETGID' to `true' (and otherwise to `false'), and set `KMEM_GROUP' to the name of the group that should own the installed program. - Macro: AC_FUNC_GETMNTENT Check for `getmntent' in the `sun', `seq', and `gen' libraries, for IRIX 4, PTX, and Unixware, respectively. Then, if `getmntent' is available, define `HAVE_GETMNTENT'. - Macro: AC_FUNC_GETPGRP Define `GETPGRP_VOID' if it is an error to pass 0 to `getpgrp'; this is the POSIX behavior. On older BSD systems, you must pass 0 to `getpgrp', as it takes an argument and behaves like POSIX's `getpgid'. #if GETPGRP_VOID pid = getpgrp (); #else pid = getpgrp (0); #endif This macro does not check whether `getpgrp' exists at all; if you need to work in that situation, first call `AC_CHECK_FUNC' for `getpgrp'. - Macro: AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK If `link' is a symbolic link, then `lstat' should treat `link/' the same as `link/.'. However, many older `lstat' implementations incorrectly ignore trailing slashes. It is safe to assume that if `lstat' incorrectly ignores trailing slashes, then other symbolic-link-aware functions like `unlink' also incorrectly ignore trailing slashes. If `lstat' behaves properly, define `LSTAT_FOLLOWS_SLASHED_SYMLINK', otherwise require an `AC_LIBOBJ' replacement of `lstat'. - Macro: AC_FUNC_MALLOC If the `malloc' function is compatible with the GNU C library `malloc' (i.e., `malloc (0)' returns a valid pointer), define `HAVE_MALLOC' to 1. Otherwise define `HAVE_MALLOC' to 0, ask for an `AC_LIBOBJ' replacement for `malloc', and define `malloc' to `rpl_malloc' so that the native `malloc' is not used in the main project. Typically, the replacement file `malloc.c' should look like (note the `#undef malloc'): #if HAVE_CONFIG_H # include #endif #undef malloc #include void *malloc (); /* Allocate an N-byte block of memory from the heap. If N is zero, allocate a 1-byte block. */ void * rpl_malloc (size_t n) { if (n == 0) n = 1; return malloc (n); } - Macro: AC_FUNC_MEMCMP If the `memcmp' function is not available, or does not work on 8-bit data (like the one on SunOS 4.1.3), or fails when comparing 16 bytes or more and with at least one buffer not starting on a 4-byte boundary (such as the one on NeXT x86 OpenStep), require an `AC_LIBOBJ' replacement for `memcmp'. - Macro: AC_FUNC_MBRTOWC Define `HAVE_MBRTOWC' to 1 if the function `mbrtowc' and the type `mbstate_t' are properly declared. - Macro: AC_FUNC_MKTIME If the `mktime' function is not available, or does not work correctly, require an `AC_LIBOBJ' replacement for `mktime'. - Macro: AC_FUNC_MMAP If the `mmap' function exists and works correctly, define `HAVE_MMAP'. Only checks private fixed mapping of already-mapped memory. - Macro: AC_FUNC_OBSTACK If the obstacks are found, define `HAVE_OBSTACK', else require an `AC_LIBOBJ' replacement for `obstack'. - Macro: AC_FUNC_REALLOC If the `realloc' function is compatible with the GNU C library `realloc' (i.e., `realloc (0, 0)' returns a valid pointer), define `HAVE_REALLOC' to 1. Otherwise define `HAVE_REALLOC' to 0, ask for an `AC_LIBOBJ' replacement for `realloc', and define `realloc' to `rpl_realloc' so that the native `realloc' is not used in the main project. See `AC_FUNC_MALLOC' for details. - Macro: AC_FUNC_SELECT_ARGTYPES Determines the correct type to be passed for each of the `select' function's arguments, and defines those types in `SELECT_TYPE_ARG1', `SELECT_TYPE_ARG234', and `SELECT_TYPE_ARG5' respectively. `SELECT_TYPE_ARG1' defaults to `int', `SELECT_TYPE_ARG234' defaults to `int *', and `SELECT_TYPE_ARG5' defaults to `struct timeval *'. - Macro: AC_FUNC_SETPGRP If `setpgrp' takes no argument (the POSIX version), define `SETPGRP_VOID'. Otherwise, it is the BSD version, which takes two process IDs as arguments. This macro does not check whether `setpgrp' exists at all; if you need to work in that situation, first call `AC_CHECK_FUNC' for `setpgrp'. - Macro: AC_FUNC_STAT - Macro: AC_FUNC_LSTAT Determine whether `stat' or `lstat' have the bug that it succeeds when given the zero-length file name as argument. The `stat' and `lstat' from SunOS 4.1.4 and the Hurd (as of 1998-11-01) do this. If it does, then define `HAVE_STAT_EMPTY_STRING_BUG' (or `HAVE_LSTAT_EMPTY_STRING_BUG') and ask for an `AC_LIBOBJ' replacement of it. - Macro: AC_FUNC_SETVBUF_REVERSED If `setvbuf' takes the buffering type as its second argument and the buffer pointer as the third, instead of the other way around, define `SETVBUF_REVERSED'. - Macro: AC_FUNC_STRCOLL If the `strcoll' function exists and works correctly, define `HAVE_STRCOLL'. This does a bit more than `AC_CHECK_FUNCS(strcoll)', because some systems have incorrect definitions of `strcoll' that should not be used. - Macro: AC_FUNC_STRTOD If the `strtod' function does not exist or doesn't work correctly, ask for an `AC_LIBOBJ' replacement of `strtod'. In this case, because `strtod.c' is likely to need `pow', set the output variable `POW_LIB' to the extra library needed. - Macro: AC_FUNC_STRERROR_R If `strerror_r' is available, define `HAVE_STRERROR_R', and if it is declared, define `HAVE_DECL_STRERROR_R'. If it returns a `char *' message, define `STRERROR_R_CHAR_P'; otherwise it returns an `int' error number. The Thread-Safe Functions option of POSIX requires `strerror_r' to return `int', but many systems (including, for example, version 2.2.4 of the GNU C Library) return a `char *' value that is not necessarily equal to the buffer argument. - Macro: AC_FUNC_STRFTIME Check for `strftime' in the `intl' library, for SCO UNIX. Then, if `strftime' is available, define `HAVE_STRFTIME'. - Macro: AC_FUNC_STRNLEN If the `strnlen' function is not available, or is buggy (like the one from AIX 4.3), require an `AC_LIBOBJ' replacement for it. - Macro: AC_FUNC_UTIME_NULL If `utime(FILE, NULL)' sets FILE's timestamp to the present, define `HAVE_UTIME_NULL'. - Macro: AC_FUNC_VPRINTF If `vprintf' is found, define `HAVE_VPRINTF'. Otherwise, if `_doprnt' is found, define `HAVE_DOPRNT'. (If `vprintf' is available, you may assume that `vfprintf' and `vsprintf' are also available.) - Macro: AC_REPLACE_FNMATCH If the `fnmatch' function does not conform to POSIX (see `AC_FUNC_FNMATCH'), ask for its `AC_LIBOBJ' replacement. The files `fnmatch.c', `fnmatch_loop.c', and `fnmatch_.h' in the `AC_LIBOBJ' replacement directory are assumed to contain a copy of the source code of GNU `fnmatch'. If necessary, this source code is compiled as an `AC_LIBOBJ' replacement, and the `fnmatch_.h' file is linked to `fnmatch.h' so that it can be included in place of the system `'. Generic Function Checks ----------------------- These macros are used to find functions not covered by the "particular" test macros. If the functions might be in libraries other than the default C library, first call `AC_CHECK_LIB' for those libraries. If you need to check the behavior of a function as well as find out whether it is present, you have to write your own test for it (*note Writing Tests::). - Macro: AC_CHECK_FUNC (FUNCTION, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) If C function FUNCTION is available, run shell commands ACTION-IF-FOUND, otherwise ACTION-IF-NOT-FOUND. If you just want to define a symbol if the function is available, consider using `AC_CHECK_FUNCS' instead. This macro checks for functions with C linkage even when `AC_LANG(C++)' has been called, since C is more standardized than C++. (*note Language Choice::, for more information about selecting the language for checks.) - Macro: AC_CHECK_FUNCS (FUNCTION..., [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) For each FUNCTION in the whitespace-separated argument list, define `HAVE_FUNCTION' (in all capitals) if it is available. If ACTION-IF-FOUND is given, it is additional shell code to execute when one of the functions is found. You can give it a value of `break' to break out of the loop on the first match. If ACTION-IF-NOT-FOUND is given, it is executed when one of the functions is not found. Autoconf follows a philosophy that was formed over the years by those who have struggled for portability: isolate the portability issues in specific files, and then program as if you were in a POSIX environment. Some functions may be missing or unfixable, and your package must be ready to replace them. - Macro: AC_LIBOBJ (FUNCTION) Specify that `FUNCTION.c' must be included in the executables to replace a missing or broken implementation of FUNCTION. Technically, it adds `FUNCTION.$ac_objext' to the output variable `LIBOBJS' and calls `AC_LIBSOURCE' for `FUNCTION.c'. You should not directly change `LIBOBJS', since this is not traceable. - Macro: AC_LIBSOURCE (FILE) Specify that FILE might be needed to compile the project. If you need to know what files might be needed by a `configure.ac', you should trace `AC_LIBSOURCE'. FILE must be a literal. This macro is called automatically from `AC_LIBOBJ', but you must call it explicitly if you pass a shell variable to `AC_LIBOBJ'. In that case, since shell variables cannot be traced statically, you must pass to `AC_LIBSOURCE' any possible files that the shell variable might cause `AC_LIBOBJ' to need. For example, if you want to pass a variable `$foo_or_bar' to `AC_LIBOBJ' that holds either `"foo"' or `"bar"', you should do: AC_LIBSOURCE(foo.c) AC_LIBSOURCE(bar.c) AC_LIBOBJ($foo_or_bar) There is usually a way to avoid this, however, and you are encouraged to simply call `AC_LIBOBJ' with literal arguments. Note that this macro replaces the obsolete `AC_LIBOBJ_DECL', with slightly different semantics: the old macro took the function name, e.g., `foo', as its argument rather than the file name. - Macro: AC_LIBSOURCES (FILES) Like `AC_LIBSOURCE', but accepts one or more FILES in a comma-separated M4 list. Thus, the above example might be rewritten: AC_LIBSOURCES([foo.c, bar.c]) AC_LIBOBJ($foo_or_bar) - Macro: AC_CONFIG_LIBOBJ_DIR (DIRECTORY) Specify that `AC_LIBOBJ' replacement files are to be found in DIRECTORY, a relative path starting from the top level of the source tree. The replacement directory defaults to `.', the top level directory, and the most typical value is `lib', corresponding to `AC_CONFIG_LIBOBJ_DIR(lib)'. `configure' might need to know the replacement directory for the following reasons: (i) some checks use the replacement files, (ii) some macros bypass broken system headers by installing links to the replacement headers, etc. It is common to merely check for the existence of a function, and ask for its `AC_LIBOBJ' replacement if missing. The following macro is a convenient shorthand. - Macro: AC_REPLACE_FUNCS (FUNCTION...) Like `AC_CHECK_FUNCS', but uses `AC_LIBOBJ(FUNCTION)' as ACTION-IF-NOT-FOUND. You can declare your replacement function by enclosing the prototype in `#if !HAVE_FUNCTION'. If the system has the function, it probably declares it in a header file you should be including, so you shouldn't redeclare it lest your declaration conflict. Header Files ============ The following macros check for the presence of certain C header files. If there is no macro specifically defined to check for a header file you need, and you don't need to check for any special properties of it, then you can use one of the general header-file check macros. Portability of Headers ---------------------- This section tries to collect knowledge about common headers, and the problems they cause. By definition, this list will always require additions. Please help us keeping it as complete as possible. `inttypes.h' vs. `stdint.h' Paul Eggert notes that: ISO C 1999 says that `inttypes.h' includes `stdint.h', so there's no need to include `stdint.h' separately in a standard environment. Many implementations have `inttypes.h' but not `stdint.h' (e.g., Solaris 7), but I don't know of any implementation that has `stdint.h' but not `inttypes.h'. Nor do I know of any free software that includes `stdint.h'; `stdint.h' seems to be a creation of the committee. Particular Header Checks ------------------------ These macros check for particular system header files--whether they exist, and in some cases whether they declare certain symbols. - Macro: AC_HEADER_DIRENT Check for the following header files. For the first one that is found and defines `DIR', define the listed C preprocessor macro: `dirent.h' `HAVE_DIRENT_H' `sys/ndir.h' `HAVE_SYS_NDIR_H' `sys/dir.h' `HAVE_SYS_DIR_H' `ndir.h' `HAVE_NDIR_H' The directory-library declarations in your source code should look something like the following: #if HAVE_DIRENT_H # include # define NAMLEN(dirent) strlen((dirent)->d_name) #else # define dirent direct # define NAMLEN(dirent) (dirent)->d_namlen # if HAVE_SYS_NDIR_H # include # endif # if HAVE_SYS_DIR_H # include # endif # if HAVE_NDIR_H # include # endif #endif Using the above declarations, the program would declare variables to be of type `struct dirent', not `struct direct', and would access the length of a directory entry name by passing a pointer to a `struct dirent' to the `NAMLEN' macro. This macro also checks for the SCO Xenix `dir' and `x' libraries. - Macro: AC_HEADER_MAJOR If `sys/types.h' does not define `major', `minor', and `makedev', but `sys/mkdev.h' does, define `MAJOR_IN_MKDEV'; otherwise, if `sys/sysmacros.h' does, define `MAJOR_IN_SYSMACROS'. - Macro: AC_HEADER_STAT If the macros `S_ISDIR', `S_ISREG', etc. defined in `sys/stat.h' do not work properly (returning false positives), define `STAT_MACROS_BROKEN'. This is the case on Tektronix UTekV, Amdahl UTS and Motorola System V/88. - Macro: AC_HEADER_STDBOOL If `stdbool.h' exists and is conformant to C99, define `HAVE_STDBOOL_H' to 1; if the type `_Bool' is defined, define `HAVE__BOOL' to 1. To fulfill the C99 requirements, your `system.h' should contain the following code: #if HAVE_STDBOOL_H # include #else # if ! HAVE__BOOL # ifdef __cplusplus typedef bool _Bool; # else typedef unsigned char _Bool; # endif # endif # define bool _Bool # define false 0 # define true 1 # define __bool_true_false_are_defined 1 #endif - Macro: AC_HEADER_STDC Define `STDC_HEADERS' if the system has ANSI C header files. Specifically, this macro checks for `stdlib.h', `stdarg.h', `string.h', and `float.h'; if the system has those, it probably has the rest of the ANSI C header files. This macro also checks whether `string.h' declares `memchr' (and thus presumably the other `mem' functions), whether `stdlib.h' declare `free' (and thus presumably `malloc' and other related functions), and whether the `ctype.h' macros work on characters with the high bit set, as ANSI C requires. Use `STDC_HEADERS' instead of `__STDC__' to determine whether the system has ANSI-compliant header files (and probably C library functions) because many systems that have GCC do not have ANSI C header files. On systems without ANSI C headers, there is so much variation that it is probably easier to declare the functions you use than to figure out exactly what the system header files declare. Some systems contain a mix of functions from ANSI and BSD; some are mostly ANSI but lack `memmove'; some define the BSD functions as macros in `string.h' or `strings.h'; some have only the BSD functions but `string.h'; some declare the memory functions in `memory.h', some in `string.h'; etc. It is probably sufficient to check for one string function and one memory function; if the library has the ANSI versions of those then it probably has most of the others. If you put the following in `configure.ac': AC_HEADER_STDC AC_CHECK_FUNCS(strchr memcpy) then, in your code, you can use declarations like this: #if STDC_HEADERS # include #else # if !HAVE_STRCHR # define strchr index # define strrchr rindex # endif char *strchr (), *strrchr (); # if !HAVE_MEMCPY # define memcpy(d, s, n) bcopy ((s), (d), (n)) # define memmove(d, s, n) bcopy ((s), (d), (n)) # endif #endif If you use a function like `memchr', `memset', `strtok', or `strspn', which have no BSD equivalent, then macros won't suffice; you must provide an implementation of each function. An easy way to incorporate your implementations only when needed (since the ones in system C libraries may be hand optimized) is to, taking `memchr' for example, put it in `memchr.c' and use `AC_REPLACE_FUNCS(memchr)'. - Macro: AC_HEADER_SYS_WAIT If `sys/wait.h' exists and is compatible with POSIX, define `HAVE_SYS_WAIT_H'. Incompatibility can occur if `sys/wait.h' does not exist, or if it uses the old BSD `union wait' instead of `int' to store a status value. If `sys/wait.h' is not POSIX compatible, then instead of including it, define the POSIX macros with their usual interpretations. Here is an example: #include #if HAVE_SYS_WAIT_H # include #endif #ifndef WEXITSTATUS # define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8) #endif #ifndef WIFEXITED # define WIFEXITED(stat_val) (((stat_val) & 255) == 0) #endif `_POSIX_VERSION' is defined when `unistd.h' is included on POSIX systems. If there is no `unistd.h', it is definitely not a POSIX system. However, some non-POSIX systems do have `unistd.h'. The way to check if the system supports POSIX is: #if HAVE_UNISTD_H # include # include #endif #ifdef _POSIX_VERSION /* Code for POSIX systems. */ #endif - Macro: AC_HEADER_TIME If a program may include both `time.h' and `sys/time.h', define `TIME_WITH_SYS_TIME'. On some older systems, `sys/time.h' includes `time.h', but `time.h' is not protected against multiple inclusion, so programs should not explicitly include both files. This macro is useful in programs that use, for example, `struct timeval' as well as `struct tm'. It is best used in conjunction with `HAVE_SYS_TIME_H', which can be checked for using `AC_CHECK_HEADERS(sys/time.h)'. #if TIME_WITH_SYS_TIME # include # include #else # if HAVE_SYS_TIME_H # include # else # include # endif #endif - Macro: AC_HEADER_TIOCGWINSZ If the use of `TIOCGWINSZ' requires `', then define `GWINSZ_IN_SYS_IOCTL'. Otherwise `TIOCGWINSZ' can be found in `'. Use: #if HAVE_TERMIOS_H # include #endif #if GWINSZ_IN_SYS_IOCTL # include #endif Generic Header Checks --------------------- These macros are used to find system header files not covered by the "particular" test macros. If you need to check the contents of a header as well as find out whether it is present, you have to write your own test for it (*note Writing Tests::). - Macro: AC_CHECK_HEADER (HEADER-FILE, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `default-includes']) If the system header file HEADER-FILE is compilable, execute shell commands ACTION-IF-FOUND, otherwise execute ACTION-IF-NOT-FOUND. If you just want to define a symbol if the header file is available, consider using `AC_CHECK_HEADERS' instead. For compatibility issues with older versions of Autoconf, please read below. - Macro: AC_CHECK_HEADERS (HEADER-FILE..., [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `default-includes']) For each given system header file HEADER-FILE in the whitespace-separated argument list that exists, define `HAVE_HEADER-FILE' (in all capitals). If ACTION-IF-FOUND is given, it is additional shell code to execute when one of the header files is found. You can give it a value of `break' to break out of the loop on the first match. If ACTION-IF-NOT-FOUND is given, it is executed when one of the header files is not found. For compatibility issues with older versions of Autoconf, please read below. Previous versions of Autoconf merely checked whether the header was accepted by the preprocessor. This was changed because the old test was inappropriate for typical uses. Headers are typically used to compile, not merely to preprocess, and the old behavior sometimes accepted headers that clashed at compile-time. If you need to check whether a header is preprocessable, you can use `AC_PREPROC_IFELSE' (*note Running the Preprocessor::). This scheme, which improves the robustness of the test, also requires that you make sure that headers that must be included before the HEADER-FILE be part of the INCLUDES, (*note Default Includes::). If looking for `bar.h', which requires that `foo.h' be included before if it exists, we suggest the following scheme: AC_CHECK_HEADERS([foo.h]) AC_CHECK_HEADERS([bar.h], [], [], [#if HAVE_FOO_H # include # endif ]) Declarations ============ The following macros check for the declaration of variables and functions. If there is no macro specifically defined to check for a symbol you need, then you can use the general macros (*note Generic Declarations::) or, for more complex tests, you may use `AC_COMPILE_IFELSE' (*note Running the Compiler::). Particular Declaration Checks ----------------------------- There are no specific macros for declarations. Generic Declaration Checks -------------------------- These macros are used to find declarations not covered by the "particular" test macros. - Macro: AC_CHECK_DECL (SYMBOL, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `default-includes']) If SYMBOL (a function or a variable) is not declared in INCLUDES and a declaration is needed, run the shell commands ACTION-IF-NOT-FOUND, otherwise ACTION-IF-FOUND. If no INCLUDES are specified, the default includes are used (*note Default Includes::). This macro actually tests whether it is valid to use SYMBOL as an r-value, not if it is really declared, because it is much safer to avoid introducing extra declarations when they are not needed. - Macro: AC_CHECK_DECLS (SYMBOLS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `default-includes']) For each of the SYMBOLS (_comma_-separated list), define `HAVE_DECL_SYMBOL' (in all capitals) to `1' if SYMBOL is declared, otherwise to `0'. If ACTION-IF-NOT-FOUND is given, it is additional shell code to execute when one of the function declarations is needed, otherwise ACTION-IF-FOUND is executed. This macro uses an m4 list as first argument: AC_CHECK_DECLS(strdup) AC_CHECK_DECLS([strlen]) AC_CHECK_DECLS([malloc, realloc, calloc, free]) Unlike the other `AC_CHECK_*S' macros, when a SYMBOL is not declared, `HAVE_DECL_SYMBOL' is defined to `0' instead of leaving `HAVE_DECL_SYMBOL' undeclared. When you are _sure_ that the check was performed, use `HAVE_DECL_SYMBOL' just like any other result of Autoconf: #if !HAVE_DECL_SYMBOL extern char *symbol; #endif If the test may have not been performed, however, because it is safer _not_ to declare a symbol than to use a declaration that conflicts with the system's one, you should use: #if defined HAVE_DECL_MALLOC && !HAVE_DECL_MALLOC void *malloc (size_t *s); #endif You fall into the second category only in extreme situations: either your files may be used without being configured, or they are used during the configuration. In most cases the traditional approach is enough. Structures ========== The following macros check for the presence of certain members in C structures. If there is no macro specifically defined to check for a member you need, then you can use the general structure-member macros (*note Generic Structures::) or, for more complex tests, you may use `AC_COMPILE_IFELSE' (*note Running the Compiler::). Particular Structure Checks --------------------------- The following macros check for certain structures or structure members. - Macro: AC_STRUCT_ST_BLKSIZE If `struct stat' contains an `st_blksize' member, define `HAVE_STRUCT_STAT_ST_BLKSIZE'. The former name, `HAVE_ST_BLKSIZE' is to be avoided, as its support will cease in the future. This macro is obsoleted, and should be replaced by AC_CHECK_MEMBERS([struct stat.st_blksize]) - Macro: AC_STRUCT_ST_BLOCKS If `struct stat' contains an `st_blocks' member, define `HAVE_STRUCT STAT_ST_BLOCKS'. Otherwise, require an `AC_LIBOBJ' replacement of `fileblocks'. The former name, `HAVE_ST_BLOCKS' is to be avoided, as its support will cease in the future. - Macro: AC_STRUCT_ST_RDEV If `struct stat' contains an `st_rdev' member, define `HAVE_STRUCT_STAT_ST_RDEV'. The former name for this macro, `HAVE_ST_RDEV', is to be avoided as it will cease to be supported in the future. Actually, even the new macro is obsolete and should be replaced by: AC_CHECK_MEMBERS([struct stat.st_rdev]) - Macro: AC_STRUCT_TM If `time.h' does not define `struct tm', define `TM_IN_SYS_TIME', which means that including `sys/time.h' had better define `struct tm'. - Macro: AC_STRUCT_TIMEZONE Figure out how to get the current timezone. If `struct tm' has a `tm_zone' member, define `HAVE_STRUCT_TM_TM_ZONE' (and the obsoleted `HAVE_TM_ZONE'). Otherwise, if the external array `tzname' is found, define `HAVE_TZNAME'. Generic Structure Checks ------------------------ These macros are used to find structure members not covered by the "particular" test macros. - Macro: AC_CHECK_MEMBER (AGGREGATE.MEMBER, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `default-includes']) Check whether MEMBER is a member of the aggregate AGGREGATE. If no INCLUDES are specified, the default includes are used (*note Default Includes::). AC_CHECK_MEMBER(struct passwd.pw_gecos,, [AC_MSG_ERROR([We need `passwd.pw_gecos'!])], [#include ]) You can use this macro for sub-members: AC_CHECK_MEMBER(struct top.middle.bot) - Macro: AC_CHECK_MEMBERS (MEMBERS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `default-includes']) Check for the existence of each `AGGREGATE.MEMBER' of MEMBERS using the previous macro. When MEMBER belongs to AGGREGATE, define `HAVE_AGGREGATE_MEMBER' (in all capitals, with spaces and dots replaced by underscores). This macro uses m4 lists: AC_CHECK_MEMBERS([struct stat.st_rdev, struct stat.st_blksize]) Types ===== The following macros check for C types, either builtin or typedefs. If there is no macro specifically defined to check for a type you need, and you don't need to check for any special properties of it, then you can use a general type-check macro. Particular Type Checks ---------------------- These macros check for particular C types in `sys/types.h', `stdlib.h' and others, if they exist. - Macro: AC_TYPE_GETGROUPS Define `GETGROUPS_T' to be whichever of `gid_t' or `int' is the base type of the array argument to `getgroups'. - Macro: AC_TYPE_MBSTATE_T Define `HAVE_MBSTATE_T' if `' declares the `mbstate_t' type. Also, define `mbstate_t' to be a type if `' does not declare it. - Macro: AC_TYPE_MODE_T Equivalent to `AC_CHECK_TYPE(mode_t, int)'. - Macro: AC_TYPE_OFF_T Equivalent to `AC_CHECK_TYPE(off_t, long)'. - Macro: AC_TYPE_PID_T Equivalent to `AC_CHECK_TYPE(pid_t, int)'. - Macro: AC_TYPE_SIGNAL If `signal.h' declares `signal' as returning a pointer to a function returning `void', define `RETSIGTYPE' to be `void'; otherwise, define it to be `int'. Define signal handlers as returning type `RETSIGTYPE': RETSIGTYPE hup_handler () { ... } - Macro: AC_TYPE_SIZE_T Equivalent to `AC_CHECK_TYPE(size_t, unsigned)'. - Macro: AC_TYPE_UID_T If `uid_t' is not defined, define `uid_t' to be `int' and `gid_t' to be `int'. Generic Type Checks ------------------- These macros are used to check for types not covered by the "particular" test macros. - Macro: AC_CHECK_TYPE (TYPE, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `default-includes']) Check whether TYPE is defined. It may be a compiler builtin type or defined by the INCLUDES (*note Default Includes::). - Macro: AC_CHECK_TYPES (TYPES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES = `default-includes']) For each TYPE of the TYPES that is defined, define `HAVE_TYPE' (in all capitals). If no INCLUDES are specified, the default includes are used (*note Default Includes::). If ACTION-IF-FOUND is given, it is additional shell code to execute when one of the types is found. If ACTION-IF-NOT-FOUND is given, it is executed when one of the types is not found. This macro uses m4 lists: AC_CHECK_TYPES(ptrdiff_t) AC_CHECK_TYPES([unsigned long long, uintmax_t]) Autoconf, up to 2.13, used to provide to another version of `AC_CHECK_TYPE', broken by design. In order to keep backward compatibility, a simple heuristics, quite safe but not totally, is implemented. In case of doubt, read the documentation of the former `AC_CHECK_TYPE', see *Note Obsolete Macros::. Compilers and Preprocessors =========================== All the tests for compilers (`AC_PROG_CC', `AC_PROG_CXX', `AC_PROG_F77') define the output variable `EXEEXT' based on the output of the compiler, typically to the empty string if Unix and `.exe' if Win32 or OS/2. They also define the output variable `OBJEXT' based on the output of the compiler, after `.c' files have been excluded, typically to `o' if Unix, `obj' if Win32. If the compiler being used does not produce executables, the tests fail. If the executables can't be run, and cross-compilation is not enabled, they fail too. *Note Manual Configuration::, for more on support for cross compiling. Specific Compiler Characteristics --------------------------------- Some compilers exhibit different behaviors. Static/Dynamic Expressions Autoconf relies on a trick to extract one bit of information from the C compiler: using negative array sizes. For instance the following excerpt of a C source demonstrates how to test whether `int's are 4 bytes long: int main (void) { static int test_array [sizeof (int) == 4 ? 1 : -1]; test_array [0] = 0 return 0; } To our knowledge, there is a single compiler that does not support this trick: the HP C compilers (the real one, not only the "bundled") on HP-UX 11.00: $ cc -c -Ae +O2 +Onolimit conftest.c cc: "conftest.c": error 1879: Variable-length arrays cannot \ have static storage. Autoconf works around this problem by casting `sizeof (int)' to `long' before comparing it. Generic Compiler Characteristics -------------------------------- - Macro: AC_CHECK_SIZEOF (TYPE, [UNUSED], [INCLUDES = `default-includes']) Define `SIZEOF_TYPE' (*note Standard Symbols::) to be the size in bytes of TYPE. If `type' is unknown, it gets a size of 0. If no INCLUDES are specified, the default includes are used (*note Default Includes::). If you provide INCLUDE, be sure to include `stdio.h' which is required for this macro to run. This macro now works even when cross-compiling. The UNUSED argument was used when cross-compiling. For example, the call AC_CHECK_SIZEOF(int *) defines `SIZEOF_INT_P' to be 8 on DEC Alpha AXP systems. C Compiler Characteristics -------------------------- The following macros provide ways to find and exercise a C Compiler. There are a few constructs that ought to be avoided, but do not deserve being checked for, since they can easily be worked around. Don't use lines containing solitary backslashes They tickle a bug in the HP-UX C compiler (checked on HP-UX 10.20, 11.00, and 11i). Running the compiler on the following source, #ifdef __STDC__ /\ * A comment with backslash-newlines in it. %{ %} *\ \ / char str[] = "\\ " A string with backslash-newlines in it %{ %} \\ ""; char apostrophe = '\\ \ '\ '; #endif yields error-->cpp: "foo.c", line 13: error 4048: Non-terminating comment at end of file. error-->cpp: "foo.c", line 13: error 4033: Missing #endif at end of file. Removing the lines with solitary backslashes solves the problem. Don't compile several files at once if output matters to you Some compilers, such as the HP's, reports the name of the file it is compiling _when_ they are several. For instance: $ cc a.c b.c a.c: b.c: This can cause problems if you observe the output of the compiler to detect failures. Invoking `cc -c a.c -o a.o; cc -c b.c -o b.o; cc a.o b.o -o c' solves the issue. - Macro: AC_PROG_CC ([COMPILER-SEARCH-LIST]) Determine a C compiler to use. If `CC' is not already set in the environment, check for `gcc' and `cc', then for other C compilers. Set output variable `CC' to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a space separated list of C compilers to search for. This just gives the user an opportunity to specify an alternative search list for the C compiler. For example, if you didn't like the default order, then you could invoke `AC_PROG_CC' like this: AC_PROG_CC(cl egcs gcc cc) If the C compiler is not in ANSI C mode by default, try to add an option to output variable `CC' to make it so. This macro tries various options that select ANSI C on some system or another. It considers the compiler to be in ANSI C mode if it handles function prototypes correctly. After calling this macro you can check whether the C compiler has been set to accept ANSI C; if not, the shell variable `ac_cv_prog_cc_stdc' is set to `no'. If you wrote your source code in ANSI C, you can make an un-ANSIfied copy of it by using the program `ansi2knr', which comes with Automake. See also under `AC_C_PROTOTYPES' below. If using the GNU C compiler, set shell variable `GCC' to `yes'. If output variable `CFLAGS' was not already set, set it to `-g -O2' for the GNU C compiler (`-O2' on systems where GCC does not accept `-g'), or `-g' for other compilers. - Macro: AC_PROG_CC_C_O If the C compiler does not accept the `-c' and `-o' options simultaneously, define `NO_MINUS_C_MINUS_O'. This macro actually tests both the compiler found by `AC_PROG_CC', and, if different, the first `cc' in the path. The test fails if one fails. This macro was created for GNU Make to choose the default C compilation rule. - Macro: AC_PROG_CPP Set output variable `CPP' to a command that runs the C preprocessor. If `$CC -E' doesn't work, `/lib/cpp' is used. It is only portable to run `CPP' on files with a `.c' extension. Some preprocessors don't indicate missing include files by the error status. For such preprocessors an internal variable is set that causes other macros to check the standard error from the preprocessor and consider the test failed if any warnings have been reported. The following macros check for C compiler or machine architecture features. To check for characteristics not listed here, use `AC_COMPILE_IFELSE' (*note Running the Compiler::) or `AC_RUN_IFELSE' (*note Run Time::). - Macro: AC_C_BACKSLASH_A Define `HAVE_C_BACKSLASH_A' to 1 if the C compiler understands `\a'. - Macro: AC_C_BIGENDIAN ([ACTION-IF-TRUE], [ACTION-IF-FALSE], [ACTION-IF-UNKNOWN]) If words are stored with the most significant byte first (like Motorola and SPARC CPUs), execute ACTION-IF-TRUE. If words are stored with the least significant byte first (like Intel and VAX CPUs), execute ACTION-IF-FALSE. This macro runs a test-case if endianness cannot be determined from the system header files. When cross-compiling, the test-case is not run but grep'ed for some magic values. ACTION-IF-UNKNOWN is executed if the latter case fails to determine the byte sex of the host system. The default for ACTION-IF-TRUE is to define `WORDS_BIGENDIAN'. The default for ACTION-IF-FALSE is to do nothing. And finally, the default for ACTION-IF-UNKNOWN is to abort configure and tell the installer which variable he should preset to bypass this test. - Macro: AC_C_CONST If the C compiler does not fully support the ANSI C qualifier `const', define `const' to be empty. Some C compilers that do not define `__STDC__' do support `const'; some compilers that define `__STDC__' do not completely support `const'. Programs can simply use `const' as if every C compiler supported it; for those that don't, the `Makefile' or configuration header file will define it as empty. Occasionally installers use a C++ compiler to compile C code, typically because they lack a C compiler. This causes problems with `const', because C and C++ treat `const' differently. For example: const int foo; is valid in C but not in C++. These differences unfortunately cannot be papered over by defining `const' to be empty. If `autoconf' detects this situation, it leaves `const' alone, as this generally yields better results in practice. However, using a C++ compiler to compile C code is not recommended or supported, and installers who run into trouble in this area should get a C compiler like GCC to compile their C code. - Macro: AC_C_VOLATILE If the C compiler does not understand the keyword `volatile', define `volatile' to be empty. Programs can simply use `volatile' as if every C compiler supported it; for those that do not, the `Makefile' or configuration header will define it as empty. If the correctness of your program depends on the semantics of `volatile', simply defining it to be empty does, in a sense, break your code. However, given that the compiler does not support `volatile', you are at its mercy anyway. At least your program will compile, when it wouldn't before. In general, the `volatile' keyword is a feature of ANSI C, so you might expect that `volatile' is available only when `__STDC__' is defined. However, Ultrix 4.3's native compiler does support volatile, but does not defined `__STDC__'. - Macro: AC_C_INLINE If the C compiler supports the keyword `inline', do nothing. Otherwise define `inline' to `__inline__' or `__inline' if it accepts one of those, otherwise define `inline' to be empty. - Macro: AC_C_CHAR_UNSIGNED If the C type `char' is unsigned, define `__CHAR_UNSIGNED__', unless the C compiler predefines it. - Macro: AC_C_LONG_DOUBLE If the C compiler supports a working `long double' type with more range or precision than the `double' type, define `HAVE_LONG_DOUBLE'. - Macro: AC_C_STRINGIZE If the C preprocessor supports the stringizing operator, define `HAVE_STRINGIZE'. The stringizing operator is `#' and is found in macros such as this: #define x(y) #y - Macro: AC_C_PROTOTYPES If function prototypes are understood by the compiler (as determined by `AC_PROG_CC'), define `PROTOTYPES' and `__PROTOTYPES'. In the case the compiler does not handle prototypes, you should use `ansi2knr', which comes with the Automake distribution, to unprotoize function definitions. For function prototypes, you should first define `PARAMS': #ifndef PARAMS # if PROTOTYPES # define PARAMS(protos) protos # else /* no PROTOTYPES */ # define PARAMS(protos) () # endif /* no PROTOTYPES */ #endif then use it this way: size_t my_strlen PARAMS ((const char *)); This macro also defines `__PROTOTYPES'; this is for the benefit of header files that cannot use macros that infringe on user name space. - Macro: AC_PROG_GCC_TRADITIONAL Add `-traditional' to output variable `CC' if using the GNU C compiler and `ioctl' does not work properly without `-traditional'. That usually happens when the fixed header files have not been installed on an old system. Since recent versions of the GNU C compiler fix the header files automatically when installed, this is becoming a less prevalent problem. C++ Compiler Characteristics ---------------------------- - Macro: AC_PROG_CXX ([COMPILER-SEARCH-LIST]) Determine a C++ compiler to use. Check if the environment variable `CXX' or `CCC' (in that order) is set; if so, then set output variable `CXX' to its value. Otherwise, if the macro is invoked without an argument, then search for a C++ compiler under the likely names (first `g++' and `c++' then other names). If none of those checks succeed, then as a last resort set `CXX' to `g++'. This macro may, however, be invoked with an optional first argument which, if specified, must be a space separated list of C++ compilers to search for. This just gives the user an opportunity to specify an alternative search list for the C++ compiler. For example, if you didn't like the default order, then you could invoke `AC_PROG_CXX' like this: AC_PROG_CXX(cl KCC CC cxx cc++ xlC aCC c++ g++ egcs gcc) If using the GNU C++ compiler, set shell variable `GXX' to `yes'. If output variable `CXXFLAGS' was not already set, set it to `-g -O2' for the GNU C++ compiler (`-O2' on systems where G++ does not accept `-g'), or `-g' for other compilers. - Macro: AC_PROG_CXXCPP Set output variable `CXXCPP' to a command that runs the C++ preprocessor. If `$CXX -E' doesn't work, `/lib/cpp' is used. It is only portable to run `CXXCPP' on files with a `.c', `.C', or `.cc' extension. Some preprocessors don't indicate missing include files by the error status. For such preprocessors an internal variable is set that causes other macros to check the standard error from the preprocessor and consider the test failed if any warnings have been reported. However, it is not known whether such broken preprocessors exist for C++. Fortran 77 Compiler Characteristics ----------------------------------- - Macro: AC_PROG_F77 ([COMPILER-SEARCH-LIST]) Determine a Fortran 77 compiler to use. If `F77' is not already set in the environment, then check for `g77' and `f77', and then some other names. Set the output variable `F77' to the name of the compiler found. This macro may, however, be invoked with an optional first argument which, if specified, must be a space separated list of Fortran 77 compilers to search for. This just gives the user an opportunity to specify an alternative search list for the Fortran 77 compiler. For example, if you didn't like the default order, then you could invoke `AC_PROG_F77' like this: AC_PROG_F77(fl32 f77 fort77 xlf g77 f90 xlf90) If using `g77' (the GNU Fortran 77 compiler), then `AC_PROG_F77' will set the shell variable `G77' to `yes'. If the output variable `FFLAGS' was not already set in the environment, then set it to `-g -02' for `g77' (or `-O2' where `g77' does not accept `-g'). Otherwise, set `FFLAGS' to `-g' for all other Fortran 77 compilers. - Macro: AC_PROG_F77_C_O Test if the Fortran 77 compiler accepts the options `-c' and `-o' simultaneously, and define `F77_NO_MINUS_C_MINUS_O' if it does not. The following macros check for Fortran 77 compiler characteristics. To check for characteristics not listed here, use `AC_COMPILE_IFELSE' (*note Running the Compiler::) or `AC_RUN_IFELSE' (*note Run Time::), making sure to first set the current language to Fortran 77 `AC_LANG(Fortran 77)' (*note Language Choice::). - Macro: AC_F77_LIBRARY_LDFLAGS Determine the linker flags (e.g., `-L' and `-l') for the "Fortran 77 intrinsic and run-time libraries" that are required to successfully link a Fortran 77 program or shared library. The output variable `FLIBS' is set to these flags. This macro is intended to be used in those situations when it is necessary to mix, e.g., C++ and Fortran 77 source code into a single program or shared library (*note Mixing Fortran 77 With C and C++: (automake)Mixing Fortran 77 With C and C++.). For example, if object files from a C++ and Fortran 77 compiler must be linked together, then the C++ compiler/linker must be used for linking (since special C++-ish things need to happen at link time like calling global constructors, instantiating templates, enabling exception support, etc.). However, the Fortran 77 intrinsic and run-time libraries must be linked in as well, but the C++ compiler/linker doesn't know by default how to add these Fortran 77 libraries. Hence, the macro `AC_F77_LIBRARY_LDFLAGS' was created to determine these Fortran 77 libraries. The macro `AC_F77_DUMMY_MAIN' or `AC_F77_MAIN' will probably also be necessary to link C/C++ with Fortran; see below. - Macro: AC_F77_DUMMY_MAIN ([ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) With many compilers, the Fortran libraries detected by `AC_F77_LIBRARY_LDFLAGS' provide their own `main' entry function that initializes things like Fortran I/O, and which then calls a user-provided entry function named (say) `MAIN__' to run the user's program. The `AC_F77_DUMMY_MAIN' or `AC_F77_MAIN' macro figures out how to deal with this interaction. When using Fortran for purely numerical functions (no I/O, etc.) often one prefers to provide one's own `main' and skip the Fortran library initializations. In this case, however, one may still need to provide a dummy `MAIN__' routine in order to prevent linking errors on some systems. `AC_F77_DUMMY_MAIN' detects whether any such routine is _required_ for linking, and what its name is; the shell variable `F77_DUMMY_MAIN' holds this name, `unknown' when no solution was found, and `none' when no such dummy main is needed. By default, ACTION-IF-FOUND defines `F77_DUMMY_MAIN' to the name of this routine (e.g., `MAIN__') _if_ it is required. [ACTION-IF-NOT-FOUND] defaults to exiting with an error. In order to link with Fortran routines, the user's C/C++ program should then include the following code to define the dummy main if it is needed: #ifdef F77_DUMMY_MAIN # ifdef __cplusplus extern "C" # endif int F77_DUMMY_MAIN() { return 1; } #endif Note that `AC_F77_DUMMY_MAIN' is called automatically from `AC_F77_WRAPPERS'; there is generally no need to call it explicitly unless one wants to change the default actions. - Macro: AC_F77_MAIN As discussed above for `AC_F77_DUMMY_MAIN', many Fortran libraries allow you to provide an entry point called (say) `MAIN__' instead of the usual `main', which is then called by a `main' function in the Fortran libraries that initializes things like Fortran I/O. The `AC_F77_MAIN' macro detects whether it is _possible_ to utilize such an alternate main function, and defines `F77_MAIN' to the name of the function. (If no alternate main function name is found, `F77_MAIN' is simply defined to `main'.) Thus, when calling Fortran routines from C that perform things like I/O, one should use this macro and name the "main" function `F77_MAIN' instead of `main'. - Macro: AC_F77_WRAPPERS Defines C macros `F77_FUNC(name,NAME)' and `F77_FUNC_(name,NAME)' to properly mangle the names of C/C++ identifiers, and identifiers with underscores, respectively, so that they match the name-mangling scheme used by the Fortran 77 compiler. Fortran 77 is case-insensitive, and in order to achieve this the Fortran 77 compiler converts all identifiers into a canonical case and format. To call a Fortran 77 subroutine from C or to write a C function that is callable from Fortran 77, the C program must explicitly use identifiers in the format expected by the Fortran 77 compiler. In order to do this, one simply wraps all C identifiers in one of the macros provided by `AC_F77_WRAPPERS'. For example, suppose you have the following Fortran 77 subroutine: subroutine foobar(x,y) double precision x, y y = 3.14159 * x return end You would then declare its prototype in C or C++ as: #define FOOBAR_F77 F77_FUNC(foobar,FOOBAR) #ifdef __cplusplus extern "C" /* prevent C++ name mangling */ #endif void FOOBAR_F77(double *x, double *y); Note that we pass both the lowercase and uppercase versions of the function name to `F77_FUNC' so that it can select the right one. Note also that all parameters to Fortran 77 routines are passed as pointers (*note Mixing Fortran 77 With C and C++: (automake)Mixing Fortran 77 With C and C++.). Although Autoconf tries to be intelligent about detecting the name-mangling scheme of the Fortran 77 compiler, there may be Fortran 77 compilers that it doesn't support yet. In this case, the above code will generate a compile-time error, but some other behavior (e.g., disabling Fortran-related features) can be induced by checking whether the `F77_FUNC' macro is defined. Now, to call that routine from a C program, we would do something like: { double x = 2.7183, y; FOOBAR_F77(&x, &y); } If the Fortran 77 identifier contains an underscore (e.g., `foo_bar'), you should use `F77_FUNC_' instead of `F77_FUNC' (with the same arguments). This is because some Fortran 77 compilers mangle names differently if they contain an underscore. - Macro: AC_F77_FUNC (NAME, [SHELLVAR]) Given an identifier NAME, set the shell variable SHELLVAR to hold the mangled version NAME according to the rules of the Fortran 77 linker (see also `AC_F77_WRAPPERS'). SHELLVAR is optional; if it is not supplied, the shell variable will be simply NAME. The purpose of this macro is to give the caller a way to access the name-mangling information other than through the C preprocessor as above, for example, to call Fortran routines from some language other than C/C++. System Services =============== The following macros check for operating system services or capabilities. - Macro: AC_PATH_X Try to locate the X Window System include files and libraries. If the user gave the command line options `--x-includes=DIR' and `--x-libraries=DIR', use those directories. If either or both were not given, get the missing values by running `xmkmf' on a trivial `Imakefile' and examining the `Makefile' that it produces. If that fails (such as if `xmkmf' is not present), look for the files in several directories where they often reside. If either method is successful, set the shell variables `x_includes' and `x_libraries' to their locations, unless they are in directories the compiler searches by default. If both methods fail, or the user gave the command line option `--without-x', set the shell variable `no_x' to `yes'; otherwise set it to the empty string. - Macro: AC_PATH_XTRA An enhanced version of `AC_PATH_X'. It adds the C compiler flags that X needs to output variable `X_CFLAGS', and the X linker flags to `X_LIBS'. Define `X_DISPLAY_MISSING' if X is not available. This macro also checks for special libraries that some systems need in order to compile X programs. It adds any that the system needs to output variable `X_EXTRA_LIBS'. And it checks for special X11R6 libraries that need to be linked with before `-lX11', and adds any found to the output variable `X_PRE_LIBS'. - Macro: AC_SYS_INTERPRETER Check whether the system supports starting scripts with a line of the form `#! /bin/csh' to select the interpreter to use for the script. After running this macro, shell code in `configure.ac' can check the shell variable `interpval'; it will be set to `yes' if the system supports `#!', `no' if not. - Macro: AC_SYS_LARGEFILE Arrange for large-file support(1). On some hosts, one must use special compiler options to build programs that can access large files. Append any such options to the output variable `CC'. Define `_FILE_OFFSET_BITS' and `_LARGE_FILES' if necessary. Large-file support can be disabled by configuring with the `--disable-largefile' option. If you use this macro, check that your program works even when `off_t' is longer than `long', since this is common when large-file support is enabled. For example, it is not correct to print an arbitrary `off_t' value `X' with `printf ("%ld", (long) X)'. - Macro: AC_SYS_LONG_FILE_NAMES If the system supports file names longer than 14 characters, define `HAVE_LONG_FILE_NAMES'. - Macro: AC_SYS_POSIX_TERMIOS Check to see if the POSIX termios headers and functions are available on the system. If so, set the shell variable `ac_cv_sys_posix_termios' to `yes'. If not, set the variable to `no'. ---------- Footnotes ---------- (1) large-file support, . UNIX Variants ============= The following macros check for certain operating systems that need special treatment for some programs, due to exceptional oddities in their header files or libraries. These macros are warts; they will be replaced by a more systematic approach, based on the functions they make available or the environments they provide. - Macro: AC_AIX If on AIX, define `_ALL_SOURCE'. Allows the use of some BSD functions. Should be called before any macros that run the C compiler. - Macro: AC_GNU_SOURCE If using the GNU C library, define `_GNU_SOURCE'. Allows the use of some GNU functions. Should be called before any macros that run the C compiler. - Macro: AC_ISC_POSIX For INTERACTIVE UNIX (ISC), add `-lcposix' to output variable `LIBS' if necessary for POSIX facilities. Call this after `AC_PROG_CC' and before any other macros that use POSIX interfaces. INTERACTIVE UNIX is no longer sold, and Sun says that they will drop support for it on 2006-07-23, so this macro is becoming obsolescent. - Macro: AC_MINIX If on Minix, define `_MINIX' and `_POSIX_SOURCE' and define `_POSIX_1_SOURCE' to be 2. This allows the use of POSIX facilities. Should be called before any macros that run the C compiler. Writing Tests ************* If the existing feature tests don't do something you need, you have to write new ones. These macros are the building blocks. They provide ways for other macros to check whether various kinds of features are available and report the results. This chapter contains some suggestions and some of the reasons why the existing tests are written the way they are. You can also learn a lot about how to write Autoconf tests by looking at the existing ones. If something goes wrong in one or more of the Autoconf tests, this information can help you understand the assumptions behind them, which might help you figure out how to best solve the problem. These macros check the output of the compiler system of the current language (*note Language Choice::). They do not cache the results of their tests for future use (*note Caching Results::), because they don't know enough about the information they are checking for to generate a cache variable name. They also do not print any messages, for the same reason. The checks for particular kinds of features call these macros and do cache their results and print messages about what they're checking for. When you write a feature test that could be applicable to more than one software package, the best thing to do is encapsulate it in a new macro. *Note Writing Autoconf Macros::, for how to do that. Language Choice =============== Autoconf-generated `configure' scripts check for the C compiler and its features by default. Packages that use other programming languages (maybe more than one, e.g., C and C++) need to test features of the compilers for the respective languages. The following macros determine which programming language is used in the subsequent tests in `configure.ac'. - Macro: AC_LANG (LANGUAGE) Do compilation tests using the compiler, preprocessor, and file extensions for the specified LANGUAGE. Supported languages are: `C' Do compilation tests using `CC' and `CPP' and use extension `.c' for test programs. `C++' Do compilation tests using `CXX' and `CXXCPP' and use extension `.C' for test programs. `Fortran 77' Do compilation tests using `F77' and use extension `.f' for test programs. - Macro: AC_LANG_PUSH (LANGUAGE) Remember the current language (as set by `AC_LANG') on a stack, and then select the LANGUAGE. Use this macro and `AC_LANG_POP' in macros that need to temporarily switch to a particular language. - Macro: AC_LANG_POP ([LANGUAGE]) Select the language that is saved on the top of the stack, as set by `AC_LANG_PUSH', and remove it from the stack. If given, LANGUAGE specifies the language we just _quit_. It is a good idea to specify it when it's known (which should be the case...), since Autoconf will detect inconsistencies. AC_LANG_PUSH(Fortran 77) # Perform some tests on Fortran 77. # ... AC_LANG_POP(Fortran 77) - Macro: AC_REQUIRE_CPP Ensure that whichever preprocessor would currently be used for tests has been found. Calls `AC_REQUIRE' (*note Prerequisite Macros::) with an argument of either `AC_PROG_CPP' or `AC_PROG_CXXCPP', depending on which language is current. Writing Test Programs ===================== Autoconf tests follow is common scheme: feeding some program with some input, and most of the time, feeding a compiler with some source file. This section is dedicated to these source samples. Guidelines for Test Programs ---------------------------- The most important rule to follow when writing testing samples is: _Look for realism._ This motto means that testing samples must be written with the same strictness as real programs are written. In particular, you should avoid "shortcuts" and simplifications. Don't just play with the preprocessor if you want to prepare a compilation. For instance, using `cpp' to check if a header is functional might let your `configure' accept a header which will cause some _compiler_ error. Do not hesitate checking header with other headers included before, especially required headers. Make sure the symbols you use are properly defined, i.e., refrain for simply declaring a function yourself instead of including the proper header. Test programs should not write anything to the standard output. They should return 0 if the test succeeds, nonzero otherwise, so that success can be distinguished easily from a core dump or other failure; segmentation violations and other failures produce a nonzero exit status. Test programs should `exit', not `return', from `main', because on some systems (old Suns, at least) the argument to `return' in `main' is ignored. Test programs can use `#if' or `#ifdef' to check the values of preprocessor macros defined by tests that have already run. For example, if you call `AC_HEADER_STDC', then later on in `configure.ac' you can have a test program that includes an ANSI C header file conditionally: #if STDC_HEADERS # include #endif If a test program needs to use or create a data file, give it a name that starts with `conftest', such as `conftest.data'. The `configure' script cleans up by running `rm -rf conftest*' after running test programs and if the script is interrupted. Test Functions -------------- Function declarations in test programs should have a prototype conditionalized for C++. In practice, though, test programs rarely need functions that take arguments. #ifdef __cplusplus foo (int i) #else foo (i) int i; #endif Functions that test programs declare should also be conditionalized for C++, which requires `extern "C"' prototypes. Make sure to not include any header files containing clashing prototypes. #ifdef __cplusplus extern "C" void *malloc (size_t); #else void *malloc (); #endif If a test program calls a function with invalid parameters (just to see whether it exists), organize the program to ensure that it never invokes that function. You can do this by calling it in another function that is never invoked. You can't do it by putting it after a call to `exit', because GCC version 2 knows that `exit' never returns and optimizes out any code that follows it in the same block. If you include any header files, be sure to call the functions relevant to them with the correct number of arguments, even if they are just 0, to avoid compilation errors due to prototypes. GCC version 2 has internal prototypes for several functions that it automatically inlines; for example, `memcpy'. To avoid errors when checking for them, either pass them the correct number of arguments or redeclare them with a different return type (such as `char'). Generating Sources ------------------ Autoconf provides a set of macros that can be used to generate test source files. They are written to be language generic, i.e., they actually depend on the current language (*note Language Choice::) to "format" the output properly. - Macro: AC_LANG_CONFTEST (SOURCE) Save the SOURCE text in the current test source file: `conftest.EXTENSION' where the EXTENSION depends on the current language. Note that the SOURCE is evaluated exactly once, like regular Autoconf macro arguments, and therefore (i) you may pass a macro invocation, (ii) if not, be sure to double quote if needed. - Macro: AC_LANG_SOURCE (SOURCE) Expands into the SOURCE, with proper definition of the current location (e.g., `#line 1234 "configure"' in C), and definition of all the `AC_DEFINE' performed so far. For instance executing (observe the double quotation!): AC_INIT(Autoconf Documentation, 2.57, bug-autoconf@gnu.org) AC_DEFINE([HELLO_WORLD], ["Hello, World\n"]) AC_LANG_CONFTEST( [AC_LANG_SOURCE([[const char hw[] = "Hello, World\n";]])]) gcc -E -dD conftest.c -o - results in: # 1 "conftest.c" # 1169 "configure" # 1 "confdefs.h" 1 #define PACKAGE_NAME "Autoconf Documentation" #define PACKAGE_TARNAME "autoconf-documentation" #define PACKAGE_VERSION "2.57" #define PACKAGE_STRING "Autoconf Documentation 2.57" #define PACKAGE_BUGREPORT "bug-autoconf@gnu.org" #define HELLO_WORLD "Hello, World\n" # 1170 "configure" 2 const char hw[] = "Hello, World\n"; - Macro: AC_LANG_PROGRAM (PROLOGUE, BODY) Expands into a source file which consists of the PROLOGUE, and then BODY as body of the main function (e.g., `main' in C). Since it uses `AC_LANG_SOURCE', the feature of the latter are available. For instance: AC_INIT(Autoconf Documentation, 2.57, bug-autoconf@gnu.org) AC_DEFINE([HELLO_WORLD], ["Hello, World\n"]) AC_LANG_CONFTEST( [AC_LANG_PROGRAM([[const char hw[] = "Hello, World\n";]], [[fputs (hw, stdout);]])]) gcc -E -dD conftest.c -o - results in: # 1 "conftest.c" # 1169 "configure" # 1 "confdefs.h" 1 #define PACKAGE_NAME "Autoconf Documentation" #define PACKAGE_TARNAME "autoconf-documentation" #define PACKAGE_VERSION "2.57" #define PACKAGE_STRING "Autoconf Documentation 2.57" #define PACKAGE_BUGREPORT "bug-autoconf@gnu.org" #define HELLO_WORLD "Hello, World\n" # 1170 "configure" 2 const char hw[] = "Hello, World\n"; int main () { fputs (hw, stdout); ; return 0; } - Macro: AC_LANG_CALL (PROLOGUE, FUNCTION) Expands into a source file which consists of the PROLOGUE, and then a call to the FUNCTION as body of the main function (e.g., `main' in C). Since it uses `AC_LANG_PROGRAMS', the feature of the latter are available. This function will probably be replaced in the feature by a version which would enable specifying the arguments. The use of this macro is not encouraged, as it violates strongly the typing system. - Macro: AC_LANG_FUNC_LINK_TRY (FUNCTION) Expands into a source file which consists of a pseudo use of the FUNCTION as body of the main function (e.g., `main' in C): a simple (function pointer) assignment. Since it uses `AC_LANG_PROGRAMS', the feature of the latter are available. As `AC_LANG_CALL', this macro is documented only for completeness. It is considered to be severely broken, and in the future will be removed in favor of actual function calls (with properly typed arguments). Running the Preprocessor ======================== Sometimes one might need to run the preprocessor on some source file. _Usually it is a bad idea_, as you typically need to _compile_ your project, not merely run the preprocessor on it; therefore you certainly want to run the compiler, not the preprocessor. Resist to the temptation of following the easiest path. Nevertheless, if you need to run the preprocessor, then use `AC_PREPROC_IFELSE'. - Macro: AC_PREPROC_IFELSE (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE]) Run the preprocessor of the current language (*note Language Choice::) on the INPUT, run the shell commands ACTION-IF-TRUE on success, ACTION-IF-FALSE otherwise. The INPUT can be made by `AC_LANG_PROGRAM' and friends. This macro uses `CPPFLAGS', but not `CFLAGS', because `-g', `-O', etc. are not valid options to many C preprocessors. It is customary to report unexpected failures with `AC_MSG_FAILURE'. For instance: AC_INIT(Autoconf Documentation, 2.57, bug-autoconf@gnu.org) AC_DEFINE([HELLO_WORLD], ["Hello, World\n"]) AC_PREPROC_IFELSE( [AC_LANG_PROGRAM([[const char hw[] = "Hello, World\n";]], [[fputs (hw, stdout);]])], [AC_MSG_RESULT([OK])], [AC_MSG_FAILURE([unexpected preprocessor failure])]) results in: checking for gcc... gcc checking for C compiler default output... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking how to run the C preprocessor... gcc -E OK The macro `AC_TRY_CPP' (*note Obsolete Macros::) used to play the role of `AC_PREPROC_IFELSE', but double quotes its argument, making it impossible to use it to ellaborate sources. You are encouraged to get rid of your old use of the macro `AC_TRY_CPP' in favor of `AC_PREPROC_IFELSE', but, in the first place, are you sure you need to run the _preprocessor_ and not the compiler? - Macro: AC_EGREP_HEADER (PATTERN, HEADER-FILE, ACTION-IF-FOUND, [ACTION-IF-NOT-FOUND]) If the output of running the preprocessor on the system header file HEADER-FILE matches the extended regular expression PATTERN, execute shell commands ACTION-IF-FOUND, otherwise execute ACTION-IF-NOT-FOUND. - Macro: AC_EGREP_CPP (PATTERN, PROGRAM, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) PROGRAM is the text of a C or C++ program, on which shell variable, back quote, and backslash substitutions are performed. If the output of running the preprocessor on PROGRAM matches the extended regular expression PATTERN, execute shell commands ACTION-IF-FOUND, otherwise execute ACTION-IF-NOT-FOUND. Running the Compiler ==================== To check for a syntax feature of the (C, C++, or Fortran 77) compiler, such as whether it recognizes a certain keyword, or simply to try some library feature, use `AC_COMPILE_IFELSE' to try to compile a small program that uses that feature. - Macro: AC_COMPILE_IFELSE (INPUT, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) Run the compiler of the current language (*note Language Choice::) on the INPUT, run the shell commands ACTION-IF-TRUE on success, ACTION-IF-FALSE otherwise. The INPUT can be made by `AC_LANG_PROGRAM' and friends. This macro uses `CFLAGS' or `CXXFLAGS' if either C or C++ is the currently selected language, as well as `CPPFLAGS', when compiling. If Fortran 77 is the currently selected language then `FFLAGS' will be used when compiling. It is customary to report unexpected failures with `AC_MSG_FAILURE'. This macro does not try to link; use `AC_LINK_IFELSE' if you need to do that (*note Running the Linker::). Running the Linker ================== To check for a library, a function, or a global variable, Autoconf `configure' scripts try to compile and link a small program that uses it. This is unlike Metaconfig, which by default uses `nm' or `ar' on the C library to try to figure out which functions are available. Trying to link with the function is usually a more reliable approach because it avoids dealing with the variations in the options and output formats of `nm' and `ar' and in the location of the standard libraries. It also allows configuring for cross-compilation or checking a function's run-time behavior if needed. On the other hand, it can be slower than scanning the libraries once, but accuracy is more important than speed. `AC_LINK_IFELSE' is used to compile test programs to test for functions and global variables. It is also used by `AC_CHECK_LIB' to check for libraries (*note Libraries::), by adding the library being checked for to `LIBS' temporarily and trying to link a small program. - Macro: AC_LINK_IFELSE (INPUT, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) Run the compiler and the linker of the current language (*note Language Choice::) on the INPUT, run the shell commands ACTION-IF-TRUE on success, ACTION-IF-FALSE otherwise. The INPUT can be made by `AC_LANG_PROGRAM' and friends. This macro uses `CFLAGS' or `CXXFLAGS' if either C or C++ is the currently selected language, as well as `CPPFLAGS', when compiling. If Fortran 77 is the currently selected language then `FFLAGS' will be used when compiling. It is customary to report unexpected failures with `AC_MSG_FAILURE'. This macro does not try to execute the program; use `AC_RUN_IFELSE' if you need to do that (*note Run Time::). Checking Run Time Behavior ========================== Sometimes you need to find out how a system performs at run time, such as whether a given function has a certain capability or bug. If you can, make such checks when your program runs instead of when it is configured. You can check for things like the machine's endianness when your program initializes itself. If you really need to test for a run-time behavior while configuring, you can write a test program to determine the result, and compile and run it using `AC_RUN_IFELSE'. Avoid running test programs if possible, because this prevents people from configuring your package for cross-compiling. - Macro: AC_RUN_IFELSE (INPUT, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [ACTION-IF-CROSS-COMPILING]) If PROGRAM compiles and links successfully and returns an exit status of 0 when executed, run shell commands ACTION-IF-TRUE. Otherwise, run shell commands ACTION-IF-FALSE. The INPUT can be made by `AC_LANG_PROGRAM' and friends. This macro uses `CFLAGS' or `CXXFLAGS', `CPPFLAGS', `LDFLAGS', and `LIBS' If the compiler being used does not produce executables that run on the system where `configure' is being run, then the test program is not run. If the optional shell commands ACTION-IF-CROSS-COMPILING are given, they are run instead. Otherwise, `configure' prints an error message and exits. In the ACTION-IF-FALSE section, the exit status of the program is available in the shell variable `$?', but be very careful to limit yourself to positive values smaller than 127; bigger values should be saved into a file by the PROGRAM. Note also that you have simply no guarantee that this exit status is issued by the PROGRAM, or by the failure of its compilation. In other words, use this feature if sadist only, it was reestablished because the Autoconf maintainers grew tired of receiving "bug reports". It is customary to report unexpected failures with `AC_MSG_FAILURE'. Try to provide a pessimistic default value to use when cross-compiling makes run-time tests impossible. You do this by passing the optional last argument to `AC_RUN_IFELSE'. `autoconf' prints a warning message when creating `configure' each time it encounters a call to `AC_RUN_IFELSE' with no ACTION-IF-CROSS-COMPILING argument given. You may ignore the warning, though users will not be able to configure your package for cross-compiling. A few of the macros distributed with Autoconf produce this warning message. To configure for cross-compiling you can also choose a value for those parameters based on the canonical system name (*note Manual Configuration::). Alternatively, set up a test results cache file with the correct values for the host system (*note Caching Results::). To provide a default for calls of `AC_RUN_IFELSE' that are embedded in other macros, including a few of the ones that come with Autoconf, you can test whether the shell variable `cross_compiling' is set to `yes', and then use an alternate method to get the results instead of calling the macros. Systemology =========== This section aims at presenting some systems and pointers to documentation. It may help you addressing particular problems reported by users. The Rosetta Stone for Unix(1) contains a lot of interesting crossed information on various Unices. Darwin Darwin is also known as Mac OS X. Beware that the file system _can_ be case-preserving, but case insensitive. This can cause nasty problems, since for instance the installation attempt for a package having an `INSTALL' file can result in `make install' report that nothing was to be done! That's all dependent on whether the file system is a UFS (case sensitive) or HFS+ (case preserving). By default Apple wants you to install the OS on HFS+. Unfortunately, there are some pieces of software which really need to be built on UFS. We may want to rebuild Darwin to have both UFS and HFS+ available (and put the /local/build tree on the UFS). QNX 4.25 QNX is a realtime operating system running on Intel architecture meant to be scalable from the small embedded systems to the hundred processor super-computer. It claims to be POSIX certified. More information is available on the QNX home page(2), including the QNX man pages(3). Tru64 The documentation of several versions of Tru64(4) is available in different formats. Unix version 7 Documentation is available in the V7 Manual(5). ---------- Footnotes ---------- (1) Rosetta Stone for Unix, . (2) QNX home page, . (3) QNX man pages, . (4) documentation of several versions of Tru64, . (5) V7 Manual, . Multiple Cases ============== Some operations are accomplished in several possible ways, depending on the UNIX variant. Checking for them essentially requires a "case statement". Autoconf does not directly provide one; however, it is easy to simulate by using a shell variable to keep track of whether a way to perform the operation has been found yet. Here is an example that uses the shell variable `fstype' to keep track of whether the remaining cases need to be checked. AC_MSG_CHECKING([how to get file system type]) fstype=no # The order of these tests is important. AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]])], [AC_DEFINE(FSTYPE_STATVFS) fstype=SVR4]) if test $fstype = no; then AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]])], [AC_DEFINE(FSTYPE_USG_STATFS) fstype=SVR3]) fi if test $fstype = no; then AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[#include #include ]])]), [AC_DEFINE(FSTYPE_AIX_STATFS) fstype=AIX]) fi # (more cases omitted here) AC_MSG_RESULT([$fstype]) Results of Tests **************** Once `configure' has determined whether a feature exists, what can it do to record that information? There are four sorts of things it can do: define a C preprocessor symbol, set a variable in the output files, save the result in a cache file for future `configure' runs, and print a message letting the user know the result of the test. Defining C Preprocessor Symbols =============================== A common action to take in response to a feature test is to define a C preprocessor symbol indicating the results of the test. That is done by calling `AC_DEFINE' or `AC_DEFINE_UNQUOTED'. By default, `AC_OUTPUT' places the symbols defined by these macros into the output variable `DEFS', which contains an option `-DSYMBOL=VALUE' for each symbol defined. Unlike in Autoconf version 1, there is no variable `DEFS' defined while `configure' is running. To check whether Autoconf macros have already defined a certain C preprocessor symbol, test the value of the appropriate cache variable, as in this example: AC_CHECK_FUNC(vprintf, [AC_DEFINE(HAVE_VPRINTF)]) if test "$ac_cv_func_vprintf" != yes; then AC_CHECK_FUNC(_doprnt, [AC_DEFINE(HAVE_DOPRNT)]) fi If `AC_CONFIG_HEADERS' has been called, then instead of creating `DEFS', `AC_OUTPUT' creates a header file by substituting the correct values into `#define' statements in a template file. *Note Configuration Headers::, for more information about this kind of output. - Macro: AC_DEFINE (VARIABLE, VALUE, [DESCRIPTION]) - Macro: AC_DEFINE (VARIABLE) Define the C preprocessor variable VARIABLE to VALUE (verbatim). VALUE should not contain literal newlines, and if you are not using `AC_CONFIG_HEADERS' it should not contain any `#' characters, as `make' tends to eat them. To use a shell variable (which you need to do in order to define a value containing the M4 quote characters `[' or `]'), use `AC_DEFINE_UNQUOTED' instead. DESCRIPTION is only useful if you are using `AC_CONFIG_HEADERS'. In this case, DESCRIPTION is put into the generated `config.h.in' as the comment before the macro define. The following example defines the C preprocessor variable `EQUATION' to be the string constant `"$a > $b"': AC_DEFINE(EQUATION, "$a > $b") If neither VALUE nor DESCRIPTION are given, then VALUE defaults to 1 instead of to the empty string. This is for backwards compatibility with older versions of Autoconf, but this usage is obsolescent and may be withdrawn in future versions of Autoconf. - Macro: AC_DEFINE_UNQUOTED (VARIABLE, VALUE, [DESCRIPTION]) - Macro: AC_DEFINE_UNQUOTED (VARIABLE) Like `AC_DEFINE', but three shell expansions are performed--once--on VARIABLE and VALUE: variable expansion (`$'), command substitution (``'), and backslash escaping (`\'). Single and double quote characters in the value have no special meaning. Use this macro instead of `AC_DEFINE' when VARIABLE or VALUE is a shell variable. Examples: AC_DEFINE_UNQUOTED(config_machfile, "$machfile") AC_DEFINE_UNQUOTED(GETGROUPS_T, $ac_cv_type_getgroups) AC_DEFINE_UNQUOTED($ac_tr_hdr) Due to a syntactical bizarreness of the Bourne shell, do not use semicolons to separate `AC_DEFINE' or `AC_DEFINE_UNQUOTED' calls from other macro calls or shell code; that can cause syntax errors in the resulting `configure' script. Use either spaces or newlines. That is, do this: AC_CHECK_HEADER(elf.h, [AC_DEFINE(SVR4) LIBS="$LIBS -lelf"]) or this: AC_CHECK_HEADER(elf.h, [AC_DEFINE(SVR4) LIBS="$LIBS -lelf"]) instead of this: AC_CHECK_HEADER(elf.h, [AC_DEFINE(SVR4); LIBS="$LIBS -lelf"]) Setting Output Variables ======================== Another way to record the results of tests is to set "output variables", which are shell variables whose values are substituted into files that `configure' outputs. The two macros below create new output variables. *Note Preset Output Variables::, for a list of output variables that are always available. - Macro: AC_SUBST (VARIABLE, [VALUE]) Create an output variable from a shell variable. Make `AC_OUTPUT' substitute the variable VARIABLE into output files (typically one or more `Makefile's). This means that `AC_OUTPUT' will replace instances of `@VARIABLE@' in input files with the value that the shell variable VARIABLE has when `AC_OUTPUT' is called. This value of VARIABLE should not contain literal newlines. If VALUE is given, in addition assign it to VARIABLE. - Macro: AC_SUBST_FILE (VARIABLE) Another way to create an output variable from a shell variable. Make `AC_OUTPUT' insert (without substitutions) the contents of the file named by shell variable VARIABLE into output files. This means that `AC_OUTPUT' will replace instances of `@VARIABLE@' in output files (such as `Makefile.in') with the contents of the file that the shell variable VARIABLE names when `AC_OUTPUT' is called. Set the variable to `/dev/null' for cases that do not have a file to insert. This macro is useful for inserting `Makefile' fragments containing special dependencies or other `make' directives for particular host or target types into `Makefile's. For example, `configure.ac' could contain: AC_SUBST_FILE(host_frag) host_frag=$srcdir/conf/sun4.mh and then a `Makefile.in' could contain: @host_frag@ Running `configure' in varying environments can be extremely dangerous. If for instance the user runs `CC=bizarre-cc ./configure', then the cache, `config.h', and many other output files will depend upon `bizarre-cc' being the C compiler. If for some reason the user runs `./configure' again, or if it is run via `./config.status --recheck', (*Note Automatic Remaking::, and *note config.status Invocation::), then the configuration can be inconsistent, composed of results depending upon two different compilers. Environment variables that affect this situation, such as `CC' above, are called "precious variables", and can be declared as such by `AC_ARG_VAR'. - Macro: AC_ARG_VAR (VARIABLE, DESCRIPTION) Declare VARIABLE is a precious variable, and include its DESCRIPTION in the variable section of `./configure --help'. Being precious means that - VARIABLE is `AC_SUBST''d. - The value of VARIABLE when `configure' was launched is saved in the cache, including if it was not specified on the command line but via the environment. Indeed, while `configure' can notice the definition of `CC' in `./configure CC=bizarre-cc', it is impossible to notice it in `CC=bizarre-cc ./configure', which, unfortunately, is what most users do. We emphasize that it is the _initial_ value of VARIABLE which is saved, not that found during the execution of `configure'. Indeed, specifying `./configure FOO=foo' and letting `./configure' guess that `FOO' is `foo' can be two very different runs. - VARIABLE is checked for consistency between two `configure' runs. For instance: $ ./configure --silent --config-cache $ CC=cc ./configure --silent --config-cache configure: error: `CC' was not set in the previous run configure: error: changes in the environment can compromise \ the build configure: error: run `make distclean' and/or \ `rm config.cache' and start over and similarly if the variable is unset, or if its content is changed. - VARIABLE is kept during automatic reconfiguration (*note config.status Invocation::) as if it had been passed as a command line argument, including when no cache is used: $ CC=/usr/bin/cc ./configure undeclared_var=raboof --silent $ ./config.status --recheck running /bin/sh ./configure undeclared_var=raboof --silent \ CC=/usr/bin/cc --no-create --no-recursion Caching Results =============== To avoid checking for the same features repeatedly in various `configure' scripts (or in repeated runs of one script), `configure' can optionally save the results of many checks in a "cache file" (*note Cache Files::). If a `configure' script runs with caching enabled and finds a cache file, it reads the results of previous runs from the cache and avoids rerunning those checks. As a result, `configure' can then run much faster than if it had to perform all of the checks every time. - Macro: AC_CACHE_VAL (CACHE-ID, COMMANDS-TO-SET-IT) Ensure that the results of the check identified by CACHE-ID are available. If the results of the check were in the cache file that was read, and `configure' was not given the `--quiet' or `--silent' option, print a message saying that the result was cached; otherwise, run the shell commands COMMANDS-TO-SET-IT. If the shell commands are run to determine the value, the value will be saved in the cache file just before `configure' creates its output files. *Note Cache Variable Names::, for how to choose the name of the CACHE-ID variable. The COMMANDS-TO-SET-IT _must have no side effects_ except for setting the variable CACHE-ID, see below. - Macro: AC_CACHE_CHECK (MESSAGE, CACHE-ID, COMMANDS-TO-SET-IT) A wrapper for `AC_CACHE_VAL' that takes care of printing the messages. This macro provides a convenient shorthand for the most common way to use these macros. It calls `AC_MSG_CHECKING' for MESSAGE, then `AC_CACHE_VAL' with the CACHE-ID and COMMANDS arguments, and `AC_MSG_RESULT' with CACHE-ID. The COMMANDS-TO-SET-IT _must have no side effects_ except for setting the variable CACHE-ID, see below. It is very common to find buggy macros using `AC_CACHE_VAL' or `AC_CACHE_CHECK', because people are tempted to call `AC_DEFINE' in the COMMANDS-TO-SET-IT. Instead, the code that _follows_ the call to `AC_CACHE_VAL' should call `AC_DEFINE', by examining the value of the cache variable. For instance, the following macro is broken: AC_DEFUN([AC_SHELL_TRUE], [AC_CACHE_CHECK([whether true(1) works], [ac_cv_shell_true_works], [ac_cv_shell_true_works=no true && ac_cv_shell_true_works=yes if test $ac_cv_shell_true_works = yes; then AC_DEFINE([TRUE_WORKS], 1 [Define if `true(1)' works properly.]) fi]) ]) This fails if the cache is enabled: the second time this macro is run, `TRUE_WORKS' _will not be defined_. The proper implementation is: AC_DEFUN([AC_SHELL_TRUE], [AC_CACHE_CHECK([whether true(1) works], [ac_cv_shell_true_works], [ac_cv_shell_true_works=no true && ac_cv_shell_true_works=yes]) if test $ac_cv_shell_true_works = yes; then AC_DEFINE([TRUE_WORKS], 1 [Define if `true(1)' works properly.]) fi ]) Also, COMMANDS-TO-SET-IT should not print any messages, for example with `AC_MSG_CHECKING'; do that before calling `AC_CACHE_VAL', so the messages are printed regardless of whether the results of the check are retrieved from the cache or determined by running the shell commands. Cache Variable Names -------------------- The names of cache variables should have the following format: PACKAGE-PREFIX_cv_VALUE-TYPE_SPECIFIC-VALUE_[ADDITIONAL-OPTIONS] for example, `ac_cv_header_stat_broken' or `ac_cv_prog_gcc_traditional'. The parts of the variable name are: PACKAGE-PREFIX An abbreviation for your package or organization; the same prefix you begin local Autoconf macros with, except lowercase by convention. For cache values used by the distributed Autoconf macros, this value is `ac'. `_cv_' Indicates that this shell variable is a cache value. This string _must_ be present in the variable name, including the leading underscore. VALUE-TYPE A convention for classifying cache values, to produce a rational naming system. The values used in Autoconf are listed in *Note Macro Names::. SPECIFIC-VALUE Which member of the class of cache values this test applies to. For example, which function (`alloca'), program (`gcc'), or output variable (`INSTALL'). ADDITIONAL-OPTIONS Any particular behavior of the specific member that this test applies to. For example, `broken' or `set'. This part of the name may be omitted if it does not apply. The values assigned to cache variables may not contain newlines. Usually, their values will be Boolean (`yes' or `no') or the names of files or functions; so this is not an important restriction. Cache Files ----------- A cache file is a shell script that caches the results of configure tests run on one system so they can be shared between configure scripts and configure runs. It is not useful on other systems. If its contents are invalid for some reason, the user may delete or edit it. By default, `configure' uses no cache file (technically, it uses `--cache-file=/dev/null'), to avoid problems caused by accidental use of stale cache files. To enable caching, `configure' accepts `--config-cache' (or `-C') to cache results in the file `config.cache'. Alternatively, `--cache-file=FILE' specifies that FILE be the cache file. The cache file is created if it does not exist already. When `configure' calls `configure' scripts in subdirectories, it uses the `--cache-file' argument so that they share the same cache. *Note Subdirectories::, for information on configuring subdirectories with the `AC_CONFIG_SUBDIRS' macro. `config.status' only pays attention to the cache file if it is given the `--recheck' option, which makes it rerun `configure'. It is wrong to try to distribute cache files for particular system types. There is too much room for error in doing that, and too much administrative overhead in maintaining them. For any features that can't be guessed automatically, use the standard method of the canonical system type and linking files (*note Manual Configuration::). The site initialization script can specify a site-wide cache file to use, instead of the usual per-program cache. In this case, the cache file will gradually accumulate information whenever someone runs a new `configure' script. (Running `configure' merges the new cache results with the existing cache file.) This may cause problems, however, if the system configuration (e.g., the installed libraries or compilers) changes and the stale cache file is not deleted. Cache Checkpointing ------------------- If your configure script, or a macro called from `configure.ac', happens to abort the configure process, it may be useful to checkpoint the cache a few times at key points using `AC_CACHE_SAVE'. Doing so will reduce the amount of time it takes to re-run the configure script with (hopefully) the error that caused the previous abort corrected. - Macro: AC_CACHE_LOAD Loads values from existing cache file, or creates a new cache file if a cache file is not found. Called automatically from `AC_INIT'. - Macro: AC_CACHE_SAVE Flushes all cached values to the cache file. Called automatically from `AC_OUTPUT', but it can be quite useful to call `AC_CACHE_SAVE' at key points in `configure.ac'. For instance: ... AC_INIT, etc. ... # Checks for programs. AC_PROG_CC AC_PROG_GCC_TRADITIONAL ... more program checks ... AC_CACHE_SAVE # Checks for libraries. AC_CHECK_LIB(nsl, gethostbyname) AC_CHECK_LIB(socket, connect) ... more lib checks ... AC_CACHE_SAVE # Might abort... AM_PATH_GTK(1.0.2,, [AC_MSG_ERROR([GTK not in path])]) AM_PATH_GTKMM(0.9.5,, [AC_MSG_ERROR([GTK not in path])]) ... AC_OUTPUT, etc. ... Printing Messages ================= `configure' scripts need to give users running them several kinds of information. The following macros print messages in ways appropriate for each kind. The arguments to all of them get enclosed in shell double quotes, so the shell performs variable and back-quote substitution on them. These macros are all wrappers around the `echo' shell command. `configure' scripts should rarely need to run `echo' directly to print messages for the user. Using these macros makes it easy to change how and when each kind of message is printed; such changes need only be made to the macro definitions and all of the callers will change automatically. To diagnose static issues, i.e., when `autoconf' is run, see *Note Reporting Messages::. - Macro: AC_MSG_CHECKING (FEATURE-DESCRIPTION) Notify the user that `configure' is checking for a particular feature. This macro prints a message that starts with `checking ' and ends with `...' and no newline. It must be followed by a call to `AC_MSG_RESULT' to print the result of the check and the newline. The FEATURE-DESCRIPTION should be something like `whether the Fortran compiler accepts C++ comments' or `for c89'. This macro prints nothing if `configure' is run with the `--quiet' or `--silent' option. - Macro: AC_MSG_RESULT (RESULT-DESCRIPTION) Notify the user of the results of a check. RESULT-DESCRIPTION is almost always the value of the cache variable for the check, typically `yes', `no', or a file name. This macro should follow a call to `AC_MSG_CHECKING', and the RESULT-DESCRIPTION should be the completion of the message printed by the call to `AC_MSG_CHECKING'. This macro prints nothing if `configure' is run with the `--quiet' or `--silent' option. - Macro: AC_MSG_NOTICE (MESSAGE) Deliver the MESSAGE to the user. It is useful mainly to print a general description of the overall purpose of a group of feature checks, e.g., AC_MSG_NOTICE([checking if stack overflow is detectable]) This macro prints nothing if `configure' is run with the `--quiet' or `--silent' option. - Macro: AC_MSG_ERROR (ERROR-DESCRIPTION, [EXIT-STATUS]) Notify the user of an error that prevents `configure' from completing. This macro prints an error message to the standard error output and exits `configure' with EXIT-STATUS (1 by default). ERROR-DESCRIPTION should be something like `invalid value $HOME for \$HOME'. The ERROR-DESCRIPTION should start with a lower-case letter, and "cannot" is preferred to "can't". - Macro: AC_MSG_FAILURE (ERROR-DESCRIPTION, [EXIT-STATUS]) This `AC_MSG_ERROR' wrapper notifies the user of an error that prevents `configure' from completing _and_ that additional details are provided in `config.log'. This is typically used when abnormal results are found during a compilation. - Macro: AC_MSG_WARN (PROBLEM-DESCRIPTION) Notify the `configure' user of a possible problem. This macro prints the message to the standard error output; `configure' continues running afterward, so macros that call `AC_MSG_WARN' should provide a default (back-up) behavior for the situations they warn about. PROBLEM-DESCRIPTION should be something like `ln -s seems to make hard links'. Programming in M4 ***************** Autoconf is written on top of two layers: "M4sugar", which provides convenient macros for pure M4 programming, and "M4sh", which provides macros dedicated to shell script generation. As of this version of Autoconf, these two layers are still experimental, and their interface might change in the future. As a matter of fact, _anything that is not documented must not be used_. M4 Quotation ============ The most common problem with existing macros is an improper quotation. This section, which users of Autoconf can skip, but which macro writers _must_ read, first justifies the quotation scheme that was chosen for Autoconf and then ends with a rule of thumb. Understanding the former helps one to follow the latter. Active Characters ----------------- To fully understand where proper quotation is important, you first need to know what the special characters are in Autoconf: `#' introduces a comment inside which no macro expansion is performed, `,' separates arguments, `[' and `]' are the quotes themselves, and finally `(' and `)' (which M4 tries to match by pairs). In order to understand the delicate case of macro calls, we first have to present some obvious failures. Below they are "obvious-ified", but when you find them in real life, they are usually in disguise. Comments, introduced by a hash and running up to the newline, are opaque tokens to the top level: active characters are turned off, and there is no macro expansion: # define([def], ine) =># define([def], ine) Each time there can be a macro expansion, there is a quotation expansion, i.e., one level of quotes is stripped: int tab[10]; =>int tab10; [int tab[10];] =>int tab[10]; Without this in mind, the reader will try hopelessly to use her macro `array': define([array], [int tab[10];]) array =>int tab10; [array] =>array How can you correctly output the intended results(1)? ---------- Footnotes ---------- (1) Using `defn'. One Macro Call -------------- Let's proceed on the interaction between active characters and macros with this small macro, which just returns its first argument: define([car], [$1]) The two pairs of quotes above are not part of the arguments of `define'; rather, they are understood by the top level when it tries to find the arguments of `define'. Therefore, it is equivalent to write: define(car, $1) But, while it is acceptable for a `configure.ac' to avoid unnecessary quotes, it is bad practice for Autoconf macros which must both be more robust and also advocate perfect style. At the top level, there are only two possibilities: either you quote or you don't: car(foo, bar, baz) =>foo [car(foo, bar, baz)] =>car(foo, bar, baz) Let's pay attention to the special characters: car(#) error-->EOF in argument list The closing parenthesis is hidden in the comment; with a hypothetical quoting, the top level understood it this way: car([#)] Proper quotation, of course, fixes the problem: car([#]) =># The reader will easily understand the following examples: car(foo, bar) =>foo car([foo, bar]) =>foo, bar car((foo, bar)) =>(foo, bar) car([(foo], [bar)]) =>(foo car([], []) => car([[]], [[]]) =>[] With this in mind, we can explore the cases where macros invoke macros.... Quotation and Nested Macros --------------------------- The examples below use the following macros: define([car], [$1]) define([active], [ACT, IVE]) define([array], [int tab[10]]) Each additional embedded macro call introduces other possible interesting quotations: car(active) =>ACT car([active]) =>ACT, IVE car([[active]]) =>active In the first case, the top level looks for the arguments of `car', and finds `active'. Because M4 evaluates its arguments before applying the macro, `active' is expanded, which results in: car(ACT, IVE) =>ACT In the second case, the top level gives `active' as first and only argument of `car', which results in: active =>ACT, IVE i.e., the argument is evaluated _after_ the macro that invokes it. In the third case, `car' receives `[active]', which results in: [active] =>active exactly as we already saw above. The example above, applied to a more realistic example, gives: car(int tab[10];) =>int tab10; car([int tab[10];]) =>int tab10; car([[int tab[10];]]) =>int tab[10]; Huh? The first case is easily understood, but why is the second wrong, and the third right? To understand that, you must know that after M4 expands a macro, the resulting text is immediately subjected to macro expansion and quote removal. This means that the quote removal occurs twice--first before the argument is passed to the `car' macro, and second after the `car' macro expands to the first argument. As the author of the Autoconf macro `car', you then consider it to be incorrect that your users have to double-quote the arguments of `car', so you "fix" your macro. Let's call it `qar' for quoted car: define([qar], [[$1]]) and check that `qar' is properly fixed: qar([int tab[10];]) =>int tab[10]; Ahhh! That's much better. But note what you've done: now that the arguments are literal strings, if the user wants to use the results of expansions as arguments, she has to use an _unquoted_ macro call: qar(active) =>ACT where she wanted to reproduce what she used to do with `car': car([active]) =>ACT, IVE Worse yet: she wants to use a macro that produces a set of `cpp' macros: define([my_includes], [#include ]) car([my_includes]) =>#include qar(my_includes) error-->EOF in argument list This macro, `qar', because it double quotes its arguments, forces its users to leave their macro calls unquoted, which is dangerous. Commas and other active symbols are interpreted by M4 before they are given to the macro, often not in the way the users expect. Also, because `qar' behaves differently from the other macros, it's an exception that should be avoided in Autoconf. `changequote' is Evil --------------------- The temptation is often high to bypass proper quotation, in particular when it's late at night. Then, many experienced Autoconf hackers finally surrender to the dark side of the force and use the ultimate weapon: `changequote'. The M4 builtin `changequote' belongs to a set of primitives that allow one to adjust the syntax of the language to adjust it to one's needs. For instance, by default M4 uses ``' and `'' as quotes, but in the context of shell programming (and actually of most programming languages), that's about the worst choice one can make: because of strings and back-quoted expressions in shell code (such as `'this'' and ``that`'), because of literal characters in usual programming languages (as in `'0''), there are many unbalanced ``' and `''. Proper M4 quotation then becomes a nightmare, if not impossible. In order to make M4 useful in such a context, its designers have equipped it with `changequote', which makes it possible to choose another pair of quotes. M4sugar, M4sh, Autoconf, and Autotest all have chosen to use `[' and `]'. Not especially because they are unlikely characters, but _because they are characters unlikely to be unbalanced_. There are other magic primitives, such as `changecom' to specify what syntactic forms are comments (it is common to see `changecom()' when M4 is used to produce HTML pages), `changeword' and `changesyntax' to change other syntactic details (such as the character to denote the n-th argument, `$' by default, the parenthesis around arguments etc.). These primitives are really meant to make M4 more useful for specific domains: they should be considered like command line options: `--quotes', `--comments', `--words', and `--syntax'. Nevertheless, they are implemented as M4 builtins, as it makes M4 libraries self contained (no need for additional options). There lies the problem.... The problem is that it is then tempting to use them in the middle of an M4 script, as opposed to its initialization. This, if not carefully thought out, can lead to disastrous effects: _you are changing the language in the middle of the execution_. Changing and restoring the syntax is often not enough: if you happened to invoke macros in between, these macros will be lost, as the current syntax will probably not be the one they were implemented with. Quadrigraphs ------------ When writing an Autoconf macro you may occasionally need to generate special characters that are difficult to express with the standard Autoconf quoting rules. For example, you may need to output the regular expression `[^[]', which matches any character other than `['. This expression contains unbalanced brackets so it cannot be put easily into an M4 macro. You can work around this problem by using one of the following "quadrigraphs": `@<:@' `[' `@:>@' `]' `@S|@' `$' `@%:@' `#' `@&t@' Expands to nothing. Quadrigraphs are replaced at a late stage of the translation process, after `m4' is run, so they do not get in the way of M4 quoting. For example, the string `^@<:@', independently of its quotation, will appear as `^[' in the output. The empty quadrigraph can be used: - to mark trailing spaces explicitly Trailing spaces are smashed by `autom4te'. This is a feature. - to produce other quadrigraphs For instance `@<@&t@:@' produces `@<:@'. - to escape _occurrences_ of forbidden patterns For instance you might want to mention `AC_FOO' in a comment, while still being sure that `autom4te' will still catch unexpanded `AC_*'. Then write `AC@&t@_FOO'. The name `@&t@' was suggested by Paul Eggert: I should give some credit to the `@&t@' pun. The `&' is my own invention, but the `t' came from the source code of the ALGOL68C compiler, written by Steve Bourne (of Bourne shell fame), and which used `mt' to denote the empty string. In C, it would have looked like something like: char const mt[] = ""; but of course the source code was written in Algol 68. I don't know where he got `mt' from: it could have been his own invention, and I suppose it could have been a common pun around the Cambridge University computer lab at the time. Quotation Rule Of Thumb ----------------------- To conclude, the quotation rule of thumb is: _One pair of quotes per pair of parentheses._ Never over-quote, never under-quote, in particular in the definition of macros. In the few places where the macros need to use brackets (usually in C program text or regular expressions), properly quote _the arguments_! It is common to read Autoconf programs with snippets like: AC_TRY_LINK( changequote(<<, >>)dnl <<#include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif>>, changequote([, ])dnl [atoi (*tzname);], ac_cv_var_tzname=yes, ac_cv_var_tzname=no) which is incredibly useless since `AC_TRY_LINK' is _already_ double quoting, so you just need: AC_TRY_LINK( [#include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif], [atoi (*tzname);], [ac_cv_var_tzname=yes], [ac_cv_var_tzname=no]) The M4-fluent reader will note that these two examples are rigorously equivalent, since M4 swallows both the `changequote(<<, >>)' and `<<' `>>' when it "collects" the arguments: these quotes are not part of the arguments! Simplified, the example above is just doing this: changequote(<<, >>)dnl <<[]>> changequote([, ])dnl instead of simply: [[]] With macros that do not double quote their arguments (which is the rule), double-quote the (risky) literals: AC_LINK_IFELSE([AC_LANG_PROGRAM( [[#include #ifndef tzname /* For SGI. */ extern char *tzname[]; /* RS6000 and others reject char **tzname. */ #endif]], [atoi (*tzname);])], [ac_cv_var_tzname=yes], [ac_cv_var_tzname=no]) *Note Quadrigraphs::, for what to do if you run into a hopeless case where quoting does not suffice. When you create a `configure' script using newly written macros, examine it carefully to check whether you need to add more quotes in your macros. If one or more words have disappeared in the M4 output, you need more quotes. When in doubt, quote. However, it's also possible to put on too many layers of quotes. If this happens, the resulting `configure' script will contain unexpanded macros. The `autoconf' program checks for this problem by doing `grep AC_ configure'. Using `autom4te' ================ The Autoconf suite, including M4sugar, M4sh, and Autotest, in addition to Autoconf per se, heavily rely on M4. All these different uses revealed common needs factored into a layer over `m4': `autom4te'(1). `autom4te' should basically considered as a replacement of `m4' itself. ---------- Footnotes ---------- (1) Yet another great name from Lars J. Aas. Invoking `autom4te' ------------------- The command line arguments are modeled after M4's: autom4te OPTIONS FILES where the FILES are directly passed to `m4'. In addition to the regular expansion, it handles the replacement of the quadrigraphs (*note Quadrigraphs::), and of `__oline__', the current line in the output. It supports an extended syntax for the FILES: `FILE.m4f' This file is an M4 frozen file. Note that _all the previous files are ignored_. See the option `--melt' for the rationale. `FILE?' If found in the library path, the FILE is included for expansion, otherwise it is ignored instead of triggering a failure. Of course, it supports the Autoconf common subset of options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Report processing steps. `--debug' `-d' Don't remove the temporary files and be even more verbose. `--include=DIR' `-I DIR' Also look for input files in DIR. Multiple invocations accumulate. `--output=FILE' `-o FILE' Save output (script or trace) to FILE. The file `-' stands for the standard output. As an extension of `m4', it includes the following options: `--warnings=CATEGORY' `-W CATEGORY' Report the warnings related to CATEGORY (which can actually be a comma separated list). *Note Reporting Messages::, macro `AC_DIAGNOSE', for a comprehensive list of categories. Special values include: `all' report all the warnings `none' report none `error' treats warnings as errors `no-CATEGORY' disable warnings falling into CATEGORY Warnings about `syntax' are enabled by default, and the environment variable `WARNINGS', a comma separated list of categories, is honored. `autom4te -W CATEGORY' will actually behave as if you had run: autom4te --warnings=syntax,$WARNINGS,CATEGORY If you want to disable `autom4te''s defaults and `WARNINGS', but (for example) enable the warnings about obsolete constructs, you would use `-W none,obsolete'. `autom4te' displays a back trace for errors, but not for warnings; if you want them, just pass `-W error'. For instance, on this `configure.ac': AC_DEFUN([INNER], [AC_RUN_IFELSE([AC_LANG_PROGRAM([exit (0)])])]) AC_DEFUN([OUTER], [INNER]) AC_INIT OUTER you get: $ autom4te -l autoconf -Wcross configure.ac:8: warning: AC_RUN_IFELSE called without default \ to allow cross compiling $ autom4te -l autoconf -Wcross,error -f configure.ac:8: error: AC_RUN_IFELSE called without default \ to allow cross compiling acgeneral.m4:3044: AC_RUN_IFELSE is expanded from... configure.ac:2: INNER is expanded from... configure.ac:5: OUTER is expanded from... configure.ac:8: the top level `--melt' `-m' Do not use frozen files. Any argument `FILE.m4f' will be replaced with `FILE.m4'. This helps tracing the macros which are executed only when the files are frozen, typically `m4_define'. For instance, running: autom4te --melt 1.m4 2.m4f 3.m4 4.m4f input.m4 is roughly equivalent to running: m4 1.m4 2.m4 3.m4 4.m4 input.m4 while autom4te 1.m4 2.m4f 3.m4 4.m4f input.m4 is equivalent to: m4 --reload-state=4.m4f input.m4 `--freeze' `-f' Produce a frozen state file. `autom4te' freezing is stricter than M4's: it must produce no warnings, and no output other than empty lines (a line with whitespace is _not_ empty) and comments (starting with `#'). Please, note that contrary to `m4', this options takes no argument: autom4te 1.m4 2.m4 3.m4 --freeze --output=3.m4f corresponds to m4 1.m4 2.m4 3.m4 --freeze-state=3.m4f `--mode=OCTAL-MODE' `-m OCTAL-MODE' Set the mode of the non-traces output to OCTAL-MODE; by default `0666'. As another additional feature over `m4', `autom4te' caches its results. GNU M4 is able to produce a regular output and traces at the same time. Traces are heavily used in the GNU Build System: `autoheader' uses them to build `config.h.in', `autoreconf' to determine what GNU Build System components are used, `automake' to "parse" `configure.ac' etc. To save the long runs of `m4', traces are cached while performing regular expansion, and conversely. This cache is (actually, the caches are) stored in the directory `autom4te.cache'. _It can safely be removed_ at any moment (especially if for some reason `autom4te' considers it is trashed). `--cache=DIRECTORY' `-C DIRECTORY' Specify the name of the directory where the result should be cached. Passing an empty value disables caching. Be sure to pass a relative path name, as for the time being, global caches are not supported. `--no-cache' Don't cache the results. `--force' `-f' If a cache is used, consider it obsolete (but update it anyway). Because traces are so important to the GNU Build System, `autom4te' provides high level tracing features as compared to M4, and helps exploiting the cache: `--trace=MACRO[:FORMAT]' `-t MACRO[:FORMAT]' Trace the invocations of MACRO according to the FORMAT. Multiple `--trace' arguments can be used to list several macros. Multiple `--trace' arguments for a single macro are not cumulative; instead, you should just make FORMAT as long as needed. The FORMAT is a regular string, with newlines if desired, and several special escape codes. It defaults to `$f:$l:$n:$%'. It can use the following special escapes: `$$' The character `$'. `$f' The filename from which MACRO is called. `$l' The line number from which MACRO is called. `$d' The depth of the MACRO call. This is an M4 technical detail that you probably don't want to know about. `$n' The name of the MACRO. `$NUM' The NUMth argument of the call to MACRO. `$@' `$SEP@' `${SEPARATOR}@' All the arguments passed to MACRO, separated by the character SEP or the string SEPARATOR (`,' by default). Each argument is quoted, i.e., enclosed in a pair of square brackets. `$*' `$SEP*' `${SEPARATOR}*' As above, but the arguments are not quoted. `$%' `$SEP%' `${SEPARATOR}%' As above, but the arguments are not quoted, all new line characters in the arguments are smashed, and the default separator is `:'. The escape `$%' produces single-line trace outputs (unless you put newlines in the `separator'), while `$@' and `$*' do not. *Note autoconf Invocation::, for examples of trace uses. `--preselect=MACRO' `-p MACRO' Cache the traces of MACRO, but do not enable traces. This is especially important to save CPU cycles in the future. For instance, when invoked, `autoconf' preselects all the macros that `autoheader', `automake', `autoreconf' etc. will trace, so that running `m4' is not needed to trace them: the cache suffices. This results in a huge speed-up. Finally, `autom4te' introduces the concept of "Autom4te libraries". They consists in a powerful yet extremely simple feature: sets of combined command line arguments: `--language=LANGUAGE' `-l =LANGUAGE' Use the LANGUAGE Autom4te library. Current languages include: `M4sugar' create M4sugar output. `M4sh' create M4sh executable shell scripts. `Autotest' create Autotest executable test suites. `Autoconf' create Autoconf executable configure scripts. `--prepend-include=DIR' `-B DIR' Prepend directory DIR to the search path. This is used to include the language-specific files before any third-party macros. As an example, if Autoconf is installed in its default location, `/usr/local', running `autom4te -l m4sugar foo.m4' is strictly equivalent to running `autom4te --prepend-include /usr/local/share/autoconf m4sugar/m4sugar.m4f --warnings syntax foo.m4'. Recursive expansion applies: running `autom4te -l m4sh foo.m4' is the same as `autom4te --language M4sugar m4sugar/m4sh.m4f foo.m4', i.e., `autom4te --prepend-include /usr/local/share/autoconf m4sugar/m4sugar.m4f m4sugar/m4sh.m4f --mode 777 foo.m4'. The definition of the languages is stored in `autom4te.cfg'. Customizing `autom4te' ---------------------- One can customize `autom4te' via `~/.autom4te.cfg' (i.e., as found in the user home directory), and `./.autom4te.cfg' (i.e., as found in the directory from which `autom4te' is run). The order is first reading `autom4te.cfg', then `~/.autom4te.cfg', then `./.autom4te.cfg', and finally the command line arguments. In these text files, comments are introduced with `#', and empty lines are ignored. Customization is performed on a per-language basis, wrapped in between a `begin-language: "LANGUAGE"', `end-language: "LANGUAGE"' pair. Customizing a language stands for appending options (*note autom4te Invocation::) to the current definition of the language. Options, and more generally arguments, are introduced by `args: ARGUMENTS'. You may use the traditional shell syntax to quote the ARGUMENTS. As an example, to disable Autoconf caches (`autom4te.cache') globally, include the following lines in `~/.autom4te.cfg': ## ------------------ ## ## User Preferences. ## ## ------------------ ## begin-language: "Autoconf" args: --no-cache end-language: "Autoconf" Programming in M4sugar ====================== M4 by itself provides only a small, but sufficient, set of all-purpose macros. M4sugar introduces additional generic macros. Its name was coined by Lars J. Aas: "Readability And Greater Understanding Stands 4 M4sugar". Redefined M4 Macros ------------------- With a few exceptions, all the M4 native macros are moved in the `m4_' pseudo-namespace, e.g., M4sugar renames `define' as `m4_define' etc. Some M4 macros are redefined, and are slightly incompatible with their native equivalent. - Macro: dnl This macro kept its original name: no `m4_dnl' is defined. - Macro: m4_defn (MACRO) Contrary to the M4 builtin, this macro fails if MACRO is not defined. See `m4_undefine'. - Macro: m4_exit (EXIT-STATUS) This macro corresponds to `m4exit'. - Macro: m4_if (COMMENT) - Macro: m4_if (STRING-1, STRING-2, EQUAL, [NOT-EQUAL]) - Macro: m4_if (STRING-1, STRING-2, EQUAL, ...) This macro corresponds to `ifelse'. - Macro: m4_undefine (MACRO) Contrary to the M4 builtin, this macro fails if MACRO is not defined. Use m4_ifdef([MACRO], [m4_undefine([MACRO])]) to recover the behavior of the builtin. - Macro: m4_bpatsubst (STRING, REGEXP, [REPLACEMENT]) This macro corresponds to `patsubst'. The name `m4_patsubst' is kept for future versions of M4sh, on top of GNU M4 which will provide extended regular expression syntax via `epatsubst'. - Macro: m4_popdef (MACRO) Contrary to the M4 builtin, this macro fails if MACRO is not defined. See `m4_undefine'. - Macro: m4_bregexp (STRING, REGEXP, [REPLACEMENT]) This macro corresponds to `regexp'. The name `m4_regexp' is kept for future versions of M4sh, on top of GNU M4 which will provide extended regular expression syntax via `eregexp'. - Macro: m4_wrap (TEXT) This macro corresponds to `m4wrap'. You are encouraged to end TEXT with `[]', so that there are no risks that two consecutive invocations of `m4_wrap' result in an unexpected pasting of tokens, as in m4_define([foo], [Foo]) m4_define([bar], [Bar]) m4_define([foobar], [FOOBAR]) m4_wrap([bar]) m4_wrap([foo]) =>FOOBAR Evaluation Macros ----------------- The following macros give some control over the order of the evaluation by adding or removing levels of quotes. They are meant for hard-core M4 programmers. - Macro: m4_dquote (ARG1, ...) Return the arguments as a quoted list of quoted arguments. - Macro: m4_quote (ARG1, ...) Return the arguments as a single entity, i.e., wrap them into a pair of quotes. The following example aims at emphasizing the difference between (i), not using these macros, (ii), using `m4_quote', and (iii), using `m4_dquote'. $ cat example.m4 # Overquote, so that quotes are visible. m4_define([show], [$[]1 = [$1], $[]@ = [$@]]) m4_divert(0)dnl show(a, b) show(m4_quote(a, b)) show(m4_dquote(a, b)) $ autom4te -l m4sugar example.m4 $1 = a, $@ = [a],[b] $1 = a,b, $@ = [a,b] $1 = [a],[b], $@ = [[a],[b]] Forbidden Patterns ------------------ M4sugar provides a means to define suspicious patterns, patterns describing tokens which should not be found in the output. For instance, if an Autoconf `configure' script includes tokens such as `AC_DEFINE', or `dnl', then most probably something went wrong (typically a macro was not evaluated because of overquotation). M4sugar forbids all the tokens matching `^m4_' and `^dnl$'. - Macro: m4_pattern_forbid (PATTERN) Declare that no token matching PATTERN must be found in the output. Comments are not checked; this can be a problem if, for instance, you have some macro left unexpanded after an `#include'. No consensus is currently found in the Autoconf community, as some people consider it should be valid to name macros in comments (which doesn't makes sense to the author of this documentation, as `#'-comments should document the output, not the input, documented by `dnl' comments). Of course, you might encounter exceptions to these generic rules, for instance you might have to refer to `$m4_flags'. - Macro: m4_pattern_allow (PATTERN) Any token matching PATTERN is allowed, including if it matches an `m4_pattern_forbid' pattern. Programming in M4sh =================== M4sh, pronounced "mash", is aiming at producing portable Bourne shell scripts. This name was coined by Lars J. Aas, who notes that, according to the Webster's Revised Unabridged Dictionary (1913): Mash \Mash\, n. [Akin to G. meisch, maisch, meische, maische, mash, wash, and prob. to AS. miscian to mix. See "Mix".] 1. A mass of mixed ingredients reduced to a soft pulpy state by beating or pressure.... 2. A mixture of meal or bran and water fed to animals. 3. A mess; trouble. [Obs.] -Beau. & Fl. For the time being, it is not mature enough to be widely used. M4sh provides portable alternatives for some common shell constructs that unfortunately are not portable in practice. - Macro: AS_DIRNAME (PATHNAME) Return the directory portion of PATHNAME, using the algorithm required by POSIX. *Note Limitations of Usual Tools::, for more details about what this returns and why it is more portable than the `dirname' command. - Macro: AS_MKDIR_P (FILENAME) Make the directory FILENAME, including intervening directories as necessary. This is equivalent to `mkdir -p FILENAME', except that it is portable to older versions of `mkdir' that lack support for the `-p' option. Writing Autoconf Macros *********************** When you write a feature test that could be applicable to more than one software package, the best thing to do is encapsulate it in a new macro. Here are some instructions and guidelines for writing Autoconf macros. Macro Definitions ================= Autoconf macros are defined using the `AC_DEFUN' macro, which is similar to the M4 builtin `m4_define' macro. In addition to defining a macro, `AC_DEFUN' adds to it some code that is used to constrain the order in which macros are called (*note Prerequisite Macros::). An Autoconf macro definition looks like this: AC_DEFUN(MACRO-NAME, MACRO-BODY) You can refer to any arguments passed to the macro as `$1', `$2', etc. *Note How to define new macros: (m4.info)Definitions, for more complete information on writing M4 macros. Be sure to properly quote both the MACRO-BODY _and_ the MACRO-NAME to avoid any problems if the macro happens to have been previously defined. Each macro should have a header comment that gives its prototype, and a brief description. When arguments have default values, display them in the prototype. For example: # AC_MSG_ERROR(ERROR, [EXIT-STATUS = 1]) # -------------------------------------- m4_define([AC_MSG_ERROR], [{ _AC_ECHO([configure: error: $1], 2); exit m4_default([$2], 1); }]) Comments about the macro should be left in the header comment. Most other comments will make their way into `configure', so just keep using `#' to introduce comments. If you have some very special comments about pure M4 code, comments that make no sense in `configure' and in the header comment, then use the builtin `dnl': it causes M4 to discard the text through the next newline. Keep in mind that `dnl' is rarely needed to introduce comments; `dnl' is more useful to get rid of the newlines following macros that produce no output, such as `AC_REQUIRE'. Macro Names =========== All of the Autoconf macros have all-uppercase names starting with `AC_' to prevent them from accidentally conflicting with other text. All shell variables that they use for internal purposes have mostly-lowercase names starting with `ac_'. To ensure that your macros don't conflict with present or future Autoconf macros, you should prefix your own macro names and any shell variables they use with some other sequence. Possibilities include your initials, or an abbreviation for the name of your organization or software package. Most of the Autoconf macros' names follow a structured naming convention that indicates the kind of feature check by the name. The macro names consist of several words, separated by underscores, going from most general to most specific. The names of their cache variables use the same convention (*note Cache Variable Names::, for more information on them). The first word of the name after `AC_' usually tells the category of the feature being tested. Here are the categories used in Autoconf for specific test macros, the kind of macro that you are more likely to write. They are also used for cache variables, in all-lowercase. Use them where applicable; where they're not, invent your own categories. `C' C language builtin features. `DECL' Declarations of C variables in header files. `FUNC' Functions in libraries. `GROUP' UNIX group owners of files. `HEADER' Header files. `LIB' C libraries. `PATH' The full path names to files, including programs. `PROG' The base names of programs. `MEMBER' Members of aggregates. `SYS' Operating system features. `TYPE' C builtin or declared types. `VAR' C variables in libraries. After the category comes the name of the particular feature being tested. Any further words in the macro name indicate particular aspects of the feature. For example, `AC_FUNC_UTIME_NULL' checks the behavior of the `utime' function when called with a `NULL' pointer. An internal macro should have a name that starts with an underscore; Autoconf internals should therefore start with `_AC_'. Additionally, a macro that is an internal subroutine of another macro should have a name that starts with an underscore and the name of that other macro, followed by one or more words saying what the internal macro does. For example, `AC_PATH_X' has internal macros `_AC_PATH_X_XMKMF' and `_AC_PATH_X_DIRECT'. Reporting Messages ================== When macros statically diagnose abnormal situations, benign or fatal, they should report them using these macros. For dynamic issues, i.e., when `configure' is run, see *Note Printing Messages::. - Macro: AC_DIAGNOSE (CATEGORY, MESSAGE) Report MESSAGE as a warning (or as an error if requested by the user) if warnings of the CATEGORY are turned on. You are encouraged to use standard categories, which currently include: `all' messages that don't fall into one of the following categories. Use of an empty CATEGORY is equivalent. `cross' related to cross compilation issues. `obsolete' use of an obsolete construct. `syntax' dubious syntactic constructs, incorrectly ordered macro calls. - Macro: AC_WARNING (MESSAGE) Equivalent to `AC_DIAGNOSE([syntax], MESSAGE)', but you are strongly encouraged to use a finer grained category. - Macro: AC_FATAL (MESSAGE) Report a severe error MESSAGE, and have `autoconf' die. When the user runs `autoconf -W error', warnings from `AC_DIAGNOSE' and `AC_WARNING' are reported as error, see *Note autoconf Invocation::. Dependencies Between Macros =========================== Some Autoconf macros depend on other macros having been called first in order to work correctly. Autoconf provides a way to ensure that certain macros are called if needed and a way to warn the user if macros are called in an order that might cause incorrect operation. Prerequisite Macros ------------------- A macro that you write might need to use values that have previously been computed by other macros. For example, `AC_DECL_YYTEXT' examines the output of `flex' or `lex', so it depends on `AC_PROG_LEX' having been called first to set the shell variable `LEX'. Rather than forcing the user of the macros to keep track of the dependencies between them, you can use the `AC_REQUIRE' macro to do it automatically. `AC_REQUIRE' can ensure that a macro is only called if it is needed, and only called once. - Macro: AC_REQUIRE (MACRO-NAME) If the M4 macro MACRO-NAME has not already been called, call it (without any arguments). Make sure to quote MACRO-NAME with square brackets. MACRO-NAME must have been defined using `AC_DEFUN' or else contain a call to `AC_PROVIDE' to indicate that it has been called. `AC_REQUIRE' must be used inside an `AC_DEFUN''d macro; it must not be called from the top level. `AC_REQUIRE' is often misunderstood. It really implements dependencies between macros in the sense that if one macro depends upon another, the latter will be expanded _before_ the body of the former. In particular, `AC_REQUIRE(FOO)' is not replaced with the body of `FOO'. For instance, this definition of macros: AC_DEFUN([TRAVOLTA], [test "$body_temperature_in_celsius" -gt "38" && dance_floor=occupied]) AC_DEFUN([NEWTON_JOHN], [test "$hair_style" = "curly" && dance_floor=occupied]) AC_DEFUN([RESERVE_DANCE_FLOOR], [if date | grep '^Sat.*pm' >/dev/null 2>&1; then AC_REQUIRE([TRAVOLTA]) AC_REQUIRE([NEWTON_JOHN]) fi]) with this `configure.ac' AC_INIT RESERVE_DANCE_FLOOR if test "$dance_floor" = occupied; then AC_MSG_ERROR([cannot pick up here, let's move]) fi will not leave you with a better chance to meet a kindred soul at other times than Saturday night since it expands into: test "$body_temperature_in_Celsius" -gt "38" && dance_floor=occupied test "$hair_style" = "curly" && dance_floor=occupied fi if date | grep '^Sat.*pm' >/dev/null 2>&1; then fi This behavior was chosen on purpose: (i) it prevents messages in required macros from interrupting the messages in the requiring macros; (ii) it avoids bad surprises when shell conditionals are used, as in: if ...; then AC_REQUIRE([SOME_CHECK]) fi ... SOME_CHECK You are encouraged to put all `AC_REQUIRE's at the beginning of a macro. You can use `dnl' to avoid the empty lines they leave. Suggested Ordering ------------------ Some macros should be run before another macro if both are called, but neither _requires_ that the other be called. For example, a macro that changes the behavior of the C compiler should be called before any macros that run the C compiler. Many of these dependencies are noted in the documentation. Autoconf provides the `AC_BEFORE' macro to warn users when macros with this kind of dependency appear out of order in a `configure.ac' file. The warning occurs when creating `configure' from `configure.ac', not when running `configure'. For example, `AC_PROG_CPP' checks whether the C compiler can run the C preprocessor when given the `-E' option. It should therefore be called after any macros that change which C compiler is being used, such as `AC_PROG_CC'. So `AC_PROG_CC' contains: AC_BEFORE([$0], [AC_PROG_CPP])dnl This warns the user if a call to `AC_PROG_CPP' has already occurred when `AC_PROG_CC' is called. - Macro: AC_BEFORE (THIS-MACRO-NAME, CALLED-MACRO-NAME) Make M4 print a warning message to the standard error output if CALLED-MACRO-NAME has already been called. THIS-MACRO-NAME should be the name of the macro that is calling `AC_BEFORE'. The macro CALLED-MACRO-NAME must have been defined using `AC_DEFUN' or else contain a call to `AC_PROVIDE' to indicate that it has been called. Obsoleting Macros ================= Configuration and portability technology has evolved over the years. Often better ways of solving a particular problem are developed, or ad-hoc approaches are systematized. This process has occurred in many parts of Autoconf. One result is that some of the macros are now considered "obsolete"; they still work, but are no longer considered the best thing to do, hence they should be replaced with more modern macros. Ideally, `autoupdate' should replace the old macro calls with their modern implementation. Autoconf provides a simple means to obsolete a macro. - Macro: AU_DEFUN (OLD-MACRO, IMPLEMENTATION, [MESSAGE]) Define OLD-MACRO as IMPLEMENTATION. The only difference with `AC_DEFUN' is that the user will be warned that OLD-MACRO is now obsolete. If she then uses `autoupdate', the call to OLD-MACRO will be replaced by the modern IMPLEMENTATION. The additional MESSAGE is then printed. Coding Style ============ The Autoconf macros follow a strict coding style. You are encouraged to follow this style, especially if you intend to distribute your macro, either by contributing it to Autoconf itself, or via other means. The first requirement is to pay great attention to the quotation. For more details, see *Note Autoconf Language::, and *Note M4 Quotation::. Do not try to invent new interfaces. It is likely that there is a macro in Autoconf that resembles the macro you are defining: try to stick to this existing interface (order of arguments, default values, etc.). We _are_ conscious that some of these interfaces are not perfect; nevertheless, when harmless, homogeneity should be preferred over creativity. Be careful about clashes both between M4 symbols and between shell variables. If you stick to the suggested M4 naming scheme (*note Macro Names::), you are unlikely to generate conflicts. Nevertheless, when you need to set a special value, _avoid using a regular macro name_; rather, use an "impossible" name. For instance, up to version 2.13, the macro `AC_SUBST' used to remember what SYMBOLs were already defined by setting `AC_SUBST_SYMBOL', which is a regular macro name. But since there is a macro named `AC_SUBST_FILE', it was just impossible to `AC_SUBST(FILE)'! In this case, `AC_SUBST(SYMBOL)' or `_AC_SUBST(SYMBOL)' should have been used (yes, with the parentheses)...or better yet, high-level macros such as `AC_EXPAND_ONCE'. No Autoconf macro should ever enter the user-variable name space; i.e., except for the variables that are the actual result of running the macro, all shell variables should start with `ac_'. In addition, small macros or any macro that is likely to be embedded in other macros should be careful not to use obvious names. Do not use `dnl' to introduce comments: most of the comments you are likely to write are either header comments which are not output anyway, or comments that should make their way into `configure'. There are exceptional cases where you do want to comment special M4 constructs, in which case `dnl' is right, but keep in mind that it is unlikely. M4 ignores the leading spaces before each argument, use this feature to indent in such a way that arguments are (more or less) aligned with the opening parenthesis of the macro being called. For instance, instead of AC_CACHE_CHECK(for EMX OS/2 environment, ac_cv_emxos2, [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(, [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) write AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2], [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) or even AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2], [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) When using `AC_RUN_IFELSE' or any macro that cannot work when cross-compiling, provide a pessimistic value (typically `no'). Feel free to use various tricks to prevent auxiliary tools, such as syntax-highlighting editors, from behaving improperly. For instance, instead of: m4_bpatsubst([$1], [$"]) use m4_bpatsubst([$1], [$""]) so that Emacsen do not open an endless "string" at the first quote. For the same reasons, avoid: test $[#] != 0 and use: test $[@%:@] != 0 Otherwise, the closing bracket would be hidden inside a `#'-comment, breaking the bracket-matching highlighting from Emacsen. Note the preferred style to escape from M4: `$[1]', `$[@]', etc. Do not escape when it is unnecessary. Common examples of useless quotation are `[$]$1' (write `$$1'), `[$]var' (use `$var'), etc. If you add portability issues to the picture, you'll prefer `${1+"$[@]"}' to `"[$]@"', and you'll prefer do something better than hacking Autoconf `:-)'. When using `sed', don't use `-e' except for indenting purpose. With the `s' command, the preferred separator is `/' unless `/' itself is used in the command, in which case you should use `,'. *Note Macro Definitions::, for details on how to define a macro. If a macro doesn't use `AC_REQUIRE' and it is expected to never be the object of an `AC_REQUIRE' directive, then use `m4_define'. In case of doubt, use `AC_DEFUN'. All the `AC_REQUIRE' statements should be at the beginning of the macro, `dnl''ed. You should not rely on the number of arguments: instead of checking whether an argument is missing, test that it is not empty. It provides both a simpler and a more predictable interface to the user, and saves room for further arguments. Unless the macro is short, try to leave the closing `])' at the beginning of a line, followed by a comment that repeats the name of the macro being defined. This introduces an additional newline in `configure'; normally, that is not a problem, but if you want to remove it you can use `[]dnl' on the last line. You can similarly use `[]dnl' after a macro call to remove its newline. `[]dnl' is recommended instead of `dnl' to ensure that M4 does not interpret the `dnl' as being attached to the preceding text or macro output. For example, instead of: AC_DEFUN([AC_PATH_X], [AC_MSG_CHECKING([for X]) AC_REQUIRE_CPP() # ...omitted... AC_MSG_RESULT([libraries $x_libraries, headers $x_includes]) fi]) you would write: AC_DEFUN([AC_PATH_X], [AC_REQUIRE_CPP()[]dnl AC_MSG_CHECKING([for X]) # ...omitted... AC_MSG_RESULT([libraries $x_libraries, headers $x_includes]) fi[]dnl ])# AC_PATH_X If the macro is long, try to split it into logical chunks. Typically, macros that check for a bug in a function and prepare its `AC_LIBOBJ' replacement should have an auxiliary macro to perform this setup. Do not hesitate to introduce auxiliary macros to factor your code. In order to highlight the recommended coding style, here is a macro written the old way: dnl Check for EMX on OS/2. dnl _AC_EMXOS2 AC_DEFUN(_AC_EMXOS2, [AC_CACHE_CHECK(for EMX OS/2 environment, ac_cv_emxos2, [AC_COMPILE_IFELSE([AC_LANG_PROGRAM(, return __EMX__;)], ac_cv_emxos2=yes, ac_cv_emxos2=no)]) test "$ac_cv_emxos2" = yes && EMXOS2=yes]) and the new way: # _AC_EMXOS2 # ---------- # Check for EMX on OS/2. m4_define([_AC_EMXOS2], [AC_CACHE_CHECK([for EMX OS/2 environment], [ac_cv_emxos2], [AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [return __EMX__;])], [ac_cv_emxos2=yes], [ac_cv_emxos2=no])]) test "$ac_cv_emxos2" = yes && EMXOS2=yes[]dnl ])# _AC_EMXOS2 Portable Shell Programming ************************** When writing your own checks, there are some shell-script programming techniques you should avoid in order to make your code portable. The Bourne shell and upward-compatible shells like the Korn shell and Bash have evolved over the years, but to prevent trouble, do not take advantage of features that were added after UNIX version 7, circa 1977 (*note Systemology::). You should not use shell functions, aliases, negated character classes, or other features that are not found in all Bourne-compatible shells; restrict yourself to the lowest common denominator. Even `unset' is not supported by all shells! Also, include a space after the exclamation point in interpreter specifications, like this: #! /usr/bin/perl If you omit the space before the path, then 4.2BSD based systems (such as DYNIX) will ignore the line, because they interpret `#! /' as a 4-byte magic number. Some old systems have quite small limits on the length of the `#!' line too, for instance 32 bytes (not including the newline) on SunOS 4. The set of external programs you should run in a `configure' script is fairly small. *Note Utilities in Makefiles: (standards)Utilities in Makefiles, for the list. This restriction allows users to start out with a fairly small set of programs and build the rest, avoiding too many interdependencies between packages. Some of these external utilities have a portable subset of features; see *Note Limitations of Usual Tools::. There are other sources of documentation about shells. See for instance the Shell FAQs(1). ---------- Footnotes ---------- (1) the Shell FAQs, . Shellology ========== There are several families of shells, most prominently the Bourne family and the C shell family which are deeply incompatible. If you want to write portable shell scripts, avoid members of the C shell family. The the Shell difference FAQ(1) includes a small history of Unix shells, and a comparison between several of them. Below we describe some of the members of the Bourne shell family. Ash `ash' is often used on GNU/Linux and BSD systems as a light-weight Bourne-compatible shell. Ash 0.2 has some bugs that are fixed in the 0.3.x series, but portable shell scripts should work around them, since version 0.2 is still shipped with many GNU/Linux distributions. To be compatible with Ash 0.2: - don't use `$?' after expanding empty or unset variables: foo= false $foo echo "Don't use it: $?" - don't use command substitution within variable expansion: cat ${FOO=`bar`} - beware that single builtin substitutions are not performed by a subshell, hence their effect applies to the current shell! *Note Shell Substitutions::, item "Command Substitution". Bash To detect whether you are running `bash', test if `BASH_VERSION' is set. To disable its extensions and require POSIX compatibility, run `set -o posix'. *Note Bash POSIX Mode: (bash)Bash POSIX Mode, for details. Bash 2.05 and later Versions 2.05 and later of `bash' use a different format for the output of the `set' builtin, designed to make evaluating its output easier. However, this output is not compatible with earlier versions of `bash' (or with many other shells, probably). So if you use `bash' 2.05 or higher to execute `configure', you'll need to use `bash' 2.05 for all other build tasks as well. `/usr/xpg4/bin/sh' on Solaris The POSIX-compliant Bourne shell on a Solaris system is `/usr/xpg4/bin/sh' and is part of an extra optional package. There is no extra charge for this package, but it is also not part of a minimal OS install and therefore some folks may not have it. Zsh To detect whether you are running `zsh', test if `ZSH_VERSION' is set. By default `zsh' is _not_ compatible with the Bourne shell: you have to run `emulate sh' and set `NULLCMD' to `:'. *Note Compatibility: (zsh)Compatibility, for details. Zsh 3.0.8 is the native `/bin/sh' on Mac OS X 10.0.3. The following discussion between Russ Allbery and Robert Lipe is worth reading: Russ Allbery: The GNU assumption that `/bin/sh' is the one and only shell leads to a permanent deadlock. Vendors don't want to break users' existing shell scripts, and there are some corner cases in the Bourne shell that are not completely compatible with a POSIX shell. Thus, vendors who have taken this route will _never_ (OK..."never say never") replace the Bourne shell (as `/bin/sh') with a POSIX shell. Robert Lipe: This is exactly the problem. While most (at least most System V's) do have a Bourne shell that accepts shell functions most vendor `/bin/sh' programs are not the POSIX shell. So while most modern systems do have a shell _somewhere_ that meets the POSIX standard, the challenge is to find it. ---------- Footnotes ---------- (1) the Shell difference FAQ, . Here-Documents ============== Don't rely on `\' being preserved just because it has no special meaning together with the next symbol. In the native `/bin/sh' on OpenBSD 2.7 `\"' expands to `"' in here-documents with unquoted delimiter. As a general rule, if `\\' expands to `\' use `\\' to get `\'. With OpenBSD 2.7's `/bin/sh' $ cat < \" \\ > EOF " \ and with Bash: bash-2.04$ cat < \" \\ > EOF \" \ Many older shells (including the Bourne shell) implement here-documents inefficiently. And some shells mishandle large here-documents: for example, Solaris 8 `dtksh', which is derived from `ksh' M-12/28/93d, mishandles variable expansion that occurs on 1024-byte buffer boundaries within a here-document. Users can generally fix these problems by using a faster or more reliable shell, e.g., by using the command `bash ./configure' rather than plain `./configure'. Some shells can be extremely inefficient when there are a lot of here-documents inside a single statement. For instance if your `configure.ac' includes something like: if ; then assume this and that else check this check that check something else ... on and on forever ... fi A shell parses the whole `if'/`fi' construct, creating temporary files for each here document in it. Some shells create links for such here-documents on every `fork', so that the clean-up code they had installed correctly removes them. It is creating the links that can take the shell forever. Moving the tests out of the `if'/`fi', or creating multiple `if'/`fi' constructs, would improve the performance significantly. Anyway, this kind of construct is not exactly the typical use of Autoconf. In fact, it's even not recommended, because M4 macros can't look into shell conditionals, so we may fail to expand a macro when it was expanded before in a conditional path, and the condition turned out to be false at run-time, and we end up not executing the macro at all. File Descriptors ================ Some file descriptors shall not be used, since some systems, admittedly arcane, use them for special purpose: 3 --- some systems may open it to `/dev/tty'. 4 --- used on the Kubota Titan. Don't redirect the same file descriptor several times, as you are doomed to failure under Ultrix. ULTRIX V4.4 (Rev. 69) System #31: Thu Aug 10 19:42:23 GMT 1995 UWS V4.4 (Rev. 11) $ eval 'echo matter >fullness' >void illegal io $ eval '(echo matter >fullness)' >void illegal io $ (eval '(echo matter >fullness)') >void Ambiguous output redirect. In each case the expected result is of course `fullness' containing `matter' and `void' being empty. Don't try to redirect the standard error of a command substitution: it must be done _inside_ the command substitution: when running `: `cd /zorglub` 2>/dev/null' expect the error message to escape, while `: `cd /zorglub 2>/dev/null`' works properly. It is worth noting that Zsh (but not Ash nor Bash) makes it possible in assignments though: `foo=`cd /zorglub` 2>/dev/null'. Most shells, if not all (including Bash, Zsh, Ash), output traces on stderr, even for sub-shells. This might result in undesirable content if you meant to capture the standard-error output of the inner command: $ ash -x -c '(eval "echo foo >&2") 2>stderr' $ cat stderr + eval echo foo >&2 + echo foo foo $ bash -x -c '(eval "echo foo >&2") 2>stderr' $ cat stderr + eval 'echo foo >&2' ++ echo foo foo $ zsh -x -c '(eval "echo foo >&2") 2>stderr' # Traces on startup files deleted here. $ cat stderr +zsh:1> eval echo foo >&2 +zsh:1> echo foo foo You'll appreciate the various levels of detail.... One workaround is to grep out uninteresting lines, hoping not to remove good ones.... Don't try to move/delete open files, such as in `exec >foo; mv foo bar'; see *Note Limitations of Builtins::, `mv' for more details. File System Conventions ======================= While `autoconf' and friends will usually be run on some Unix variety, it can and will be used on other systems, most notably DOS variants. This impacts several assumptions regarding file and path names. For example, the following code: case $foo_dir in /*) # Absolute ;; *) foo_dir=$dots$foo_dir ;; esac will fail to properly detect absolute paths on those systems, because they can use a drivespec, and will usually use a backslash as directory separator. The canonical way to check for absolute paths is: case $foo_dir in [\\/]* | ?:[\\/]* ) # Absolute ;; *) foo_dir=$dots$foo_dir ;; esac Make sure you quote the brackets if appropriate and keep the backslash as first character (*note Limitations of Builtins::). Also, because the colon is used as part of a drivespec, these systems don't use it as path separator. When creating or accessing paths, use the `PATH_SEPARATOR' output variable instead. `configure' sets this to the appropriate value (`:' or `;') when it starts up. File names need extra care as well. While DOS-based environments that are Unixy enough to run `autoconf' (such as DJGPP) will usually be able to handle long file names properly, there are still limitations that can seriously break packages. Several of these issues can be easily detected by the doschk(1) package. A short overview follows; problems are marked with SFN/LFN to indicate where they apply: SFN means the issues are only relevant to plain DOS, not to DOS boxes under Windows, while LFN identifies problems that exist even under Windows. No multiple dots (SFN) DOS cannot handle multiple dots in filenames. This is an especially important thing to remember when building a portable configure script, as `autoconf' uses a .in suffix for template files. This is perfectly OK on Unices: AC_CONFIG_HEADERS([config.h]) AC_CONFIG_FILES([source.c foo.bar]) AC_OUTPUT but it causes problems on DOS, as it requires `config.h.in', `source.c.in' and `foo.bar.in'. To make your package more portable to DOS-based environments, you should use this instead: AC_CONFIG_HEADERS([config.h:config.hin]) AC_CONFIG_FILES([source.c:source.cin foo.bar:foobar.in]) AC_OUTPUT No leading dot (SFN) DOS cannot handle filenames that start with a dot. This is usually not a very important issue for `autoconf'. Case insensitivity (LFN) DOS is case insensitive, so you cannot, for example, have both a file called `INSTALL' and a directory called `install'. This also affects `make'; if there's a file called `INSTALL' in the directory, `make install' will do nothing (unless the `install' target is marked as PHONY). The 8+3 limit (SFN) Because the DOS file system only stores the first 8 characters of the filename and the first 3 of the extension, those must be unique. That means that `foobar-part1.c', `foobar-part2.c' and `foobar-prettybird.c' all resolve to the same filename (`FOOBAR-P.C'). The same goes for `foo.bar' and `foo.bartender'. Note: This is not usually a problem under Windows, as it uses numeric tails in the short version of filenames to make them unique. However, a registry setting can turn this behavior off. While this makes it possible to share file trees containing long file names between SFN and LFN environments, it also means the above problem applies there as well. Invalid characters Some characters are invalid in DOS filenames, and should therefore be avoided. In a LFN environment, these are `/', `\', `?', `*', `:', `<', `>', `|' and `"'. In a SFN environment, other characters are also invalid. These include `+', `,', `[' and `]'. ---------- Footnotes ---------- (1) doschk, . Shell Substitutions =================== Contrary to a persistent urban legend, the Bourne shell does not systematically split variables and back-quoted expressions, in particular on the right-hand side of assignments and in the argument of `case'. For instance, the following code: case "$given_srcdir" in .) top_srcdir="`echo "$dots" | sed 's,/$,,'`" *) top_srcdir="$dots$given_srcdir" ;; esac is more readable when written as: case $given_srcdir in .) top_srcdir=`echo "$dots" | sed 's,/$,,'` *) top_srcdir=$dots$given_srcdir ;; esac and in fact it is even _more_ portable: in the first case of the first attempt, the computation of `top_srcdir' is not portable, since not all shells properly understand `"`..."..."...`"'. Worse yet, not all shells understand `"`...\"...\"...`"' the same way. There is just no portable way to use double-quoted strings inside double-quoted back-quoted expressions (pfew!). `$@' One of the most famous shell-portability issues is related to `"$@"'. When there are no positional arguments, POSIX says that `"$@"' is supposed to be equivalent to nothing, but the original Unix Version 7 Bourne shell treated it as equivalent to `""' instead, and this behavior survives in later implementations like Digital Unix 5.0. The traditional way to work around this portability problem is to use `${1+"$@"}'. Unfortunately this method does not work with Zsh (3.x and 4.x), which is used on Mac OS X. When emulating the Bourne shell, Zsh performs word splitting on `${1+"$@"}': zsh $ emulate sh zsh $ for i in "$@"; do echo $i; done Hello World ! zsh $ for i in ${1+"$@"}; do echo $i; done Hello World ! Zsh handles plain `"$@"' properly, but we can't use plain `"$@"' because of the portability problems mentioned above. One workaround relies on Zsh's "global aliases" to convert `${1+"$@"}' into `"$@"' by itself: test "${ZSH_VERSION+set}" = set && alias -g '${1+"$@"}'='"$@"' A more conservative workaround is to avoid `"$@"' if it is possible that there may be no positional arguments. For example, instead of: cat conftest.c "$@" you can use this instead: case $# in 0) cat conftest.c;; *) cat conftest.c "$@";; esac `${VAR:-VALUE}' Old BSD shells, including the Ultrix `sh', don't accept the colon for any shell substitution, and complain and die. `${VAR=LITERAL}' Be sure to quote: : ${var='Some words'} otherwise some shells, such as on Digital Unix V 5.0, will die because of a "bad substitution". Solaris' `/bin/sh' has a frightening bug in its interpretation of this. Imagine you need set a variable to a string containing `}'. This `}' character confuses Solaris' `/bin/sh' when the affected variable was already set. This bug can be exercised by running: $ unset foo $ foo=${foo='}'} $ echo $foo } $ foo=${foo='}' # no error; this hints to what the bug is $ echo $foo } $ foo=${foo='}'} $ echo $foo }} ^ ugh! It seems that `}' is interpreted as matching `${', even though it is enclosed in single quotes. The problem doesn't happen using double quotes. `${VAR=EXPANDED-VALUE}' On Ultrix, running default="yu,yaa" : ${var="$default"} will set VAR to `M-yM-uM-,M-yM-aM-a', i.e., the 8th bit of each char will be set. You won't observe the phenomenon using a simple `echo $var' since apparently the shell resets the 8th bit when it expands $var. Here are two means to make this shell confess its sins: $ cat -v </dev/null 2>&1 && unset CDPATH Autoconf-generated scripts automatically unset `CDPATH' if possible, so you need not worry about this problem in those scripts. `IFS' Don't set the first character of `IFS' to backslash. Indeed, Bourne shells use the first character (backslash) when joining the components in `"$@"' and some shells then re-interpret (!) the backslash escapes, so you can end up with backspace and other strange characters. The proper value for `IFS' (in regular code, not when performing splits) is `'. The first character is especially important, as it is used to join the arguments in `@*'. `LANG' `LC_ALL' `LC_COLLATE' `LC_CTYPE' `LC_MESSAGES' `LC_MONETARY' `LC_NUMERIC' `LC_TIME' Autoconf-generated scripts normally set all these variables to `C' because so much configuration code assumes the C locale and POSIX requires that locale environment variables be set to `C' if the C locale is desired. However, some older, nonstandard systems (notably SCO) break if locale environment variables are set to `C', so when running on these systems Autoconf-generated scripts unset the variables instead. `LANGUAGE' `LANGUAGE' is not specified by POSIX, but it is a GNU extension that overrides `LC_ALL' in some cases, so Autoconf-generated scripts set it too. `LC_ADDRESS' `LC_IDENTIFICATION' `LC_MEASUREMENT' `LC_NAME' `LC_PAPER' `LC_TELEPHONE' These locale environment variables are GNU extensions. They are treated like their POSIX brethren (`LC_COLLATE', etc.) as described above. `LINENO' Most modern shells provide the current line number in `LINENO'. Its value is the line number of the beginning of the current command. Autoconf attempts to execute `configure' with a modern shell. If no such shell is available, it attempts to implement `LINENO' with a Sed prepass that replaces each instance of the string `$LINENO' (not followed by an alphanumeric character) with the line's number. You should not rely on `LINENO' within `eval', as the behavior differs in practice. Also, the possibility of the Sed prepass means that you should not rely on `$LINENO' when quoted, when in here-documents, or when in long commands that cross line boundaries. Subshells should be OK, though. In the following example, lines 1, 6, and 9 are portable, but the other instances of `LINENO' are not: $ cat lineno echo 1. $LINENO cat < N > s,$,-, > : loop > s,^\([0-9]*\)\(.*\)[$]LINENO\([^a-zA-Z0-9_]\),\1\2\1\3, > t loop > s,-$,, > s,^[0-9]*\n,, > ' | > sh 1. 1 3. 3 4. 4 6. 6 7. 7 8. 8 9. 9 10. 10 `NULLCMD' When executing the command `>foo', `zsh' executes `$NULLCMD >foo'. The Bourne shell considers `NULLCMD' to be `:', while `zsh', even in Bourne shell compatibility mode, sets `NULLCMD' to `cat'. If you forgot to set `NULLCMD', your script might be suspended waiting for data on its standard input. `ENV' `MAIL' `MAILPATH' `PS1' `PS2' `PS4' These variables should not matter for shell scripts, since they are supposed to affect only interactive shells. However, at least one shell (the pre-3.0 UWIN `ksh') gets confused about whether it is interactive, which means that (for example) a `PS1' with a side effect can unexpectedly modify `$?'. To work around this bug, Autoconf-generated scripts do something like this: (unset ENV) >/dev/null 2>&1 && unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' `PWD' POSIX 1003.1-2001 requires that `cd' and `pwd' must update the `PWD' environment variable to point to the logical path to the current directory, but traditional shells do not support this. This can cause confusion if one shell instance maintains `PWD' but a subsidiary and different shell does not know about `PWD' and executes `cd'; in this case `PWD' will point to the wrong directory. Use ``pwd`' rather than `$PWD'. `status' This variable is an alias to `$?' for `zsh' (at least 3.1.6), hence read-only. Do not use it. `PATH_SEPARATOR' If it is not set, `configure' will detect the appropriate path separator for the build system and set the `PATH_SEPARATOR' output variable accordingly. On DJGPP systems, the `PATH_SEPARATOR' environment variable can be set to either `:' or `;' to control the path separator `bash' uses to set up certain environment variables (such as `PATH'). Since this only works inside `bash', you want `configure' to detect the regular DOS path separator (`;'), so it can be safely substituted in files that may not support `;' as path separator. So it is recommended to either unset this variable or set it to `;'. `RANDOM' Many shells provide `RANDOM', a variable that returns a different integer each time it is used. Most of the time, its value does not change when it is not used, but on IRIX 6.5 the value changes all the time. This can be observed by using `set'. Limitations of Shell Builtins ============================= No, no, we are serious: some shells do have limitations! :) You should always keep in mind that any builtin or command may support options, and therefore have a very different behavior with arguments starting with a dash. For instance, the innocent `echo "$word"' can give unexpected results when `word' starts with a dash. It is often possible to avoid this problem using `echo "x$word"', taking the `x' into account later in the pipe. `.' Use `.' only with regular files (use `test -f'). Bash 2.03, for instance, chokes on `. /dev/null'. Also, remember that `.' uses `PATH' if its argument contains no slashes, so if you want to use `.' on a file `foo' in the current directory, you must use `. ./foo'. `!' You can't use `!'; you'll have to rewrite your code. `break' The use of `break 2' etc. is safe. `cd' POSIX 1003.1-2001 requires that `cd' must support the `-L' ("logical") and `-P' ("physical") options, with `-L' being the default. However, traditional shells do not support these options, and their `cd' command has the `-P' behavior. Portable scripts should assume neither option is supported, and should assume neither behavior is the default. This can be a bit tricky, since the POSIX default behavior means that, for example, `ls ..' and `cd ..' may refer to different directories if the current logical directory is a symbolic link. It is safe to use `cd DIR' if DIR contains no `..' components. Also, Autoconf-generated scripts check for this problem when computing variables like `ac_top_srcdir' (*note Configuration Actions::), so it is safe to `cd' to these variables. Also please see the discussion of the `pwd' command. `case' You don't need to quote the argument; no splitting is performed. You don't need the final `;;', but you should use it. Because of a bug in its `fnmatch', `bash' fails to properly handle backslashes in character classes: bash-2.02$ case /tmp in [/\\]*) echo OK;; esac bash-2.02$ This is extremely unfortunate, since you are likely to use this code to handle UNIX or MS-DOS absolute paths. To work around this bug, always put the backslash first: bash-2.02$ case '\TMP' in [\\/]*) echo OK;; esac OK bash-2.02$ case /tmp in [\\/]*) echo OK;; esac OK Some shells, such as Ash 0.3.8, are confused by an empty `case'/`esac': ash-0.3.8 $ case foo in esac; error-->Syntax error: ";" unexpected (expecting ")") Many shells still do not support parenthesized cases, which is a pity for those of us using tools that rely on balanced parentheses. For instance, Solaris 2.8's Bourne shell: $ case foo in (foo) echo foo;; esac error-->syntax error: `(' unexpected `echo' The simple `echo' is probably the most surprising source of portability troubles. It is not possible to use `echo' portably unless both options and escape sequences are omitted. New applications which are not aiming at portability should use `printf' instead of `echo'. Don't expect any option. *Note Preset Output Variables::, `ECHO_N' etc. for a means to simulate `-n'. Do not use backslashes in the arguments, as there is no consensus on their handling. On `echo '\n' | wc -l', the `sh' of Digital Unix 4.0 and MIPS RISC/OS 4.52, answer 2, but the Solaris' `sh', Bash, and Zsh (in `sh' emulation mode) report 1. Please note that the problem is truly `echo': all the shells understand `'\n'' as the string composed of a backslash and an `n'. Because of these problems, do not pass a string containing arbitrary characters to `echo'. For example, `echo "$foo"' is safe if you know that FOO's value cannot contain backslashes and cannot start with `-', but otherwise you should use a here-document like this: cat </dev/null 2>&1 && ACTION Use `case' where possible since it is faster, being a shell builtin: case $ac_feature in *[!-a-zA-Z0-9_]*) ACTION;; esac Alas, negated character classes are probably not portable, although no shell is known to not support the POSIX syntax `[!...]' (when in interactive mode, `zsh' is confused by the `[!...]' syntax and looks for an event in its history because of `!'). Many shells do not support the alternative syntax `[^...]' (Solaris, Digital Unix, etc.). One solution can be: expr "$ac_feature" : '.*[^-a-zA-Z0-9_]' >/dev/null && ACTION or better yet expr "x$ac_feature" : '.*[^-a-zA-Z0-9_]' >/dev/null && ACTION `expr "XFOO" : "XBAR"' is more robust than `echo "XFOO" | grep "^XBAR"', because it avoids problems when `FOO' contains backslashes. `trap' It is safe to trap at least the signals 1, 2, 13, and 15. You can also trap 0, i.e., have the `trap' run when the script ends (either via an explicit `exit', or the end of the script). Although POSIX is not absolutely clear on this point, it is widely admitted that when entering the trap `$?' should be set to the exit status of the last command run before the trap. The ambiguity can be summarized as: "when the trap is launched by an `exit', what is the _last_ command run: that before `exit', or `exit' itself?" Bash considers `exit' to be the last command, while Zsh and Solaris 8 `sh' consider that when the trap is run it is _still_ in the `exit', hence it is the previous exit status that the trap receives: $ cat trap.sh trap 'echo $?' 0 (exit 42); exit 0 $ zsh trap.sh 42 $ bash trap.sh 0 The portable solution is then simple: when you want to `exit 42', run `(exit 42); exit 42', the first `exit' being used to set the exit status to 42 for Zsh, and the second to trigger the trap and pass 42 as exit status for Bash. The shell in FreeBSD 4.0 has the following bug: `$?' is reset to 0 by empty lines if the code is inside `trap'. $ trap 'false echo $?' 0 $ exit 0 Fortunately, this bug only affects `trap'. `true' Don't worry: as far as we know `true' is portable. Nevertheless, it's not always a builtin (e.g., Bash 1.x), and the portable shell community tends to prefer using `:'. This has a funny side effect: when asked whether `false' is more portable than `true' Alexandre Oliva answered: In a sense, yes, because if it doesn't exist, the shell will produce an exit status of failure, which is correct for `false', but not for `true'. `unset' You cannot assume the support of `unset'. Nevertheless, because it is extremely useful to disable embarrassing variables such as `PS1', you can test for its existence and use it _provided_ you give a neutralizing value when `unset' is not supported: if (unset FOO) >/dev/null 2>&1; then unset=unset else unset=false fi $unset PS1 || PS1='$ ' *Note Special Shell Variables::, for some neutralizing values. Also, see *Note Limitations of Builtins::, documentation of `export', for the case of environment variables. Limitations of Usual Tools ========================== The small set of tools you can expect to find on any machine can still include some limitations you should be aware of. `awk' Don't leave white spaces before the parentheses in user functions calls; GNU awk will reject it: $ gawk 'function die () { print "Aaaaarg!" } BEGIN { die () }' gawk: cmd. line:2: BEGIN { die () } gawk: cmd. line:2: ^ parse error $ gawk 'function die () { print "Aaaaarg!" } BEGIN { die() }' Aaaaarg! If you want your program to be deterministic, don't depend on `for' on arrays: $ cat for.awk END { arr["foo"] = 1 arr["bar"] = 1 for (i in arr) print i } $ gawk -f for.awk printf "foo\n|foo\n" | $EGREP '^(|foo|bar)$' |foo > printf "bar\nbar|\n" | $EGREP '^(foo|bar|)$' bar| > printf "foo\nfoo|\n|bar\nbar\n" | $EGREP '^(foo||bar)$' foo |bar `$EGREP' also suffers the limitations of `grep'. `expr' No `expr' keyword starts with `x', so use `expr x"WORD" : 'xREGEX'' to keep `expr' from misinterpreting WORD. Don't use `length', `substr', `match' and `index'. `expr' (`|') You can use `|'. Although POSIX does require that `expr ''' return the empty string, it does not specify the result when you `|' together the empty string (or zero) with the empty string. For example: expr '' \| '' GNU/Linux and POSIX.2-1992 return the empty string for this case, but traditional UNIX returns `0' (Solaris is one such example). In POSIX.1-2001, the specification has been changed to match traditional UNIX's behavior (which is bizarre, but it's too late to fix this). Please note that the same problem does arise when the empty string results from a computation, as in: expr bar : foo \| foo : bar Avoid this portability problem by avoiding the empty string. `expr' (`:') Don't use `\?', `\+' and `\|' in patterns, as they are not supported on Solaris. The POSIX standard is ambiguous as to whether `expr 'a' : '\(b\)'' outputs `0' or the empty string. In practice, it outputs the empty string on most platforms, but portable scripts should not assume this. For instance, the QNX 4.25 native `expr' returns `0'. One might think that a way to get a uniform behavior would be to use the empty string as a default value: expr a : '\(b\)' \| '' Unfortunately this behaves exactly as the original expression; see the ``expr' (`:')' entry for more information. Older `expr' implementations (e.g., SunOS 4 `expr' and Solaris 8 `/usr/ucb/expr') have a silly length limit that causes `expr' to fail if the matched substring is longer than 120 bytes. In this case, you might want to fall back on `echo|sed' if `expr' fails. Don't leave, there is some more! The QNX 4.25 `expr', in addition of preferring `0' to the empty string, has a funny behavior in its exit status: it's always 1 when parentheses are used! $ val=`expr 'a' : 'a'`; echo "$?: $val" 0: 1 $ val=`expr 'a' : 'b'`; echo "$?: $val" 1: 0 $ val=`expr 'a' : '\(a\)'`; echo "?: $val" 1: a $ val=`expr 'a' : '\(b\)'`; echo "?: $val" 1: 0 In practice this can be a big problem if you are ready to catch failures of `expr' programs with some other method (such as using `sed'), since you may get twice the result. For instance $ expr 'a' : '\(a\)' || echo 'a' | sed 's/^\(a\)$/\1/' will output `a' on most hosts, but `aa' on QNX 4.25. A simple workaround consists in testing `expr' and use a variable set to `expr' or to `false' according to the result. `fgrep' POSIX 1003.1-2001 no longer requires `fgrep', but many older hosts do not yet support the POSIX replacement `grep -F'. To work around this problem, invoke `AC_PROG_FGREP' and then use `$FGREP'. `find' The option `-maxdepth' seems to be GNU specific. Tru64 v5.1, NetBSD 1.5 and Solaris 2.5 `find' commands do not understand it. The replacement of `{}' is guaranteed only if the argument is exactly _{}_, not if it's only a part of an argument. For instance on DU, and HP-UX 10.20 and HP-UX 11: $ touch foo $ find . -name foo -exec echo "{}-{}" \; {}-{} while GNU `find' reports `./foo-./foo'. `grep' Don't use `grep -s' to suppress output, because `grep -s' on System V does not suppress output, only error messages. Instead, redirect the standard output and standard error (in case the file doesn't exist) of `grep' to `/dev/null'. Check the exit status of `grep' to determine whether it found a match. Don't use multiple regexps with `-e', as some `grep' will only honor the last pattern (e.g., IRIX 6.5 and Solaris 2.5.1). Anyway, Stardent Vistra SVR4 `grep' lacks `-e'... Instead, use extended regular expressions and alternation. Don't rely on `-w', as Irix 6.5.16m's `grep' does not support it. `ln' Don't rely on `ln' having a `-f' option. Symbolic links are not available on old systems; use `$(LN_S)' as a portable substitute. For versions of the DJGPP before 2.04, `ln' emulates soft links to executables by generating a stub that in turn calls the real program. This feature also works with nonexistent files like in the Unix spec. So `ln -s file link' will generate `link.exe', which will attempt to call `file.exe' if run. But this feature only works for executables, so `cp -p' is used instead for these systems. DJGPP versions 2.04 and later have full symlink support. `ls' The portable options are `-acdilrtu'. Modern practice is for `-l' to output both owner and group, but traditional `ls' omits the group. Modern practice is for all diagnostics to go to standard error, but traditional `ls foo' prints the message `foo not found' to standard output if `foo' does not exist. Be careful when writing shell commands like `sources=`ls *.c 2>/dev/null`', since with traditional `ls' this is equivalent to `sources="*.c not found"' if there are no `.c' files. `mkdir' None of `mkdir''s options are portable. Instead of `mkdir -p FILENAME', you should use use `AS_MKDIR_P(FILENAME)' (*note Programming in M4sh::). `mv' The only portable options are `-f' and `-i'. Moving individual files between file systems is portable (it was in V6), but it is not always atomic: when doing `mv new existing', there's a critical section where neither the old nor the new version of `existing' actually exists. Be aware that moving files from `/tmp' can sometimes cause undesirable (but perfectly valid) warnings, even if you created these files. On some systems, creating the file in `/tmp' is setting a guid `wheel' which you may not be part of. So the file is copied, and then the `chgrp' fails: $ touch /tmp/foo $ mv /tmp/foo . error-->mv: ./foo: set owner/group (was: 3830/0): Operation not permitted $ echo $? 0 $ ls foo foo This behavior conforms to POSIX: If the duplication of the file characteristics fails for any reason, mv shall write a diagnostic message to standard error, but this failure shall not cause mv to modify its exit status." Moving directories across mount points is not portable, use `cp' and `rm'. Moving/Deleting open files isn't portable. The following can't be done on DOS/WIN32: exec > foo mv foo bar nor can exec > foo rm -f foo `sed' Patterns should not include the separator (unless escaped), even as part of a character class. In conformance with POSIX, the Cray `sed' will reject `s/[^/]*$//': use `s,[^/]*$,,'. Sed scripts should not use branch labels longer than 8 characters and should not contain comments. Don't include extra `;', as some `sed', such as NetBSD 1.4.2's, try to interpret the second as a command: $ echo a | sed 's/x/x/;;s/x/x/' sed: 1: "s/x/x/;;s/x/x/": invalid command code ; Input should have reasonably long lines, since some `sed' have an input buffer limited to 4000 bytes. Alternation, `\|', is common but POSIX does not require its support, so it should be avoided in portable scripts. Solaris 8 `sed' does not support alternation; e.g., `sed '/a\|b/d'' deletes only lines that contain the literal string `a|b'. Anchors (`^' and `$') inside groups are not portable. Nested parenthesization in patterns (e.g., `\(\(a*\)b*)\)') is quite portable to modern hosts, but is not supported by some older `sed' implementations like SVR3. Of course the option `-e' is portable, but it is not needed. No valid Sed program can start with a dash, so it does not help disambiguating. Its sole usefulness is to help enforcing indentation as in: sed -e INSTRUCTION-1 \ -e INSTRUCTION-2 as opposed to sed INSTRUCTION-1;INSTRUCTION-2 Contrary to yet another urban legend, you may portably use `&' in the replacement part of the `s' command to mean "what was matched". All descendants of Bell Lab's V7 `sed' (at least; we don't have first hand experience with older `sed's) have supported it. POSIX requires that you must not have any white space between `!' and the following command. It is OK to have blanks between the address and the `!'. For instance, on Solaris 8: $ echo "foo" | sed -n '/bar/ ! p' error-->Unrecognized command: /bar/ ! p $ echo "foo" | sed -n '/bar/! p' error-->Unrecognized command: /bar/! p $ echo "foo" | sed -n '/bar/ !p' foo `sed' (`t') Some old systems have `sed' that "forget" to reset their `t' flag when starting a new cycle. For instance on MIPS RISC/OS, and on IRIX 5.3, if you run the following `sed' script (the line numbers are not actual part of the texts): s/keep me/kept/g # a t end # b s/.*/deleted/g # c : end # d on delete me # 1 delete me # 2 keep me # 3 delete me # 4 you get deleted delete me kept deleted instead of deleted deleted kept deleted Why? When processing 1, a matches, therefore sets the t flag, b jumps to d, and the output is produced. When processing line 2, the t flag is still set (this is the bug). Line a fails to match, but `sed' is not supposed to clear the t flag when a substitution fails. Line b sees that the flag is set, therefore it clears it, and jumps to d, hence you get `delete me' instead of `deleted'. When processing 3, t is clear, a matches, so the flag is set, hence b clears the flags and jumps. Finally, since the flag is clear, 4 is processed properly. There are two things one should remember about `t' in `sed'. Firstly, always remember that `t' jumps if _some_ substitution succeeded, not only the immediately preceding substitution. Therefore, always use a fake `t clear; : clear' to reset the t flag where indeed. Secondly, you cannot rely on `sed' to clear the flag at each new cycle. One portable implementation of the script above is: t clear : clear s/keep me/kept/g t end s/.*/deleted/g : end `touch' On some old BSD systems, `touch' or any command that results in an empty file does not update the timestamps, so use a command like `echo' as a workaround. GNU `touch' 3.16r (and presumably all before that) fails to work on SunOS 4.1.3 when the empty file is on an NFS-mounted 4.2 volume. Limitations of Make =================== `make' itself suffers a great number of limitations, only a few of which are listed here. First of all, remember that since commands are executed by the shell, all its weaknesses are inherited.... `$<' POSIX says that the `$<' construct in makefiles can be used only in inference rules and in the `.DEFAULT' rule; its meaning in ordinary rules is unspecified. Solaris 8's `make' for instance will replace it with the argument. Leading underscore in macro names Some `make's don't support leading underscores in macro names, such as on NEWS-OS 4.2R. $ cat Makefile _am_include = # _am_quote = all:; @echo this is test $ make Make: Must be a separator on rules line 2. Stop. $ cat Makefile2 am_include = # am_quote = all:; @echo this is test $ make -f Makefile2 this is test Trailing backslash in macro On some versions of HP-UX, `make' will read multiple newlines following a backslash, continuing to the next non-empty line. For example, FOO = one \ BAR = two test: : FOO is "$(FOO)" : BAR is "$(BAR)" shows `FOO' equal to `one BAR = two'. Other `make's sensibly let a backslash continue only to the immediately following line. Escaped newline in comments According to POSIX, `Makefile' comments start with `#' and continue until an unescaped newline is reached. % cat Makefile # A = foo \ bar \ baz all: @echo ok % make # GNU make ok However in Real World this is not always the case. Some implementations discards anything from `#' up to the end of line, ignoring any trailing backslash. % pmake # BSD make "Makefile", line 3: Need an operator Fatal errors encountered -- cannot continue Therefore, if you want to comment out a multi-line definition, prefix each line with `#', not only the first. # A = foo \ # bar \ # baz `make macro=value' and sub-`make's. A command-line variable definition such as `foo=bar' overrides any definition of `foo' in the `Makefile'. Some `make' implementations (such as GNU `make') will propagate this override to sub-invocations of `make'. This is allowed but not required by POSIX. % cat Makefile foo = foo one: @echo $(foo) $(MAKE) two two: @echo $(foo) % make foo=bar # GNU make 3.79.1 bar make two make[1]: Entering directory `/home/adl' bar make[1]: Leaving directory `/home/adl' % pmake foo=bar # BSD make bar pmake two foo You have a few possibilities if you do want the `foo=bar' override to propagate to sub-`make's. One is to use the `-e' option, which causes all environment variables to have precedence over the `Makefile' macro definitions, and declare foo as an environment variable: % env foo=bar make -e The `-e' option is propagated to sub-`make's automatically, and since the environment is inherited between `make' invocations, the `foo' macro will be overridden in sub-`make's as expected. Using `-e' could have unexpected side-effects if your environment contains some other macros usually defined by the Makefile. (See also the note about `make -e' and `SHELL' below.) Another way to propagate overrides to sub-`make's is to do it manually, from your `Makefile': foo = foo one: @echo $(foo) $(MAKE) foo=$(foo) two two: @echo $(foo) You need to foresee all macros that a user might want to override if you do that. The `SHELL' macro POSIX-compliant `make's internally use the `$(SHELL)' macro to spawn shell processes and execute `Makefile' rules. This is a builtin macro supplied by `make', but it can be modified from the `Makefile' or a command-line argument. Not all `make's will define this `SHELL' macro. OSF/Tru64 `make' is an example; this implementation will always use `/bin/sh'. So it's a good idea to always define `SHELL' in your `Makefile's. If you use Autoconf, do SHELL = @SHELL@ POSIX-compliant `make's should never acquire the value of $(SHELL) from the environment, even when `make -e' is used (otherwise, think about what would happen to your rules if `SHELL=/bin/tcsh'). However not all `make' implementations will make this exception. For instance it's not surprising that OSF/Tru64 `make' doesn't protect `SHELL', since it doesn't use it. % cat Makefile SHELL = /bin/sh FOO = foo all: @echo $(SHELL) @echo $(FOO) % env SHELL=/bin/tcsh FOO=bar make -e # OSF1 V4.0 Make /bin/tcsh bar % env SHELL=/bin/tcsh FOO=bar gmake -e # GNU make /bin/sh bar Comments in rules Never put comments in a rule. Some `make' treat anything starting with a tab as a command for the current rule, even if the tab is immediately followed by a `#'. The `make' from Tru64 Unix V5.1 is one of them. The following `Makefile' will run `# foo' through the shell. all: # foo The `obj/' subdirectory. Never name one of your subdirectories `obj/' if you don't like surprises. If an `obj/' directory exists, BSD `make' will enter it before reading `Makefile'. Hence the `Makefile' in the current directory will not be read. % cat Makefile all: echo Hello % cat obj/Makefile all: echo World % make # GNU make echo Hello Hello % pmake # BSD make echo World World `make -k' Do not rely on the exit status of `make -k'. Some implementations reflect whether they encountered an error in their exit status; other implementations always succeed. % cat Makefile all: false % make -k; echo exit status: $? # GNU make false make: *** [all] Error 1 exit status: 2 % pmake -k; echo exit status: $? # BSD make false *** Error code 1 (continuing) exit status: 0 `VPATH' There is no `VPATH' support specified in POSIX. Many `make's have a form of `VPATH' support, but its implementation is not consistent amongst `make's. Maybe the best suggestion to give to people who need the `VPATH' feature is to choose a `make' implementation and stick to it. Since the resulting `Makefile's are not portable anyway, better choose a portable `make' (hint, hint). Here are a couple of known issues with some `VPATH' implementations. `VPATH' and double-colon rules Any assignment to `VPATH' causes Sun `make' to only execute the first set of double-colon rules. (This comment has been here since 1994 and the context has been lost. It's probably about SunOS 4. If you can reproduce this, please send us a test case for illustration.) `$<' in inference rules: One implementation of `make' would not prefix `$<' if this prerequisite has been found in a `VPATH' dir. This means that VPATH = ../src .c.o: cc -c $< -o $@ would run `cc -c foo.c -o foo.o', even if `foo.c' was actually found in `../src/'. This can be fixed as follows. VPATH = ../src .c.o: cc -c `test -f $< || echo ../src/`$< -o $@ This kludge was introduced in Automake in 2000, but the exact context have been lost. If you know which `make' implementation is involved here, please drop us a note. `$<' not supported in explicit rules As said elsewhere, using `$<' in explicit rules is not portable. The prerequisite file must be named explicitly in the rule. If you want to find the prerequisite via a `VPATH' search, you have to code the whole thing manually. For instance, using the same pattern as above: VPATH = ../src foo.o: foo.c cc -c `test -f foo.c || echo ../src/`foo.c -o foo.o Automatic rule rewriting Some `make' implementations, such as SunOS `make', will search prerequisites in `VPATH' and rewrite all their occurrences in the rule appropriately. For instance VPATH = ../src foo.o: foo.c cc -c foo.c -o foo.o would execute `cc -c ../src/foo.c -o foo.o' if `foo.c' was found in `../src'. That sounds great. However, for the sake of other `make' implementations, we can't rely on this, and we have to search `VPATH' manually: VPATH = ../src foo.o: foo.c cc -c `test -f foo.c || echo ../src/`foo.c -o foo.o However the "prerequisite rewriting" still applies here. So if `foo.c' is in `../src', SunOS `make' will execute `cc -c `test -f ../src/foo.c || echo ../src/`foo.c -o foo.o' which reduces to cc -c foo.c -o foo.o and thus fails. Oops. One workaround is to make sure that foo.c never appears as a plain word in the rule. For instance these three rules would be safe. VPATH = ../src foo.o: foo.c cc -c `test -f ./foo.c || echo ../src/`foo.c -o foo.o foo2.o: foo2.c cc -c `test -f 'foo2.c' || echo ../src/`foo2.c -o foo2.o foo3.o: foo3.c cc -c `test -f "foo3.c" || echo ../src/`foo3.c -o foo3.o Things get worse when your prerequisites are in a macro. VPATH = ../src HEADERS = foo.h foo2.h foo3.h install-HEADERS: $(HEADERS) for i in $(HEADERS); do \ $(INSTALL) -m 644 `test -f $$i || echo ../src/`$$i \ $(DESTDIR)$(includedir)/$$i; \ done The above `install-HEADERS' rule is not SunOS-proof because `for i in $(HEADERS);' will be expanded as `for i in foo.h foo2.h foo3.h;' where `foo.h' and `foo2.h' are plain words and are hence subject to `VPATH' adjustments. If the three files are in `../src', the rule is run as: for i in ../src/foo.h ../src/foo2.h foo3.h; do \ install -m 644 `test -f $i || echo ../src/`$i \ /usr/local/include/$i; \ done where the two first `install' calls will fail. For instance, consider the `foo.h' installation: install -m 644 `test -f ../src/foo.h || echo ../src/`../src/foo.h \ /usr/local/include/../src/foo.h; It reduces to: install -m 644 ../src/foo.h /usr/local/include/../src/foo.h; Note that the manual `VPATH' search did not cause any problems here; however this command installs `foo.h' in an incorrect directory. Trying to quote `$(HEADERS)' in some way, as we did for `foo.c' a few `Makefile's ago, does not help: install-HEADERS: $(HEADERS) headers='$(HEADERS)'; for i in $$headers; do \ $(INSTALL) -m 644 `test -f $$i || echo ../src/`$$i \ $(DESTDIR)$(includedir)/$$i; \ done Indeed, `headers='$(HEADERS)'' expands to `headers='foo.h foo2.h foo3.h'' where `foo2.h' is still a plain word. (Aside: the `headers='$(HEADERS)'; for i in $$headers;' idiom is a good idea if `$(HEADERS)' can be empty, because some shell produce a syntax error on `for i in;'.) One workaround is to strip this unwanted `../src/' prefix manually: VPATH = ../src HEADERS = foo.h foo2.h foo3.h install-HEADERS: $(HEADERS) headers='$(HEADERS)'; for i in $$headers; do \ i=`expr "$$i" : '../src/\(.*\)'`; $(INSTALL) -m 644 `test -f $$i || echo ../src/`$$i \ $(DESTDIR)$(includedir)/$$i; \ done OSF/Tru64 `make' creates prerequisite directories magically When a prerequisite is a sub-directory of `VPATH', Tru64 `make' will create it in the current directory. % mkdir -p foo/bar build % cd build % cat >Makefile < stamp-h Makefile: Makefile.in config.status ./config.status Makefile The calling convention of `config.status' has changed; see *Note Obsolete config.status Use::, for details. Obsolete Constructs ******************* Autoconf changes, and throughout the years some constructs have been obsoleted. Most of the changes involve the macros, but in some cases the tools themselves, or even some concepts, are now considered obsolete. You may completely skip this chapter if you are new to Autoconf. Its intention is mainly to help maintainers updating their packages by understanding how to move to more modern constructs. Obsolete `config.status' Invocation =================================== `config.status' now supports arguments to specify the files to instantiate; see *Note config.status Invocation::, for more details. Before, environment variables had to be used. - Variable: CONFIG_COMMANDS The tags of the commands to execute. The default is the arguments given to `AC_OUTPUT' and `AC_CONFIG_COMMANDS' in `configure.ac'. - Variable: CONFIG_FILES The files in which to perform `@VARIABLE@' substitutions. The default is the arguments given to `AC_OUTPUT' and `AC_CONFIG_FILES' in `configure.ac'. - Variable: CONFIG_HEADERS The files in which to substitute C `#define' statements. The default is the arguments given to `AC_CONFIG_HEADERS'; if that macro was not called, `config.status' ignores this variable. - Variable: CONFIG_LINKS The symbolic links to establish. The default is the arguments given to `AC_CONFIG_LINKS'; if that macro was not called, `config.status' ignores this variable. In *Note config.status Invocation::, using this old interface, the example would be: config.h: stamp-h stamp-h: config.h.in config.status CONFIG_COMMANDS= CONFIG_LINKS= CONFIG_FILES= \ CONFIG_HEADERS=config.h ./config.status echo > stamp-h Makefile: Makefile.in config.status CONFIG_COMMANDS= CONFIG_LINKS= CONFIG_HEADERS= \ CONFIG_FILES=Makefile ./config.status (If `configure.ac' does not call `AC_CONFIG_HEADERS', there is no need to set `CONFIG_HEADERS' in the `make' rules. Equally for `CONFIG_COMMANDS' etc.) `acconfig.h' ============ In order to produce `config.h.in', `autoheader' needs to build or to find templates for each symbol. Modern releases of Autoconf use `AH_VERBATIM' and `AH_TEMPLATE' (*note Autoheader Macros::), but in older releases a file, `acconfig.h', contained the list of needed templates. `autoheader' copied comments and `#define' and `#undef' statements from `acconfig.h' in the current directory, if present. This file used to be mandatory if you `AC_DEFINE' any additional symbols. Modern releases of Autoconf also provide `AH_TOP' and `AH_BOTTOM' if you need to prepend/append some information to `config.h.in'. Ancient versions of Autoconf had a similar feature: if `./acconfig.h' contains the string `@TOP@', `autoheader' copies the lines before the line containing `@TOP@' into the top of the file that it generates. Similarly, if `./acconfig.h' contains the string `@BOTTOM@', `autoheader' copies the lines after that line to the end of the file it generates. Either or both of those strings may be omitted. An even older alternate way to produce the same effect in ancient versions of Autoconf is to create the files `FILE.top' (typically `config.h.top') and/or `FILE.bot' in the current directory. If they exist, `autoheader' copies them to the beginning and end, respectively, of its output. In former versions of Autoconf, the files used in preparing a software package for distribution were: configure.ac --. .------> autoconf* -----> configure +---+ [aclocal.m4] --+ `---. [acsite.m4] ---' | +--> [autoheader*] -> [config.h.in] [acconfig.h] ----. | +-----' [config.h.top] --+ [config.h.bot] --' Using only the `AH_' macros, `configure.ac' should be self-contained, and should not depend upon `acconfig.h' etc. Using `autoupdate' to Modernize `configure.ac' ============================================== The `autoupdate' program updates a `configure.ac' file that calls Autoconf macros by their old names to use the current macro names. In version 2 of Autoconf, most of the macros were renamed to use a more uniform and descriptive naming scheme. *Note Macro Names::, for a description of the new scheme. Although the old names still work (*note Obsolete Macros::, for a list of the old macros and the corresponding new names), you can make your `configure.ac' files more readable and make it easier to use the current Autoconf documentation if you update them to use the new macro names. If given no arguments, `autoupdate' updates `configure.ac', backing up the original version with the suffix `~' (or the value of the environment variable `SIMPLE_BACKUP_SUFFIX', if that is set). If you give `autoupdate' an argument, it reads that file instead of `configure.ac' and writes the updated file to the standard output. `autoupdate' accepts the following options: `--help' `-h' Print a summary of the command line options and exit. `--version' `-V' Print the version number of Autoconf and exit. `--verbose' `-v' Report processing steps. `--debug' `-d' Don't remove the temporary files. `--force' `-f' Force the update even if the file has not changed. Disregard the cache. `--include=DIR' `-I DIR' Also look for input files in DIR. Multiple invocations accumulate. Directories are browsed from last to first. Obsolete Macros =============== Several macros are obsoleted in Autoconf, for various reasons (typically they failed to quote properly, couldn't be extended for more recent issues etc.). They are still supported, but deprecated: their use should be avoided. During the jump from Autoconf version 1 to version 2, most of the macros were renamed to use a more uniform and descriptive naming scheme, but their signature did not change. *Note Macro Names::, for a description of the new naming scheme. Below, if there is just the mapping from old names to new names for these macros, the reader is invited to refer to the definition of the new macro for the signature and the description. - Macro: AC_ALLOCA `AC_FUNC_ALLOCA' - Macro: AC_ARG_ARRAY removed because of limited usefulness - Macro: AC_C_CROSS This macro is obsolete; it does nothing. - Macro: AC_CANONICAL_SYSTEM Determine the system type and set output variables to the names of the canonical system types. *Note Canonicalizing::, for details about the variables this macro sets. The user is encouraged to use either `AC_CANONICAL_BUILD', or `AC_CANONICAL_HOST', or `AC_CANONICAL_TARGET', depending on the needs. Using `AC_CANONICAL_TARGET' is enough to run the two other macros. - Macro: AC_CHAR_UNSIGNED `AC_C_CHAR_UNSIGNED' - Macro: AC_CHECK_TYPE (TYPE, DEFAULT) Autoconf, up to 2.13, used to provide this version of `AC_CHECK_TYPE', deprecated because of its flaws. Firstly, although it is a member of the `CHECK' clan, singular sub-family, it does more than just checking. Secondly, missing types are not `typedef''d, they are `#define''d, which can lead to incompatible code in the case of pointer types. This use of `AC_CHECK_TYPE' is obsolete and discouraged; see *Note Generic Types::, for the description of the current macro. If the type TYPE is not defined, define it to be the C (or C++) builtin type DEFAULT, e.g., `short' or `unsigned'. This macro is equivalent to: AC_CHECK_TYPE([TYPE],, [AC_DEFINE_UNQUOTED([TYPE], [DEFAULT], [Define to `DEFAULT' if does not define.])]) In order to keep backward compatibility, the two versions of `AC_CHECK_TYPE' are implemented, selected by a simple heuristics: 1. If there are three or four arguments, the modern version is used. 2. If the second argument appears to be a C or C++ type, then the obsolete version is used. This happens if the argument is a C or C++ _builtin_ type or a C identifier ending in `_t', optionally followed by one of `[(* ' and then by a string of zero or more characters taken from the set `[]()* _a-zA-Z0-9'. 3. If the second argument is spelled with the alphabet of valid C and C++ types, the user is warned and the modern version is used. 4. Otherwise, the modern version is used. You are encouraged either to use a valid builtin type, or to use the equivalent modern code (see above), or better yet, to use `AC_CHECK_TYPES' together with #if !HAVE_LOFF_T typedef loff_t off_t; #endif - Macro: AC_CHECKING (FEATURE-DESCRIPTION) Same as `AC_MSG_NOTICE([checking FEATURE-DESCRIPTION...]'. - Macro: AC_COMPILE_CHECK (ECHO-TEXT, INCLUDES, FUNCTION-BODY, ACTION-IF-FOUND, [ACTION-IF-NOT-FOUND]) This is an obsolete version of `AC_TRY_COMPILE' itself replaced by `AC_COMPILE_IFELSE' (*note Running the Compiler::), with the addition that it prints `checking for ECHO-TEXT' to the standard output first, if ECHO-TEXT is non-empty. Use `AC_MSG_CHECKING' and `AC_MSG_RESULT' instead to print messages (*note Printing Messages::). - Macro: AC_CONST `AC_C_CONST' - Macro: AC_CROSS_CHECK Same as `AC_C_CROSS', which is obsolete too, and does nothing `:-)'. - Macro: AC_CYGWIN Check for the Cygwin environment in which case the shell variable `CYGWIN' is set to `yes'. Don't use this macro, the dignified means to check the nature of the host is using `AC_CANONICAL_HOST'. As a matter of fact this macro is defined as: AC_REQUIRE([AC_CANONICAL_HOST])[]dnl case $host_os in *cygwin* ) CYGWIN=yes;; * ) CYGWIN=no;; esac Beware that the variable `CYGWIN' has a very special meaning when running CygWin32, and should not be changed. That's yet another reason not to use this macro. - Macro: AC_DECL_SYS_SIGLIST Same as `AC_CHECK_DECLS([sys_siglist])'. - Macro: AC_DECL_YYTEXT Does nothing, now integrated in `AC_PROG_LEX'. - Macro: AC_DIR_HEADER Like calling `AC_FUNC_CLOSEDIR_VOID' and`AC_HEADER_DIRENT', but defines a different set of C preprocessor macros to indicate which header file is found: Header Old Symbol New Symbol `dirent.h' `DIRENT' `HAVE_DIRENT_H' `sys/ndir.h' `SYSNDIR' `HAVE_SYS_NDIR_H' `sys/dir.h' `SYSDIR' `HAVE_SYS_DIR_H' `ndir.h' `NDIR' `HAVE_NDIR_H' - Macro: AC_DYNIX_SEQ If on DYNIX/ptx, add `-lseq' to output variable `LIBS'. This macro used to be defined as AC_CHECK_LIB(seq, getmntent, LIBS="-lseq $LIBS") now it is just `AC_FUNC_GETMNTENT'. - Macro: AC_EXEEXT Defined the output variable `EXEEXT' based on the output of the compiler, which is now done automatically. Typically set to empty string if Unix and `.exe' if Win32 or OS/2. - Macro: AC_EMXOS2 Similar to `AC_CYGWIN' but checks for the EMX environment on OS/2 and sets `EMXOS2'. - Macro: AC_ERROR `AC_MSG_ERROR' - Macro: AC_FIND_X `AC_PATH_X' - Macro: AC_FIND_XTRA `AC_PATH_XTRA' - Macro: AC_FUNC_CHECK `AC_CHECK_FUNC' - Macro: AC_FUNC_WAIT3 If `wait3' is found and fills in the contents of its third argument (a `struct rusage *'), which HP-UX does not do, define `HAVE_WAIT3'. These days portable programs should use `waitpid', not `wait3', as `wait3' is being removed from the Open Group standards, and will not appear in the next revision of POSIX. - Macro: AC_GCC_TRADITIONAL `AC_PROG_GCC_TRADITIONAL' - Macro: AC_GETGROUPS_T `AC_TYPE_GETGROUPS' - Macro: AC_GETLOADAVG `AC_FUNC_GETLOADAVG' - Macro: AC_HAVE_FUNCS `AC_CHECK_FUNCS' - Macro: AC_HAVE_HEADERS `AC_CHECK_HEADERS' - Macro: AC_HAVE_LIBRARY (LIBRARY, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [OTHER-LIBRARIES]) This macro is equivalent to calling `AC_CHECK_LIB' with a FUNCTION argument of `main'. In addition, LIBRARY can be written as any of `foo', `-lfoo', or `libfoo.a'. In all of those cases, the compiler is passed `-lfoo'. However, LIBRARY cannot be a shell variable; it must be a literal name. - Macro: AC_HAVE_POUNDBANG `AC_SYS_INTERPRETER' (different calling convention) - Macro: AC_HEADER_CHECK `AC_CHECK_HEADER' - Macro: AC_HEADER_EGREP `AC_EGREP_HEADER' - Macro: AC_INIT (UNIQUE-FILE-IN-SOURCE-DIR) Formerly `AC_INIT' used to have a single argument, and was equivalent to: AC_INIT AC_CONFIG_SRCDIR(UNIQUE-FILE-IN-SOURCE-DIR) - Macro: AC_INLINE `AC_C_INLINE' - Macro: AC_INT_16_BITS If the C type `int' is 16 bits wide, define `INT_16_BITS'. Use `AC_CHECK_SIZEOF(int)' instead. - Macro: AC_IRIX_SUN If on IRIX (Silicon Graphics UNIX), add `-lsun' to output `LIBS'. If you were using it to get `getmntent', use `AC_FUNC_GETMNTENT' instead. If you used it for the NIS versions of the password and group functions, use `AC_CHECK_LIB(sun, getpwnam)'. Up to Autoconf 2.13, it used to be AC_CHECK_LIB(sun, getmntent, LIBS="-lsun $LIBS") now it is defined as AC_FUNC_GETMNTENT AC_CHECK_LIB(sun, getpwnam) - Macro: AC_LANG_C Same as `AC_LANG(C)'. - Macro: AC_LANG_CPLUSPLUS Same as `AC_LANG(C++)'. - Macro: AC_LANG_FORTRAN77 Same as `AC_LANG(Fortran 77)'. - Macro: AC_LANG_RESTORE Select the LANGUAGE that is saved on the top of the stack, as set by `AC_LANG_SAVE', remove it from the stack, and call `AC_LANG(LANGUAGE)'. - Macro: AC_LANG_SAVE Remember the current language (as set by `AC_LANG') on a stack. The current language does not change. `AC_LANG_PUSH' is preferred. - Macro: AC_LINK_FILES (SOURCE..., DEST...) This is an obsolete version of `AC_CONFIG_LINKS'. An updated version of: AC_LINK_FILES(config/$machine.h config/$obj_format.h, host.h object.h) is: AC_CONFIG_LINKS(host.h:config/$machine.h object.h:config/$obj_format.h) - Macro: AC_LN_S `AC_PROG_LN_S' - Macro: AC_LONG_64_BITS Define `LONG_64_BITS' if the C type `long int' is 64 bits wide. Use the generic macro `AC_CHECK_SIZEOF([long int])' instead. - Macro: AC_LONG_DOUBLE `AC_C_LONG_DOUBLE' - Macro: AC_LONG_FILE_NAMES `AC_SYS_LONG_FILE_NAMES' - Macro: AC_MAJOR_HEADER `AC_HEADER_MAJOR' - Macro: AC_MEMORY_H Used to define `NEED_MEMORY_H' if the `mem' functions were defined in `memory.h'. Today it is equivalent to `AC_CHECK_HEADERS(memory.h)'. Adjust your code to depend upon `HAVE_MEMORY_H', not `NEED_MEMORY_H'; see *Note Standard Symbols::. - Macro: AC_MINGW32 Similar to `AC_CYGWIN' but checks for the MingW32 compiler environment and sets `MINGW32'. - Macro: AC_MINUS_C_MINUS_O `AC_PROG_CC_C_O' - Macro: AC_MMAP `AC_FUNC_MMAP' - Macro: AC_MODE_T `AC_TYPE_MODE_T' - Macro: AC_OBJEXT Defined the output variable `OBJEXT' based on the output of the compiler, after .c files have been excluded. Typically set to `o' if Unix, `obj' if Win32. Now the compiler checking macros handle this automatically. - Macro: AC_OBSOLETE (THIS-MACRO-NAME, [SUGGESTION]) Make M4 print a message to the standard error output warning that THIS-MACRO-NAME is obsolete, and giving the file and line number where it was called. THIS-MACRO-NAME should be the name of the macro that is calling `AC_OBSOLETE'. If SUGGESTION is given, it is printed at the end of the warning message; for example, it can be a suggestion for what to use instead of THIS-MACRO-NAME. For instance AC_OBSOLETE([$0], [; use AC_CHECK_HEADERS(unistd.h) instead])dnl You are encouraged to use `AU_DEFUN' instead, since it gives better services to the user. - Macro: AC_OFF_T `AC_TYPE_OFF_T' - Macro: AC_OUTPUT ([FILE]..., [EXTRA-CMDS], [INIT-CMDS]) The use of `AC_OUTPUT' with argument is deprecated. This obsoleted interface is equivalent to: AC_CONFIG_FILES(FILE...) AC_CONFIG_COMMANDS([default], EXTRA-CMDS, INIT-CMDS) AC_OUTPUT - Macro: AC_OUTPUT_COMMANDS (EXTRA-CMDS, [INIT-CMDS]) Specify additional shell commands to run at the end of `config.status', and shell commands to initialize any variables from `configure'. This macro may be called multiple times. It is obsolete, replaced by `AC_CONFIG_COMMANDS'. Here is an unrealistic example: fubar=27 AC_OUTPUT_COMMANDS([echo this is extra $fubar, and so on.], [fubar=$fubar]) AC_OUTPUT_COMMANDS([echo this is another, extra, bit], [echo init bit]) Aside from the fact that `AC_CONFIG_COMMANDS' requires an additional key, an important difference is that `AC_OUTPUT_COMMANDS' is quoting its arguments twice, unlike `AC_CONFIG_COMMANDS'. This means that `AC_CONFIG_COMMANDS' can safely be given macro calls as arguments: AC_CONFIG_COMMANDS(foo, [my_FOO()]) Conversely, where one level of quoting was enough for literal strings with `AC_OUTPUT_COMMANDS', you need two with `AC_CONFIG_COMMANDS'. The following lines are equivalent: AC_OUTPUT_COMMANDS([echo "Square brackets: []"]) AC_CONFIG_COMMANDS([default], [[echo "Square brackets: []"]]) - Macro: AC_PID_T `AC_TYPE_PID_T' - Macro: AC_PREFIX `AC_PREFIX_PROGRAM' - Macro: AC_PROG_CC_STDC This macro has been integrated into `AC_PROG_CC'. - Macro: AC_PROGRAMS_CHECK `AC_CHECK_PROGS' - Macro: AC_PROGRAMS_PATH `AC_PATH_PROGS' - Macro: AC_PROGRAM_CHECK `AC_CHECK_PROG' - Macro: AC_PROGRAM_EGREP `AC_EGREP_CPP' - Macro: AC_PROGRAM_PATH `AC_PATH_PROG' - Macro: AC_REMOTE_TAPE removed because of limited usefulness - Macro: AC_RESTARTABLE_SYSCALLS `AC_SYS_RESTARTABLE_SYSCALLS' - Macro: AC_RETSIGTYPE `AC_TYPE_SIGNAL' - Macro: AC_RSH removed because of limited usefulness - Macro: AC_SCO_INTL If on SCO UNIX, add `-lintl' to output variable `LIBS'. This macro used to AC_CHECK_LIB(intl, strftime, LIBS="-lintl $LIBS") Now it just calls `AC_FUNC_STRFTIME' instead. - Macro: AC_SETVBUF_REVERSED `AC_FUNC_SETVBUF_REVERSED' - Macro: AC_SET_MAKE `AC_PROG_MAKE_SET' - Macro: AC_SIZEOF_TYPE `AC_CHECK_SIZEOF' - Macro: AC_SIZE_T `AC_TYPE_SIZE_T' - Macro: AC_STAT_MACROS_BROKEN `AC_HEADER_STAT' - Macro: AC_STDC_HEADERS `AC_HEADER_STDC' - Macro: AC_STRCOLL `AC_FUNC_STRCOLL' - Macro: AC_ST_BLKSIZE `AC_CHECK_MEMBERS' - Macro: AC_ST_BLOCKS `AC_STRUCT_ST_BLOCKS' - Macro: AC_ST_RDEV `AC_CHECK_MEMBERS' - Macro: AC_SYS_RESTARTABLE_SYSCALLS If the system automatically restarts a system call that is interrupted by a signal, define `HAVE_RESTARTABLE_SYSCALLS'. This macro does not check if system calls are restarted in general-it tests whether a signal handler installed with `signal' (but not `sigaction') causes system calls to be restarted. It does not test if system calls can be restarted when interrupted by signals that have no handler. These days portable programs should use `sigaction' with `SA_RESTART' if they want restartable system calls. They should not rely on `HAVE_RESTARTABLE_SYSCALLS', since nowadays whether a system call is restartable is a dynamic issue, not a configuration-time issue. - Macro: AC_SYS_SIGLIST_DECLARED `AC_DECL_SYS_SIGLIST' - Macro: AC_TEST_CPP `AC_TRY_CPP', replaced with `AC_PREPROC_IFELSE'. - Macro: AC_TEST_PROGRAM `AC_TRY_RUN', replaced with `AC_RUN_IFELSE'. - Macro: AC_TIMEZONE `AC_STRUCT_TIMEZONE' - Macro: AC_TIME_WITH_SYS_TIME `AC_HEADER_TIME' - Macro: AC_TRY_COMPILE (INCLUDES, FUNCTION-BODY, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) Same as `AC_COMPILE_IFELSE([AC_LANG_SOURCE([[INCLUDES]], [[FUNCTION-BODY]])], [ACTION-IF-TRUE], [ACTION-IF-FALSE])' (*note Running the Compiler::). This macro double quotes both INCLUDES and FUNCTION-BODY. For C and C++, INCLUDES is any `#include' statements needed by the code in FUNCTION-BODY (INCLUDES will be ignored if the currently selected language is Fortran 77). This macro also uses `CFLAGS' or `CXXFLAGS' if either C or C++ is the currently selected language, as well as `CPPFLAGS', when compiling. If Fortran 77 is the currently selected language then `FFLAGS' will be used when compiling. - Macro: AC_TRY_CPP (INPUT, [ACTION-IF-TRUE], [ACTION-IF-FALSE]) Same as `AC_PREPROC_IFELSE([AC_LANG_SOURCE([[INPUT]])], [ACTION-IF-TRUE], [ACTION-IF-FALSE])' (*note Running the Preprocessor::). This macro double quotes the INPUT. - Macro: AC_TRY_LINK (INCLUDES, FUNCTION-BODY, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) Same as `AC_LINK_IFELSE([AC_LANG_SOURCE([[INCLUDES]], [[FUNCTION-BODY]])], [ACTION-IF-TRUE], [ACTION-IF-FALSE])' (*note Running the Compiler::). This macro double quotes both INCLUDES and FUNCTION-BODY. Depending on the current language (*note Language Choice::), create a test program to see whether a function whose body consists of FUNCTION-BODY can be compiled and linked. If the file compiles and links successfully, run shell commands ACTION-IF-FOUND, otherwise run ACTION-IF-NOT-FOUND. This macro double quotes both INCLUDES and FUNCTION-BODY. For C and C++, INCLUDES is any `#include' statements needed by the code in FUNCTION-BODY (INCLUDES will be ignored if the currently selected language is Fortran 77). This macro also uses `CFLAGS' or `CXXFLAGS' if either C or C++ is the currently selected language, as well as `CPPFLAGS', when compiling. If Fortran 77 is the currently selected language then `FFLAGS' will be used when compiling. However, both `LDFLAGS' and `LIBS' will be used during linking in all cases. - Macro: AC_TRY_LINK_FUNC (FUNCTION, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) This macro is equivalent to `AC_LINK_IFELSE([AC_LANG_CALL([[INCLUDES]], [[FUNCTION-BODY]])], [ACTION-IF-TRUE], [ACTION-IF-FALSE])'. - Macro: AC_TRY_RUN (PROGRAM, [ACTION-IF-TRUE], [ACTION-IF-FALSE], [ACTION-IF-CROSS-COMPILING]) Same as `AC_RUN_IFELSE([AC_LANG_SOURCE([[PROGRAM]], [ACTION-IF-TRUE], [ACTION-IF-FALSE], [ACTION-IF-CROSS-COMPILING])' (*note Run Time::). - Macro: AC_UID_T `AC_TYPE_UID_T' - Macro: AC_UNISTD_H Same as `AC_CHECK_HEADERS(unistd.h)'. - Macro: AC_USG Define `USG' if the BSD string functions are defined in `strings.h'. You should no longer depend upon `USG', but on `HAVE_STRING_H'; see *Note Standard Symbols::. - Macro: AC_UTIME_NULL `AC_FUNC_UTIME_NULL' - Macro: AC_VALIDATE_CACHED_SYSTEM_TUPLE ([CMD]) If the cache file is inconsistent with the current host, target and build system types, it used to execute CMD or print a default error message. This is now handled by default. - Macro: AC_VERBOSE (RESULT-DESCRIPTION) `AC_MSG_RESULT'. - Macro: AC_VFORK `AC_FUNC_VFORK' - Macro: AC_VPRINTF `AC_FUNC_VPRINTF' - Macro: AC_WAIT3 `AC_FUNC_WAIT3' - Macro: AC_WARN `AC_MSG_WARN' - Macro: AC_WORDS_BIGENDIAN `AC_C_BIGENDIAN' - Macro: AC_XENIX_DIR This macro used to add `-lx' to output variable `LIBS' if on Xenix. Also, if `dirent.h' is being checked for, added `-ldir' to `LIBS'. Now it is merely an alias of `AC_HEADER_DIRENT' instead, plus some code to detect whether running XENIX on which you should not depend: AC_MSG_CHECKING([for Xenix]) AC_EGREP_CPP(yes, [#if defined M_XENIX && !defined M_UNIX yes #endif], [AC_MSG_RESULT([yes]); XENIX=yes], [AC_MSG_RESULT([no]); XENIX=]) - Macro: AC_YYTEXT_POINTER `AC_DECL_YYTEXT' Upgrading From Version 1 ======================== Autoconf version 2 is mostly backward compatible with version 1. However, it introduces better ways to do some things, and doesn't support some of the ugly things in version 1. So, depending on how sophisticated your `configure.ac' files are, you might have to do some manual work in order to upgrade to version 2. This chapter points out some problems to watch for when upgrading. Also, perhaps your `configure' scripts could benefit from some of the new features in version 2; the changes are summarized in the file `NEWS' in the Autoconf distribution. Changed File Names ------------------ If you have an `aclocal.m4' installed with Autoconf (as opposed to in a particular package's source directory), you must rename it to `acsite.m4'. *Note autoconf Invocation::. If you distribute `install.sh' with your package, rename it to `install-sh' so `make' builtin rules won't inadvertently create a file called `install' from it. `AC_PROG_INSTALL' looks for the script under both names, but it is best to use the new name. If you were using `config.h.top', `config.h.bot', or `acconfig.h', you still can, but you will have less clutter if you use the `AH_' macros. *Note Autoheader Macros::. Changed Makefiles ----------------- Add `@CFLAGS@', `@CPPFLAGS@', and `@LDFLAGS@' in your `Makefile.in' files, so they can take advantage of the values of those variables in the environment when `configure' is run. Doing this isn't necessary, but it's a convenience for users. Also add `@configure_input@' in a comment to each input file for `AC_OUTPUT', so that the output files will contain a comment saying they were produced by `configure'. Automatically selecting the right comment syntax for all the kinds of files that people call `AC_OUTPUT' on became too much work. Add `config.log' and `config.cache' to the list of files you remove in `distclean' targets. If you have the following in `Makefile.in': prefix = /usr/local exec_prefix = $(prefix) you must change it to: prefix = @prefix@ exec_prefix = @exec_prefix@ The old behavior of replacing those variables without `@' characters around them has been removed. Changed Macros -------------- Many of the macros were renamed in Autoconf version 2. You can still use the old names, but the new ones are clearer, and it's easier to find the documentation for them. *Note Obsolete Macros::, for a table showing the new names for the old macros. Use the `autoupdate' program to convert your `configure.ac' to using the new macro names. *Note autoupdate Invocation::. Some macros have been superseded by similar ones that do the job better, but are not call-compatible. If you get warnings about calling obsolete macros while running `autoconf', you may safely ignore them, but your `configure' script will generally work better if you follow the advice that is printed about what to replace the obsolete macros with. In particular, the mechanism for reporting the results of tests has changed. If you were using `echo' or `AC_VERBOSE' (perhaps via `AC_COMPILE_CHECK'), your `configure' script's output will look better if you switch to `AC_MSG_CHECKING' and `AC_MSG_RESULT'. *Note Printing Messages::. Those macros work best in conjunction with cache variables. *Note Caching Results::. Changed Results --------------- If you were checking the results of previous tests by examining the shell variable `DEFS', you need to switch to checking the values of the cache variables for those tests. `DEFS' no longer exists while `configure' is running; it is only created when generating output files. This difference from version 1 is because properly quoting the contents of that variable turned out to be too cumbersome and inefficient to do every time `AC_DEFINE' is called. *Note Cache Variable Names::. For example, here is a `configure.ac' fragment written for Autoconf version 1: AC_HAVE_FUNCS(syslog) case "$DEFS" in *-DHAVE_SYSLOG*) ;; *) # syslog is not in the default libraries. See if it's in some other. saved_LIBS="$LIBS" for lib in bsd socket inet; do AC_CHECKING(for syslog in -l$lib) LIBS="$saved_LIBS -l$lib" AC_HAVE_FUNCS(syslog) case "$DEFS" in *-DHAVE_SYSLOG*) break ;; *) ;; esac LIBS="$saved_LIBS" done ;; esac Here is a way to write it for version 2: AC_CHECK_FUNCS(syslog) if test $ac_cv_func_syslog = no; then # syslog is not in the default libraries. See if it's in some other. for lib in bsd socket inet; do AC_CHECK_LIB($lib, syslog, [AC_DEFINE(HAVE_SYSLOG) LIBS="$LIBS -l$lib"; break]) done fi If you were working around bugs in `AC_DEFINE_UNQUOTED' by adding backslashes before quotes, you need to remove them. It now works predictably, and does not treat quotes (except back quotes) specially. *Note Setting Output Variables::. All of the Boolean shell variables set by Autoconf macros now use `yes' for the true value. Most of them use `no' for false, though for backward compatibility some use the empty string instead. If you were relying on a shell variable being set to something like 1 or `t' for true, you need to change your tests. Changed Macro Writing --------------------- When defining your own macros, you should now use `AC_DEFUN' instead of `define'. `AC_DEFUN' automatically calls `AC_PROVIDE' and ensures that macros called via `AC_REQUIRE' do not interrupt other macros, to prevent nested `checking...' messages on the screen. There's no actual harm in continuing to use the older way, but it's less convenient and attractive. *Note Macro Definitions::. You probably looked at the macros that came with Autoconf as a guide for how to do things. It would be a good idea to take a look at the new versions of them, as the style is somewhat improved and they take advantage of some new features. If you were doing tricky things with undocumented Autoconf internals (macros, variables, diversions), check whether you need to change anything to account for changes that have been made. Perhaps you can even use an officially supported technique in version 2 instead of kludging. Or perhaps not. To speed up your locally written feature tests, add caching to them. See whether any of your tests are of general enough usefulness to encapsulate them into macros that you can share. Upgrading From Version 2.13 =========================== The introduction of the previous section (*note Autoconf 1::) perfectly suits this section.... Autoconf version 2.50 is mostly backward compatible with version 2.13. However, it introduces better ways to do some things, and doesn't support some of the ugly things in version 2.13. So, depending on how sophisticated your `configure.ac' files are, you might have to do some manual work in order to upgrade to version 2.50. This chapter points out some problems to watch for when upgrading. Also, perhaps your `configure' scripts could benefit from some of the new features in version 2.50; the changes are summarized in the file `NEWS' in the Autoconf distribution. Changed Quotation ----------------- The most important changes are invisible to you: the implementation of most macros have completely changed. This allowed more factorization of the code, better error messages, a higher uniformity of the user's interface etc. Unfortunately, as a side effect, some construct which used to (miraculously) work might break starting with Autoconf 2.50. The most common culprit is bad quotation. For instance, in the following example, the message is not properly quoted: AC_INIT AC_CHECK_HEADERS(foo.h,, AC_MSG_ERROR(cannot find foo.h, bailing out)) AC_OUTPUT Autoconf 2.13 simply ignores it: $ autoconf-2.13; ./configure --silent creating cache ./config.cache configure: error: cannot find foo.h $ while Autoconf 2.50 will produce a broken `configure': $ autoconf-2.50; ./configure --silent configure: error: cannot find foo.h ./configure: exit: bad non-numeric arg `bailing' ./configure: exit: bad non-numeric arg `bailing' $ The message needs to be quoted, and the `AC_MSG_ERROR' invocation too! AC_INIT AC_CHECK_HEADERS(foo.h,, [AC_MSG_ERROR([cannot find foo.h, bailing out])]) AC_OUTPUT Many many (and many more) Autoconf macros were lacking proper quotation, including no less than... `AC_DEFUN' itself! $ cat configure.in AC_DEFUN([AC_PROG_INSTALL], [# My own much better version ]) AC_INIT AC_PROG_INSTALL AC_OUTPUT $ autoconf-2.13 autoconf: Undefined macros: ***BUG in Autoconf--please report*** AC_FD_MSG ***BUG in Autoconf--please report*** AC_EPI configure.in:1:AC_DEFUN([AC_PROG_INSTALL], configure.in:5:AC_PROG_INSTALL $ autoconf-2.50 $ New Macros ---------- Because Autoconf has been dormant for years, Automake provided Autoconf-like macros for a while. Autoconf 2.50 now provides better versions of these macros, integrated in the `AC_' namespace, instead of `AM_'. But in order to ease the upgrading via `autoupdate', bindings to such `AM_' macros are provided. Unfortunately Automake did not quote the names of these macros! Therefore, when `m4' finds something like `AC_DEFUN(AM_TYPE_PTRDIFF_T, ...)' in `aclocal.m4', `AM_TYPE_PTRDIFF_T' is expanded, replaced with its Autoconf definition. Fortunately Autoconf catches pre-`AC_INIT' expansions, and will complain, in its own words: $ cat configure.in AC_INIT AM_TYPE_PTRDIFF_T $ aclocal-1.4 $ autoconf ./aclocal.m4:17: error: m4_defn: undefined macro: _m4_divert_diversion actypes.m4:289: AM_TYPE_PTRDIFF_T is expanded from... ./aclocal.m4:17: the top level $ Future versions of Automake will simply no longer define most of these macros, and will properly quote the names of the remaining macros. But you don't have to wait for it to happen to do the right thing right now: do not depend upon macros from Automake as it is simply not its job to provide macros (but the one it requires itself): $ cat configure.in AC_INIT AM_TYPE_PTRDIFF_T $ rm aclocal.m4 $ autoupdate autoupdate: `configure.in' is updated $ cat configure.in AC_INIT AC_CHECK_TYPES([ptrdiff_t]) $ aclocal-1.4 $ autoconf $ Hosts and Cross-Compilation --------------------------- Based on the experience of compiler writers, and after long public debates, many aspects of the cross-compilation chain have changed: - the relationship between the build, host, and target architecture types, - the command line interface for specifying them to `configure', - the variables defined in `configure', - the enabling of cross-compilation mode. The relationship between build, host, and target have been cleaned up: the chain of default is now simply: target defaults to host, host to build, and build to the result of `config.guess'. Nevertheless, in order to ease the transition from 2.13 to 2.50, the following transition scheme is implemented. _Do not rely on it_, as it will be completely disabled in a couple of releases (we cannot keep it, as it proves to cause more problems than it cures). They all default to the result of running `config.guess', unless you specify either `--build' or `--host'. In this case, the default becomes the system type you specified. If you specify both, and they're different, `configure' will enter cross compilation mode, so it won't run any tests that require execution. Hint: if you mean to override the result of `config.guess', prefer `--build' over `--host'. In the future, `--host' will not override the name of the build system type. Whenever you specify `--host', be sure to specify `--build' too. For backward compatibility, `configure' will accept a system type as an option by itself. Such an option will override the defaults for build, host, and target system types. The following configure statement will configure a cross toolchain that will run on NetBSD/alpha but generate code for GNU Hurd/sparc, which is also the build platform. ./configure --host=alpha-netbsd sparc-gnu In Autoconf 2.13 and before, the variables `build', `host', and `target' had a different semantics before and after the invocation of `AC_CANONICAL_BUILD' etc. Now, the argument of `--build' is strictly copied into `build_alias', and is left empty otherwise. After the `AC_CANONICAL_BUILD', `build' is set to the canonicalized build type. To ease the transition, before, its contents is the same as that of `build_alias'. Do _not_ rely on this broken feature. For consistency with the backward compatibility scheme exposed above, when `--host' is specified but `--build' isn't, the build system will be assumed to be the same as `--host', and `build_alias' will be set to that value. Eventually, this historically incorrect behavior will go away. The former scheme to enable cross-compilation proved to cause more harm than good, in particular, it used to be triggered too easily, leaving regular end users puzzled in front of cryptic error messages. `configure' could even enter cross-compilation mode only because the compiler was not functional. This is mainly because `configure' used to try to detect cross-compilation, instead of waiting for an explicit flag from the user. Now, `configure' enters cross-compilation mode if and only if `--host' is passed. That's the short documentation. To ease the transition between 2.13 and its successors, a more complicated scheme is implemented. _Do not rely on the following_, as it will be removed in the near future. If you specify `--host', but not `--build', when `configure' performs the first compiler test it will try to run an executable produced by the compiler. If the execution fails, it will enter cross-compilation mode. This is fragile. Moreover, by the time the compiler test is performed, it may be too late to modify the build-system type: other tests may have already been performed. Therefore, whenever you specify `--host', be sure to specify `--build' too. ./configure --build=i686-pc-linux-gnu --host=m68k-coff will enter cross-compilation mode. The former interface, which consisted in setting the compiler to a cross-compiler without informing `configure' is obsolete. For instance, `configure' will fail if it can't run the code generated by the specified compiler if you configure as follows: ./configure CC=m68k-coff-gcc `AC_LIBOBJ' vs. `LIBOBJS' ------------------------- Up to Autoconf 2.13, the replacement of functions was triggered via the variable `LIBOBJS'. Since Autoconf 2.50, the macro `AC_LIBOBJ' should be used instead (*note Generic Functions::). Starting at Autoconf 2.53, the use of `LIBOBJS' is an error. This change is mandated by the unification of the GNU Build System components. In particular, the various fragile techniques used to parse a `configure.ac' are all replaced with the use of traces. As a consequence, any action must be traceable, which obsoletes critical variable assignments. Fortunately, `LIBOBJS' was the only problem, and it can even be handled gracefully (read, "without your having to change something"). There were two typical uses of `LIBOBJS': asking for a replacement function, and adjusting `LIBOBJS' for Automake and/or Libtool. As for function replacement, the fix is immediate: use `AC_LIBOBJ'. For instance: LIBOBJS="$LIBOBJS fnmatch.o" LIBOBJS="$LIBOBJS malloc.$ac_objext" should be replaced with: AC_LIBOBJ([fnmatch]) AC_LIBOBJ([malloc]) When asked for automatic de-ANSI-fication, Automake needs `LIBOBJS''ed filenames to have `$U' appended to the base names. Libtool requires the definition of `LTLIBOBJS', whose suffixes are mapped to `.lo'. People used to run snippets such as: # This is necessary so that .o files in LIBOBJS are also built via # the ANSI2KNR-filtering rules. LIBOBJS=`echo "$LIBOBJS" | sed 's/\.o /\$U.o /g;s/\.o$/\$U.o/'` LTLIBOBJS=`echo "$LIBOBJS" | sed 's/\.o/\.lo/g'` AC_SUBST(LTLIBOBJS) Note that this code is _wrong_, because `.o' is not the only possible extension(1)! It should have read: # This is necessary so that .o files in LIBOBJS are also built via # the ANSI2KNR-filtering rules. LIB@&t@OBJS=`echo "$LIB@&t@OBJS" | sed 's,\.[[^.]]* ,$U&,g;s,\.[[^.]]*$,$U&,'` LTLIBOBJS=`echo "$LIB@&t@OBJS" | sed 's,\.[[^.]]* ,.lo ,g;s,\.[[^.]]*$,.lo,'` AC_SUBST(LTLIBOBJS) You no longer have to use this: `AC_OUTPUT' normalizes `LIBOBJS' and `LTLIBOBJS' (hence it works with any version of Automake and Libtool). Just remove these lines (`autoupdate' cannot handle this task, since this is not a macro). Note that `U' must not be used in your Makefiles. ---------- Footnotes ---------- (1) Yet another reason why assigning `LIBOBJS' directly is discouraged. `AC_FOO_IFELSE' vs. `AC_TRY_FOO' -------------------------------- Since Autoconf 2.50, internal codes uses `AC_PREPROC_IFELSE', `AC_COMPILE_IFELSE', `AC_LINK_IFELSE', and `AC_RUN_IFELSE' on the other one hand and `AC_LANG_SOURCES', and `AC_LANG_PROGRAM' on the other hand instead of the deprecated `AC_TRY_CPP', `AC_TRY_COMPILE', `AC_TRY_LINK', and `AC_TRY_RUN'. The motivations where: - a more consistent interface: `AC_TRY_COMPILE' etc. were double quoting their arguments; - the combinatoric explosion is solved by decomposing on the one hand the generation of sources, and on the other hand executing the program; - this scheme helps supporting more languages than plain C and C++. In addition to the change of syntax, the philosphy has changed too: while emphasis was put on speed at the expense of accuracy, today's Autoconf promotes accuracy of the testing framework at, ahem..., the expense of speed. As a perfect example of what is _not_ to be done, here is how to find out whether a header file contains a particular declaration, such as a typedef, a structure, a structure member, or a function. Use `AC_EGREP_HEADER' instead of running `grep' directly on the header file; on some systems the symbol might be defined in another header file that the file you are checking `#include's. As a (bad) example, here is how you should not check for C preprocessor symbols, either defined by header files or predefined by the C preprocessor: using `AC_EGREP_CPP': AC_EGREP_CPP(yes, [#ifdef _AIX yes #endif ], is_aix=yes, is_aix=no) The above example, properly written would (i) use `AC_LANG_PROGRAM', and (ii) run the compiler: AC_COMPILE_IFELSE([AC_LANG_PROGRAM( [[#if !defined _AIX # error _AIX not defined #endif ]])], [is_aix=yes], [is_aix=no]) Generating Test Suites with Autotest ************************************ *Note: This section describes an experimental feature which will be part of Autoconf in a forthcoming release. Although we believe Autotest is stabilizing, this documentation describes an interface which might change in the future: do not depend upon Autotest without subscribing to the Autoconf mailing lists.* It is paradoxical that portable projects depend on nonportable tools to run their test suite. Autoconf by itself is the paragon of this problem: although it aims at perfectly portability, up to 2.13, its test suite was using DejaGNU, a rich and complex testing framework, but which is far from being standard on Unix systems. Worse yet, it was likely to be missing on the most fragile platforms, the very platforms that are most likely to torture Autoconf and exhibit deficiencies. To circumvent this problem many package maintainers have developed their own testing framework, based on simple shell scripts whose sole output are their exit status: the test succeeded, or failed. In addition, most of these tests share some common patterns, what results in lots of duplicated code, tedious maintenance etc. Following exactly the same reasoning that yielded to the inception of Autoconf, Autotest provides a test suite generation frame work, based on M4 macros, building a portable shell script. The suite itself is equipped with automatic logging and tracing facilities which greatly diminish the interaction with bug reporters, and simple timing reports. Autoconf itself has been using Autotest for years, and we do attest that it has considerably improved the strength of the test suite, and the quality of bug reports. Other projects are known to use some generation of Autotest, such as Bison, Free Recode, Free Wdiff, GNU Tar, each of them having different needs, what slowly polishes Autotest as a general testing framework. Nonetheless, compared to DejaGNU, Autotest is inadequate for interactive tool testing, which is probably its main limitation. Using an Autotest Test Suite ============================ `testsuite' Scripts ------------------- Generating testing or validation suites using Autotest is rather easy. The whole validation suite is held in a file to be processed through `autom4te', itself using GNU M4 under the scene, to produce a stand-alone Bourne shell script which then gets distributed. Neither `autom4te' nor GNU M4 are not needed anymore at the installer end. Each test of the validation suite should be part of some test group. A "test group" is a sequence of interwoven tests that ought to be executed together, usually because one test in the group creates data files than a later test in the same group needs to read. Complex test groups make later debugging more tedious. It is much better keeping keep only a few tests per test group, and if you can put only one test per test group, this is just ideal. For all but the simplest packages, some file such as `testsuite.at' does not fully hold all test sources, as these are often easier to maintain in separate files. Each of these separate files holds a single test group, or a sequence of test groups all addressing some common functionality in the package. In such cases, file `testsuite.at' only initializes the whole validation suite, and sometimes do elementary health checking, before listing include statements for all other test files. The special file `package.m4', containing the identification of the package, is automatically included if found. The validation scripts that Autotest produces are by convention called `testsuite'. When run, `testsuite' executes each test group in turn, producing only one summary line per test to say if that particular test succeeded or failed. At end of all tests, summarizing counters get printed. If any test failed, one debugging script gets automatically generated for each test group which failed. These debugging scripts are named `testsuite.NN', where NN is the sequence number of the test group. In the ideal situation, none of the tests fail, and consequently, no debugging script is generated out of validation. The automatic generation of debugging scripts for failed test has the purpose of easing the chase for bugs. It often happens in practice that individual tests in the validation suite need to get information coming out of the configuration process. Some of this information, common for all validation suites, is provided through the file `atconfig', automatically created by `AC_CONFIG_TESTDIR'. For configuration informations which your testing environment specifically needs, you might prepare an optional file named `atlocal.in', instantiated by `AC_CONFIG_FILES'. The configuration process produces `atconfig' and `atlocal' out of these two input files, and these two produced files are automatically read by the `testsuite' script. Here is a diagram showing the relationship between files. Files used in preparing a software package for distribution: subfile-1.at ->. ... \ subfile-i.at ---->-- testsuite.at -->. ... / \ subfile-n.at ->' >-- autom4te* -->testsuite / [package.m4] ->' Files used in configuring a software package: .--> atconfig / [atlocal.in] --> config.status* --< \ `--> [atlocal] Files created during the test suite execution: atconfig -->. .--> testsuite.log \ / >-- testsuite* --< / \ [atlocal] ->' `--> [testsuite.NN*] Autotest Logs ------------- When run, the test suite creates a log file named after itself, e.g., a test suite named `testsuite' creates `testsuite.log'. It contains a lot of information, usually more than maintainers actually need, but therefore most of the time it contains all that is needed: command line arguments A very bad Unix habit which is unfortunately wide spread consists of setting environment variables before the command, such as in `CC=my-home-grown-cc ./testsuite'. This results in the test suite not knowing this change, hence (i) it can't report it to you, and (ii) it cannot preserve the value of `CC' for subsequent runs(1). Autoconf faced exactly the same problem, and solved it by asking users to pass the variable definitions as command line arguments. Autotest requires this rule too, but has no means to enforce it; the log then contains a trace of the variables the user changed. `ChangeLog' excerpts The topmost lines of all the `ChangeLog's found in the source hierarchy. This is especially useful when bugs are reported against development versions of the package, since the version string does not provide sufficient information to know the exact state of the sources the user compiled. Of course this relies on the use of a `ChangeLog'. build machine Running a test suite in a cross-compile environment is not an easy task, since it would mean having the test suite run on a machine BUILD, while running programs on a machine HOST. It is much simpler to run both the test suite and the programs on HOST, but then, from the point of view of the test suite, there remains a single environment, HOST = BUILD. The log contains relevant information on the state of the build machine, including some important environment variables. tested programs The absolute path and answers to `--version' of the tested programs (see *Note Writing testsuite.at::, `AT_TESTED'). configuration log The contents of `config.log', as created by `configure', are appended. It contains the configuration flags and a detailed report on the configuration itself. ---------- Footnotes ---------- (1) When a failure occurs, the test suite is rerun, verbosely, and the user is asked to "play" with this failure to provide better information. It is important to keep the same environment between the first run, and bug-tracking runs. Writing `testsuite.at' ====================== The `testsuite.at' is a Bourne shell script making use of special Autotest M4 macros. It often contains a call to `AT_INIT' nears its beginning followed by one call to `m4_include' per source file for tests. Each such included file, or the remainder of `testsuite.at' if include files are not used, contain a sequence of test groups. Each test group begins with one call to `AT_SETUP', it contains an arbitrary number of shell commands or calls to `AT_CHECK', and it completes with one call to `AT_CLEANUP'. - Macro: AT_INIT ([NAME]) Initialize Autotest. Giving a NAME to the test suite is encouraged if your package includes several test suites. In any case, the test suite always displays the package name and version. It also inherits the package bug report address. - Macro: AT_TESTED (EXECUTABLES) Log the path and answer to `--version' of each program in space-separated list EXECUTABLES. Several invocations register new executables, in other words, don't fear registering one program several times. Autotest test suites rely on the `PATH' to find the tested program. This saves from generating the absolute paths to the various tools, and makes it possible to test installed programs. Therefore, knowing what programs are being exercised is crucial to understand some problems in the test suite itself, or its occasional misuses. It is a good idea to also subscribe foreign programs you depend upon, to ease incompatibility diagnostics. - Macro: AT_SETUP (TEST-GROUP-NAME) This macro starts a group of related tests, all to be executed in the same subshell. It accepts a single argument, which holds a few words (no more than about 30 or 40 characters) quickly describing the purpose of the test group being started. - Macro: AT_KEYWORDS (KEYWORDS) Associate the space-separated list of KEYWORDS to the enclosing test group. This makes it possible to run "slices" of the test suite. For instance if some of your test groups exercise some `foo' feature, then using `AT_KEYWORDS(foo)' lets you run `./testsuite -k foo' to run exclusively these test groups. The TITLE of the test group is automatically recorded to `AT_KEYWORDS'. Several invocations within a test group accumulate new keywords. In other words, don't fear registering several times the same keyword in a test group. - Macro: AT_CLEANUP End the current test group. - Macro: AT_DATA (FILE, CONTENTS) Initialize an input data FILE with given CONTENTS. Of course, the CONTENTS have to be properly quoted between square brackets to protect against included commas or spurious M4 expansion. The contents ought to end with an end of line. - Macro: AT_CHECK (COMMANDS, [STATUS = ``0''], [STDOUT], [STDERR]) Execute a test by performing given shell COMMANDS. These commands should normally exit with STATUS, while producing expected STDOUT and STDERR contents. If COMMANDS exit with status 77, then the whole test group is skipped. The COMMANDS _must not_ redirect the standard output, nor the standard error. If STATUS, or STDOUT, or STDERR is `ignore', then the corresponding value is not checked. The special value `expout' for STDOUT means the expected output of the COMMANDS is the content of the file `expout'. If STDOUT is `stdout', then the standard output of the COMMANDS is available for further tests in the file `stdout'. Similarly for STDERR with `expout' and `stderr'. Running `testsuite' Scripts =========================== Autotest test suites support the following arguments: `--help' `-h' Display the list of options and exit successfully. `--version' `-V' Display the version of the test suite and exit successfully. `--clean' `-c' Remove all the files the test suite might have created and exit. Meant for `clean' Makefile targets. `--list' `-l' List all the tests (or only the selection), including their possible keywords. By default all the tests are performed (or described with `--list') in the default environment first silently, then verbosely, but the environment, set of tests, and verbosity level can be tuned: `VARIABLE=VALUE' Set the environment VARIABLE to VALUE. Do not run `FOO=foo ./testsuite' as debugging scripts would then run in a different environment. The variable `AUTOTEST_PATH' specifies the testing path to prepend to `PATH'. It handles specially relative paths (not starting with `/'): they are considered to be relative to the top level of the package being built. All the directories are made absolute, first starting from the top level _build_ tree, then from the _source_ tree. For instance `./testsuite AUTOTEST_PATH=tests:bin' for a `/src/foo-1.0' source package built in `/tmp/foo' results in `/tmp/foo/tests:/tmp/foo/bin' and then `/src/foo-1.0/tests:/src/foo-1.0/bin' being prepended to `PATH'. `NUMBER' `NUMBER-NUMBER' `NUMBER-' `-NUMBER' Add the corresponding test groups, with obvious semantics, to the selection. `--keywords=KEYWORDS' `-k KEYWORDS' Add to the selection the test groups which title or keywords (arguments to `AT_SETUP' or `AT_KEYWORDS') match _all_ the keywords of the comma separated list KEYWORDS. Running `./testsuite -k autoupdate,FUNC' will select all the tests tagged with `autoupdate' _and_ `FUNC' (as in `AC_CHECK_FUNC', `AC_FUNC_FNMATCH' etc.) while `./testsuite -k autoupdate -k FUNC' runs all the tests tagged with `autoupdate' _or_ `FUNC'. `--errexit' `-e' If any test fails, immediately abort testing. It implies `--debug': post test group clean up, debugging script generation, and logging are inhibited. This option is meant for the full test suite, it is not really useful for generated debugging scripts. `--verbose' `-v' Force more verbosity in the detailed output of what is being done. This is the default for debugging scripts. `--debug' `-d' Do not remove the files after a test group was performed --but they are still removed _before_, therefore using this option is sane when running several test groups. Do not create debugging scripts. Do not log (in order to preserve supposedly existing full log file). This is the default for debugging scripts. `--trace' `-x' Trigger shell tracing of the test groups. Making `testsuite' Scripts ========================== For putting Autotest into movement, you need some configuration and Makefile machinery. We recommend, at least if your package uses deep or shallow hierarchies, that you use `tests/' as the name of the directory holding all your tests and their `Makefile'. Here is a check list of things to do. - Make sure to create the file `package.m4', which defines the identity of the package. It must define `AT_PACKAGE_STRING', the full signature of the package, and `AT_PACKAGE_BUGREPORT', the address to which bug reports should be sent. For sake of completeness, we suggest that you also define `AT_PACKAGE_NAME', `AT_PACKAGE_TARNAME', and `AT_PACKAGE_VERSION'. *Note Initializing configure::, for a description of these variables. We suggest the following Makefile excerpt: $(srcdir)/package.m4: $(top_srcdir)/configure.ac { \ echo '# Signature of the current package.'; \ echo 'm4_define([AT_PACKAGE_NAME], [@PACKAGE_NAME@])'; \ echo 'm4_define([AT_PACKAGE_TARNAME], [@PACKAGE_TARNAME@])'; \ echo 'm4_define([AT_PACKAGE_VERSION], [@PACKAGE_VERSION@])'; \ echo 'm4_define([AT_PACKAGE_STRING], [@PACKAGE_STRING@])'; \ echo 'm4_define([AT_PACKAGE_BUGREPORT], [@PACKAGE_BUGREPORT@])'; \ } >$(srcdir)/package.m4 Be sure to distribute `package.m4' and to put it into the source hierarchy: the test suite ought to be shipped! - Invoke `AC_CONFIG_TESTDIR'. - Macro: AC_CONFIG_TESTDIR (DIRECTORY, [TEST-PATH = `DIRECTORY']) An Autotest test suite is to be configured in DIRECTORY. This macro requires the instantiation of `DIRECTORY/atconfig' from `DIRECTORY/atconfig.in', and sets the default `AUTOTEST_PATH' to TEST-PATH (*note testsuite Invocation::). - Still within `configure.ac', as appropriate, ensure that some `AC_CONFIG_FILES' command includes substitution for `tests/atlocal'. - The `tests/Makefile.in' should be modified so the validation in your package is triggered by `make check'. An example is provided below. With Automake, here is a minimal example about how to link `make check' with a validation suite. EXTRA_DIST = testsuite.at testsuite TESTSUITE = $(srcdir)/testsuite check-local: atconfig atlocal $(TESTSUITE) $(SHELL) $(TESTSUITE) AUTOTEST = $(AUTOM4TE) --language=autotest $(TESTSUITE): $(srcdir)/testsuite.at $(AUTOTEST) -I $(srcdir) $@.at -o $@.tmp mv $@.tmp $@ You might want to list explicitly the dependencies, i.e., the list of the files `testsuite.at' includes. With strict Autoconf, you might need to add lines inspired from the following: subdir = tests atconfig: $(top_builddir)/config.status cd $(top_builddir) && \ $(SHELL) ./config.status $(subdir)/$@ atlocal: $(srcdir)/atlocal.in $(top_builddir)/config.status cd $(top_builddir) && \ $(SHELL) ./config.status $(subdir)/$@ and manage to have `atconfig.in' and `$(EXTRA_DIST)' distributed. Frequent Autoconf Questions, with answers ***************************************** Several questions about Autoconf come up occasionally. Here some of them are addressed. Distributing `configure' Scripts ================================ What are the restrictions on distributing `configure' scripts that Autoconf generates? How does that affect my programs that use them? There are no restrictions on how the configuration scripts that Autoconf produces may be distributed or used. In Autoconf version 1, they were covered by the GNU General Public License. We still encourage software authors to distribute their work under terms like those of the GPL, but doing so is not required to use Autoconf. Of the other files that might be used with `configure', `config.h.in' is under whatever copyright you use for your `configure.ac'. `config.sub' and `config.guess' have an exception to the GPL when they are used with an Autoconf-generated `configure' script, which permits you to distribute them under the same terms as the rest of your package. `install-sh' is from the X Consortium and is not copyrighted. Why Require GNU M4? =================== Why does Autoconf require GNU M4? Many M4 implementations have hard-coded limitations on the size and number of macros that Autoconf exceeds. They also lack several builtin macros that it would be difficult to get along without in a sophisticated application like Autoconf, including: m4_builtin m4_indir m4_bpatsubst __file__ __line__ Autoconf requires version 1.4 or above of GNU M4 because it uses frozen state files. Since only software maintainers need to use Autoconf, and since GNU M4 is simple to configure and install, it seems reasonable to require GNU M4 to be installed also. Many maintainers of GNU and other free software already have most of the GNU utilities installed, since they prefer them. How Can I Bootstrap? ==================== If Autoconf requires GNU M4 and GNU M4 has an Autoconf `configure' script, how do I bootstrap? It seems like a chicken and egg problem! This is a misunderstanding. Although GNU M4 does come with a `configure' script produced by Autoconf, Autoconf is not required in order to run the script and install GNU M4. Autoconf is only required if you want to change the M4 `configure' script, which few people have to do (mainly its maintainer). Why Not Imake? ============== Why not use Imake instead of `configure' scripts? Several people have written addressing this question, so I include adaptations of their explanations here. The following answer is based on one written by Richard Pixley: Autoconf generated scripts frequently work on machines that it has never been set up to handle before. That is, it does a good job of inferring a configuration for a new system. Imake cannot do this. Imake uses a common database of host specific data. For X11, this makes sense because the distribution is made as a collection of tools, by one central authority who has control over the database. GNU tools are not released this way. Each GNU tool has a maintainer; these maintainers are scattered across the world. Using a common database would be a maintenance nightmare. Autoconf may appear to be this kind of database, but in fact it is not. Instead of listing host dependencies, it lists program requirements. If you view the GNU suite as a collection of native tools, then the problems are similar. But the GNU development tools can be configured as cross tools in almost any host+target permutation. All of these configurations can be installed concurrently. They can even be configured to share host independent files across hosts. Imake doesn't address these issues. Imake templates are a form of standardization. The GNU coding standards address the same issues without necessarily imposing the same restrictions. Here is some further explanation, written by Per Bothner: One of the advantages of Imake is that it easy to generate large Makefiles using `cpp''s `#include' and macro mechanisms. However, `cpp' is not programmable: it has limited conditional facilities, and no looping. And `cpp' cannot inspect its environment. All of these problems are solved by using `sh' instead of `cpp'. The shell is fully programmable, has macro substitution, can execute (or source) other shell scripts, and can inspect its environment. Paul Eggert elaborates more: With Autoconf, installers need not assume that Imake itself is already installed and working well. This may not seem like much of an advantage to people who are accustomed to Imake. But on many hosts Imake is not installed or the default installation is not working well, and requiring Imake to install a package hinders the acceptance of that package on those hosts. For example, the Imake template and configuration files might not be installed properly on a host, or the Imake build procedure might wrongly assume that all source files are in one big directory tree, or the Imake configuration might assume one compiler whereas the package or the installer needs to use another, or there might be a version mismatch between the Imake expected by the package and the Imake supported by the host. These problems are much rarer with Autoconf, where each package comes with its own independent configuration processor. Also, Imake often suffers from unexpected interactions between `make' and the installer's C preprocessor. The fundamental problem here is that the C preprocessor was designed to preprocess C programs, not `Makefile's. This is much less of a problem with Autoconf, which uses the general-purpose preprocessor M4, and where the package's author (rather than the installer) does the preprocessing in a standard way. Finally, Mark Eichin notes: Imake isn't all that extensible, either. In order to add new features to Imake, you need to provide your own project template, and duplicate most of the features of the existing one. This means that for a sophisticated project, using the vendor-provided Imake templates fails to provide any leverage--since they don't cover anything that your own project needs (unless it is an X11 program). On the other side, though: The one advantage that Imake has over `configure': `Imakefile's tend to be much shorter (likewise, less redundant) than `Makefile.in's. There is a fix to this, however--at least for the Kerberos V5 tree, we've modified things to call in common `post.in' and `pre.in' `Makefile' fragments for the entire tree. This means that a lot of common things don't have to be duplicated, even though they normally are in `configure' setups. How Do I `#define' Installation Directories? ============================================ My program needs library files, installed in `datadir' and similar. If I use AC_DEFINE_UNQUOTED([DATADIR], [$datadir], [Define to the read-only architecture-independent data directory.]) I get #define DATADIR "${prefix}/share" As already explained, this behavior is on purpose, mandated by the GNU Coding Standards, see *Note Installation Directory Variables::. There are several means to achieve a similar goal: - Do not use `AC_DEFINE' but use your `Makefile' to pass the actual value of `datadir' via compilation flags, see *Note Installation Directory Variables::, for the details. - This solution can be simplified when compiling a program: you may either extend the `CPPFLAGS': CPPFLAGS = -DDATADIR=\"$(datadir)\" @CPPFLAGS@ or create a dedicated header file: DISTCLEANFILES = datadir.h datadir.h: Makefile echo '#define DATADIR "$(datadir)"' >$@ - Use `AC_DEFINE' but have `configure' compute the literal value of `datadir' and others. Many people have wrapped macros to automate this task. For instance, the macro `AC_DEFINE_DIR' from the Autoconf Macro Archive(1). This solution does not conform to the GNU Coding Standards. - Note that all the previous solutions hard wire the absolute path to these directories in the executables, which is not a good property. You may try to compute the paths relatively to `prefix', and try to find `prefix' at runtime, this way your package is relocatable. Some macros are already available to address this issue: see `adl_COMPUTE_RELATIVE_PATHS' and `adl_COMPUTE_STANDARD_RELATIVE_PATHS' on the Autoconf Macro Archive(2). ---------- Footnotes ---------- (1) Autoconf Macro Archive, . (2) Autoconf Macro Archive, . What is `autom4te.cache'? ========================= What is this directory `autom4te.cache'? Can I safely remove it? In the GNU Build System, `configure.ac' plays a central role and is read by many tools: `autoconf' to create `configure', `autoheader' to create `config.h.in', `automake' to create `Makefile.in', `autoscan' to check the completeness of `configure.ac', `autoreconf' to check the GNU Build System components that are used. To "read `configure.ac'" actually means to compile it with M4, which can be a very long process for complex `configure.ac'. This is why all these tools, instead of running directly M4, invoke `autom4te' (*note autom4te Invocation::) which, while answering to a specific demand, stores additional information in `autom4te.cache' for future runs. For instance, if you run `autoconf', behind the scenes, `autom4te' will also store information for the other tools, so that when you invoke `autoheader' or `automake' etc., re-processing `configure.ac' is not needed. The speed up is frequently of 30, and is increasing with the size of `configure.ac'. But it is and remains being simply a cache: you can safely remove it. Can I permanently get rid of it? The creation of this cache can be disabled from `~/.autom4te.cfg', see *Note Customizing autom4te::, for more details. You should be aware that disabling the cache slows down the Autoconf test suite by 40%. The more GNU Build System components are used, the more the cache is useful; for instance running `autoreconf -f' on the Coreutils is twice slower without the cache _although `--force' implies that the cache is not fully exploited_, and eight times slower than without `--force'. History of Autoconf ******************* You may be wondering, Why was Autoconf originally written? How did it get into its present form? (Why does it look like gorilla spit?) If you're not wondering, then this chapter contains no information useful to you, and you might as well skip it. If you _are_ wondering, then let there be light.... Genesis ======= In June 1991 I was maintaining many of the GNU utilities for the Free Software Foundation. As they were ported to more platforms and more programs were added, the number of `-D' options that users had to select in the `Makefile' (around 20) became burdensome. Especially for me--I had to test each new release on a bunch of different systems. So I wrote a little shell script to guess some of the correct settings for the fileutils package, and released it as part of fileutils 2.0. That `configure' script worked well enough that the next month I adapted it (by hand) to create similar `configure' scripts for several other GNU utilities packages. Brian Berliner also adapted one of my scripts for his CVS revision control system. Later that summer, I learned that Richard Stallman and Richard Pixley were developing similar scripts to use in the GNU compiler tools; so I adapted my `configure' scripts to support their evolving interface: using the file name `Makefile.in' as the templates; adding `+srcdir', the first option (of many); and creating `config.status' files. Exodus ====== As I got feedback from users, I incorporated many improvements, using Emacs to search and replace, cut and paste, similar changes in each of the scripts. As I adapted more GNU utilities packages to use `configure' scripts, updating them all by hand became impractical. Rich Murphey, the maintainer of the GNU graphics utilities, sent me mail saying that the `configure' scripts were great, and asking if I had a tool for generating them that I could send him. No, I thought, but I should! So I started to work out how to generate them. And the journey from the slavery of hand-written `configure' scripts to the abundance and ease of Autoconf began. Cygnus `configure', which was being developed at around that time, is table driven; it is meant to deal mainly with a discrete number of system types with a small number of mainly unguessable features (such as details of the object file format). The automatic configuration system that Brian Fox had developed for Bash takes a similar approach. For general use, it seems to me a hopeless cause to try to maintain an up-to-date database of which features each variant of each operating system has. It's easier and more reliable to check for most features on the fly--especially on hybrid systems that people have hacked on locally or that have patches from vendors installed. I considered using an architecture similar to that of Cygnus `configure', where there is a single `configure' script that reads pieces of `configure.in' when run. But I didn't want to have to distribute all of the feature tests with every package, so I settled on having a different `configure' made from each `configure.in' by a preprocessor. That approach also offered more control and flexibility. I looked briefly into using the Metaconfig package, by Larry Wall, Harlan Stenn, and Raphael Manfredi, but I decided not to for several reasons. The `Configure' scripts it produces are interactive, which I find quite inconvenient; I didn't like the ways it checked for some features (such as library functions); I didn't know that it was still being maintained, and the `Configure' scripts I had seen didn't work on many modern systems (such as System V R4 and NeXT); it wasn't very flexible in what it could do in response to a feature's presence or absence; I found it confusing to learn; and it was too big and complex for my needs (I didn't realize then how much Autoconf would eventually have to grow). I considered using Perl to generate my style of `configure' scripts, but decided that M4 was better suited to the job of simple textual substitutions: it gets in the way less, because output is implicit. Plus, everyone already has it. (Initially I didn't rely on the GNU extensions to M4.) Also, some of my friends at the University of Maryland had recently been putting M4 front ends on several programs, including `tvtwm', and I was interested in trying out a new language. Leviticus ========= Since my `configure' scripts determine the system's capabilities automatically, with no interactive user intervention, I decided to call the program that generates them Autoconfig. But with a version number tacked on, that name would be too long for old UNIX file systems, so I shortened it to Autoconf. In the fall of 1991 I called together a group of fellow questers after the Holy Grail of portability (er, that is, alpha testers) to give me feedback as I encapsulated pieces of my handwritten scripts in M4 macros and continued to add features and improve the techniques used in the checks. Prominent among the testers were Franc,ois Pinard, who came up with the idea of making an Autoconf shell script to run M4 and check for unresolved macro calls; Richard Pixley, who suggested running the compiler instead of searching the file system to find include files and symbols, for more accurate results; Karl Berry, who got Autoconf to configure TeX and added the macro index to the documentation; and Ian Lance Taylor, who added support for creating a C header file as an alternative to putting `-D' options in a `Makefile', so he could use Autoconf for his UUCP package. The alpha testers cheerfully adjusted their files again and again as the names and calling conventions of the Autoconf macros changed from release to release. They all contributed many specific checks, great ideas, and bug fixes. Numbers ======= In July 1992, after months of alpha testing, I released Autoconf 1.0, and converted many GNU packages to use it. I was surprised by how positive the reaction to it was. More people started using it than I could keep track of, including people working on software that wasn't part of the GNU Project (such as TCL, FSP, and Kerberos V5). Autoconf continued to improve rapidly, as many people using the `configure' scripts reported problems they encountered. Autoconf turned out to be a good torture test for M4 implementations. UNIX M4 started to dump core because of the length of the macros that Autoconf defined, and several bugs showed up in GNU M4 as well. Eventually, we realized that we needed to use some features that only GNU M4 has. 4.3BSD M4, in particular, has an impoverished set of builtin macros; the System V version is better, but still doesn't provide everything we need. More development occurred as people put Autoconf under more stresses (and to uses I hadn't anticipated). Karl Berry added checks for X11. david zuhn contributed C++ support. Franc,ois Pinard made it diagnose invalid arguments. Jim Blandy bravely coerced it into configuring GNU Emacs, laying the groundwork for several later improvements. Roland McGrath got it to configure the GNU C Library, wrote the `autoheader' script to automate the creation of C header file templates, and added a `--verbose' option to `configure'. Noah Friedman added the `--autoconf-dir' option and `AC_MACRODIR' environment variable. (He also coined the term "autoconfiscate" to mean "adapt a software package to use Autoconf".) Roland and Noah improved the quoting protection in `AC_DEFINE' and fixed many bugs, especially when I got sick of dealing with portability problems from February through June, 1993. Deuteronomy =========== A long wish list for major features had accumulated, and the effect of several years of patching by various people had left some residual cruft. In April 1994, while working for Cygnus Support, I began a major revision of Autoconf. I added most of the features of the Cygnus `configure' that Autoconf had lacked, largely by adapting the relevant parts of Cygnus `configure' with the help of david zuhn and Ken Raeburn. These features include support for using `config.sub', `config.guess', `--host', and `--target'; making links to files; and running `configure' scripts in subdirectories. Adding these features enabled Ken to convert GNU `as', and Rob Savoye to convert DejaGNU, to using Autoconf. I added more features in response to other peoples' requests. Many people had asked for `configure' scripts to share the results of the checks between runs, because (particularly when configuring a large source tree, like Cygnus does) they were frustratingly slow. Mike Haertel suggested adding site-specific initialization scripts. People distributing software that had to unpack on MS-DOS asked for a way to override the `.in' extension on the file names, which produced file names like `config.h.in' containing two dots. Jim Avera did an extensive examination of the problems with quoting in `AC_DEFINE' and `AC_SUBST'; his insights led to significant improvements. Richard Stallman asked that compiler output be sent to `config.log' instead of `/dev/null', to help people debug the Emacs `configure' script. I made some other changes because of my dissatisfaction with the quality of the program. I made the messages showing results of the checks less ambiguous, always printing a result. I regularized the names of the macros and cleaned up coding style inconsistencies. I added some auxiliary utilities that I had developed to help convert source code packages to use Autoconf. With the help of Franc,ois Pinard, I made the macros not interrupt each others' messages. (That feature revealed some performance bottlenecks in GNU M4, which he hastily corrected!) I reorganized the documentation around problems people want to solve. And I began a test suite, because experience had shown that Autoconf has a pronounced tendency to regress when we change it. Again, several alpha testers gave invaluable feedback, especially Franc,ois Pinard, Jim Meyering, Karl Berry, Rob Savoye, Ken Raeburn, and Mark Eichin. Finally, version 2.0 was ready. And there was much rejoicing. (And I have free time again. I think. Yeah, right.) Copying This Manual ******************* GNU Free Documentation License ============================== Version 1.2, November 2002 Copyright (C) 2000,2001,2002 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. 0. PREAMBLE The purpose of this License is to make a manual, textbook, or other functional and useful document "free" in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others. This License is a kind of "copyleft", which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software. We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference. 1. APPLICABILITY AND DEFINITIONS This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The "Document", below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as "you". You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law. A "Modified Version" of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language. A "Secondary Section" is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them. The "Invariant Sections" are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none. The "Cover Texts" are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words. A "Transparent" copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not "Transparent" is called "Opaque". Examples of suitable formats for Transparent copies include plain ASCII without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only. The "Title Page" means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, "Title Page" means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text. A section "Entitled XYZ" means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as "Acknowledgements", "Dedications", "Endorsements", or "History".) To "Preserve the Title" of such a section when you modify the Document means that it remains a section "Entitled XYZ" according to this definition. The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License. 2. VERBATIM COPYING You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3. You may also lend copies, under the same conditions stated above, and you may publicly display copies. 3. COPYING IN QUANTITY If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects. If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages. If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public. It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document. 4. MODIFICATIONS You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version: A. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission. B. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement. C. State on the Title page the name of the publisher of the Modified Version, as the publisher. D. Preserve all the copyright notices of the Document. E. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices. F. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below. G. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice. H. Include an unaltered copy of this License. I. Preserve the section Entitled "History", Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled "History" in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence. J. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the "History" section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission. K. For any section Entitled "Acknowledgements" or "Dedications", Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein. L. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles. M. Delete any section Entitled "Endorsements". Such a section may not be included in the Modified Version. N. Do not retitle any existing section to be Entitled "Endorsements" or to conflict in title with any Invariant Section. O. Preserve any Warranty Disclaimers. If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles. You may add a section Entitled "Endorsements", provided it contains nothing but endorsements of your Modified Version by various parties--for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard. You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one. The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version. 5. COMBINING DOCUMENTS You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers. The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work. In the combination, you must combine any sections Entitled "History" in the various original documents, forming one section Entitled "History"; likewise combine any sections Entitled "Acknowledgements", and any sections Entitled "Dedications". You must delete all sections Entitled "Endorsements." 6. COLLECTIONS OF DOCUMENTS You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects. You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document. 7. AGGREGATION WITH INDEPENDENT WORKS A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an "aggregate" if the copyright resulting from the compilation is not used to limit the legal rights of the compilation's users beyond what the individual works permit. When the Document is included an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document. If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document's Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate. 8. TRANSLATION Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warrany Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail. If a section in the Document is Entitled "Acknowledgements", "Dedications", or "History", the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title. 9. TERMINATION You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 10. FUTURE REVISIONS OF THIS LICENSE The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See `http://www.gnu.org/copyleft/'. Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License "or any later version" applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation. ADDENDUM: How to use this License for your documents ---------------------------------------------------- To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page: Copyright (C) YEAR YOUR NAME. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled ``GNU Free Documentation License''. If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the "with...Texts." line with this: with the Invariant Sections being LIST THEIR TITLES, with the Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation. If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software. Indices ******* Environment Variable Index ========================== This is an alphabetical list of the environment variables that Autoconf checks. CDPATH: See ``Special Shell Variables''. CONFIG_COMMANDS: See ``Obsolete `config.status' Invocation''. CONFIG_FILES: See ``Obsolete `config.status' Invocation''. CONFIG_HEADERS: See ``Obsolete `config.status' Invocation''. CONFIG_LINKS: See ``Obsolete `config.status' Invocation''. CONFIG_SHELL: See ``Recreating a Configuration''. CONFIG_SITE: See ``Setting Site Defaults''. CONFIG_STATUS: See ``Recreating a Configuration''. ENV: See ``Special Shell Variables''. IFS: See ``Special Shell Variables''. LANG: See ``Special Shell Variables''. LANGUAGE: See ``Special Shell Variables''. LC_ADDRESS: See ``Special Shell Variables''. LC_ALL: See ``Special Shell Variables''. LC_COLLATE: See ``Special Shell Variables''. LC_CTYPE: See ``Special Shell Variables''. LC_IDENTIFICATION: See ``Special Shell Variables''. LC_MEASUREMENT: See ``Special Shell Variables''. LC_MESSAGES: See ``Special Shell Variables''. LC_MONETARY: See ``Special Shell Variables''. LC_NAME: See ``Special Shell Variables''. LC_NUMERIC: See ``Special Shell Variables''. LC_PAPER: See ``Special Shell Variables''. LC_TELEPHONE: See ``Special Shell Variables''. LC_TIME: See ``Special Shell Variables''. LINENO: See ``Special Shell Variables''. MAIL: See ``Special Shell Variables''. MAILPATH: See ``Special Shell Variables''. NULLCMD: See ``Special Shell Variables''. PATH_SEPARATOR: See ``Special Shell Variables''. PS1: See ``Special Shell Variables''. PS2: See ``Special Shell Variables''. PS4: See ``Special Shell Variables''. PWD: See ``Special Shell Variables''. RANDOM: See ``Special Shell Variables''. SIMPLE_BACKUP_SUFFIX: See ``Using `autoupdate' to Modernize `configure.ac'''. status: See ``Special Shell Variables''. WARNINGS <1>: See ``Invoking `autom4te'''. WARNINGS <2>: See ``Using `autoheader' to Create `config.h.in'''. WARNINGS <3>: See ``Using `autoreconf' to Update `configure' Scripts''. WARNINGS: See ``Using `autoconf' to Create `configure'''. Output Variable Index ===================== This is an alphabetical list of the variables that Autoconf can substitute into files that it creates, typically one or more `Makefile's. *Note Setting Output Variables::, for more information on how this is done. abs_builddir: See ``Preset Output Variables''. abs_srcdir: See ``Preset Output Variables''. abs_top_builddir: See ``Preset Output Variables''. abs_top_srcdir: See ``Preset Output Variables''. ALLOCA: See ``Particular Function Checks''. AWK: See ``Particular Program Checks''. bindir: See ``Installation Directory Variables''. build: See ``Getting the Canonical System Type''. build_alias: See ``Getting the Canonical System Type''. build_cpu: See ``Getting the Canonical System Type''. build_os: See ``Getting the Canonical System Type''. build_vendor: See ``Getting the Canonical System Type''. builddir: See ``Preset Output Variables''. CC <1>: See ``System Services''. CC: See ``C Compiler Characteristics''. CFLAGS <1>: See ``C Compiler Characteristics''. CFLAGS: See ``Preset Output Variables''. configure_input: See ``Preset Output Variables''. CPP: See ``C Compiler Characteristics''. CPPFLAGS: See ``Preset Output Variables''. cross_compiling: See ``Specifying the System Type''. CXX: See ``C++ Compiler Characteristics''. CXXCPP: See ``C++ Compiler Characteristics''. CXXFLAGS <1>: See ``C++ Compiler Characteristics''. CXXFLAGS: See ``Preset Output Variables''. datadir: See ``Installation Directory Variables''. DEFS: See ``Preset Output Variables''. ECHO_C: See ``Preset Output Variables''. ECHO_N: See ``Preset Output Variables''. ECHO_T: See ``Preset Output Variables''. EGREP: See ``Particular Program Checks''. exec_prefix: See ``Installation Directory Variables''. EXEEXT <1>: See ``Obsolete Macros''. EXEEXT: See ``Compilers and Preprocessors''. F77: See ``Fortran 77 Compiler Characteristics''. FFLAGS <1>: See ``Fortran 77 Compiler Characteristics''. FFLAGS: See ``Preset Output Variables''. FGREP: See ``Particular Program Checks''. FLIBS: See ``Fortran 77 Compiler Characteristics''. GETGROUPS_LIBS: See ``Particular Function Checks''. GETLOADAVG_LIBS: See ``Particular Function Checks''. host: See ``Getting the Canonical System Type''. host_alias: See ``Getting the Canonical System Type''. host_cpu: See ``Getting the Canonical System Type''. host_os: See ``Getting the Canonical System Type''. host_vendor: See ``Getting the Canonical System Type''. includedir: See ``Installation Directory Variables''. infodir: See ``Installation Directory Variables''. INSTALL: See ``Particular Program Checks''. INSTALL_DATA: See ``Particular Program Checks''. INSTALL_PROGRAM: See ``Particular Program Checks''. INSTALL_SCRIPT: See ``Particular Program Checks''. KMEM_GROUP: See ``Particular Function Checks''. LDFLAGS: See ``Preset Output Variables''. LEX: See ``Particular Program Checks''. LEX_OUTPUT_ROOT: See ``Particular Program Checks''. LEXLIB: See ``Particular Program Checks''. libdir: See ``Installation Directory Variables''. libexecdir: See ``Installation Directory Variables''. LIBOBJS <1>: See ``Particular Structure Checks''. LIBOBJS <2>: See ``Generic Function Checks''. LIBOBJS: See ``Particular Function Checks''. LIBS <1>: See ``Obsolete Macros''. LIBS <2>: See ``UNIX Variants''. LIBS: See ``Preset Output Variables''. LN_S: See ``Particular Program Checks''. localstatedir: See ``Installation Directory Variables''. mandir: See ``Installation Directory Variables''. NEED_SETGID: See ``Particular Function Checks''. OBJEXT <1>: See ``Obsolete Macros''. OBJEXT: See ``Compilers and Preprocessors''. oldincludedir: See ``Installation Directory Variables''. PACKAGE_BUGREPORT: See ``Initializing `configure'''. PACKAGE_NAME: See ``Initializing `configure'''. PACKAGE_STRING: See ``Initializing `configure'''. PACKAGE_TARNAME: See ``Initializing `configure'''. PACKAGE_VERSION: See ``Initializing `configure'''. POW_LIB: See ``Particular Function Checks''. prefix: See ``Installation Directory Variables''. program_transform_name: See ``Transforming Program Names When Installing''. RANLIB: See ``Particular Program Checks''. sbindir: See ``Installation Directory Variables''. SET_MAKE: See ``Outputting Files''. sharedstatedir: See ``Installation Directory Variables''. srcdir: See ``Preset Output Variables''. subdirs: See ``Configuring Other Packages in Subdirectories''. sysconfdir: See ``Installation Directory Variables''. target: See ``Getting the Canonical System Type''. target_alias: See ``Getting the Canonical System Type''. target_cpu: See ``Getting the Canonical System Type''. target_os: See ``Getting the Canonical System Type''. target_vendor: See ``Getting the Canonical System Type''. top_builddir: See ``Preset Output Variables''. top_srcdir: See ``Preset Output Variables''. U: See ```AC_LIBOBJ' vs. `LIBOBJS'''. X_CFLAGS: See ``System Services''. X_EXTRA_LIBS: See ``System Services''. X_LIBS: See ``System Services''. X_PRE_LIBS: See ``System Services''. YACC: See ``Particular Program Checks''. Preprocessor Symbol Index ========================= This is an alphabetical list of the C preprocessor symbols that the Autoconf macros define. To work with Autoconf, C source code needs to use these names in `#if' directives. __CHAR_UNSIGNED__: See ``C Compiler Characteristics''. __PROTOTYPES: See ``C Compiler Characteristics''. _ALL_SOURCE: See ``UNIX Variants''. _FILE_OFFSET_BITS: See ``System Services''. _GNU_SOURCE: See ``UNIX Variants''. _LARGE_FILES: See ``System Services''. _LARGEFILE_SOURCE: See ``Particular Function Checks''. _MINIX: See ``UNIX Variants''. _POSIX_1_SOURCE: See ``UNIX Variants''. _POSIX_SOURCE: See ``UNIX Variants''. _POSIX_VERSION: See ``Particular Header Checks''. C_ALLOCA: See ``Particular Function Checks''. C_GETLOADAVG: See ``Particular Function Checks''. CLOSEDIR_VOID: See ``Particular Function Checks''. const: See ``C Compiler Characteristics''. DGUX: See ``Particular Function Checks''. DIRENT: See ``Obsolete Macros''. F77_DUMMY_MAIN: See ``Fortran 77 Compiler Characteristics''. F77_FUNC: See ``Fortran 77 Compiler Characteristics''. F77_FUNC_: See ``Fortran 77 Compiler Characteristics''. F77_MAIN: See ``Fortran 77 Compiler Characteristics''. F77_NO_MINUS_C_MINUS_O: See ``Fortran 77 Compiler Characteristics''. GETGROUPS_T: See ``Particular Type Checks''. GETLODAVG_PRIVILEGED: See ``Particular Function Checks''. GETPGRP_VOID: See ``Particular Function Checks''. gid_t: See ``Particular Type Checks''. GWINSZ_IN_SYS_IOCTL: See ``Particular Header Checks''. HAVE__BOOL: See ``Particular Header Checks''. HAVE_ALLOCA_H: See ``Particular Function Checks''. HAVE_CONFIG_H: See ``Configuration Header Files''. HAVE_DECL_STRERROR_R: See ``Particular Function Checks''. HAVE_DECL_SYMBOL: See ``Generic Declaration Checks''. HAVE_DIRENT_H: See ``Particular Header Checks''. HAVE_DOPRNT: See ``Particular Function Checks''. HAVE_FUNCTION: See ``Generic Function Checks''. HAVE_GETMNTENT: See ``Particular Function Checks''. HAVE_HEADER: See ``Generic Header Checks''. HAVE_LONG_DOUBLE: See ``C Compiler Characteristics''. HAVE_LONG_FILE_NAMES: See ``System Services''. HAVE_LSTAT_EMPTY_STRING_BUG: See ``Particular Function Checks''. HAVE_MALLOC: See ``Particular Function Checks''. HAVE_MBRTOWC: See ``Particular Function Checks''. HAVE_MMAP: See ``Particular Function Checks''. HAVE_NDIR_H: See ``Particular Header Checks''. HAVE_NLIST_H: See ``Particular Function Checks''. HAVE_OBSTACK: See ``Particular Function Checks''. HAVE_REALLOC: See ``Particular Function Checks''. HAVE_RESTARTABLE_SYSCALLS: See ``Obsolete Macros''. HAVE_ST_BLKSIZE: See ``Particular Structure Checks''. HAVE_ST_BLOCKS: See ``Particular Structure Checks''. HAVE_ST_RDEV: See ``Particular Structure Checks''. HAVE_STAT_EMPTY_STRING_BUG: See ``Particular Function Checks''. HAVE_STDBOOL_H: See ``Particular Header Checks''. HAVE_STRCOLL: See ``Particular Function Checks''. HAVE_STRERROR_R: See ``Particular Function Checks''. HAVE_STRFTIME: See ``Particular Function Checks''. HAVE_STRINGIZE: See ``C Compiler Characteristics''. HAVE_STRNLEN: See ``Particular Function Checks''. HAVE_STRUCT_STAT_ST_BLKSIZE: See ``Particular Structure Checks''. HAVE_STRUCT_STAT_ST_BLOCKS: See ``Particular Structure Checks''. HAVE_STRUCT_STAT_ST_RDEV: See ``Particular Structure Checks''. HAVE_SYS_DIR_H: See ``Particular Header Checks''. HAVE_SYS_NDIR_H: See ``Particular Header Checks''. HAVE_SYS_WAIT_H: See ``Particular Header Checks''. HAVE_TM_ZONE: See ``Particular Structure Checks''. HAVE_TZNAME: See ``Particular Structure Checks''. HAVE_UTIME_NULL: See ``Particular Function Checks''. HAVE_VFORK_H: See ``Particular Function Checks''. HAVE_VPRINTF: See ``Particular Function Checks''. HAVE_WAIT3: See ``Obsolete Macros''. HAVE_WORKING_FORK: See ``Particular Function Checks''. HAVE_WORKING_VFORK: See ``Particular Function Checks''. inline: See ``C Compiler Characteristics''. INT_16_BITS: See ``Obsolete Macros''. LONG_64_BITS: See ``Obsolete Macros''. LSTAT_FOLLOWS_SLASHED_SYMLINK: See ``Particular Function Checks''. MAJOR_IN_MKDEV: See ``Particular Header Checks''. MAJOR_IN_SYSMACROS: See ``Particular Header Checks''. malloc: See ``Particular Function Checks''. mbstate_t: See ``Particular Type Checks''. mode_t: See ``Particular Type Checks''. NDIR: See ``Obsolete Macros''. NEED_MEMORY_H: See ``Obsolete Macros''. NEED_SETGID: See ``Particular Function Checks''. NLIST_NAME_UNION: See ``Particular Function Checks''. NO_MINUS_C_MINUS_O: See ``C Compiler Characteristics''. off_t: See ``Particular Type Checks''. PACKAGE_BUGREPORT: See ``Initializing `configure'''. PACKAGE_NAME: See ``Initializing `configure'''. PACKAGE_STRING: See ``Initializing `configure'''. PACKAGE_TARNAME: See ``Initializing `configure'''. PACKAGE_VERSION: See ``Initializing `configure'''. PARAMS: See ``C Compiler Characteristics''. pid_t: See ``Particular Type Checks''. PROTOTYPES: See ``C Compiler Characteristics''. realloc: See ``Particular Function Checks''. RETSIGTYPE: See ``Particular Type Checks''. SELECT_TYPE_ARG1: See ``Particular Function Checks''. SELECT_TYPE_ARG234: See ``Particular Function Checks''. SELECT_TYPE_ARG5: See ``Particular Function Checks''. SETPGRP_VOID: See ``Particular Function Checks''. SETVBUF_REVERSED: See ``Particular Function Checks''. size_t: See ``Particular Type Checks''. STDC_HEADERS: See ``Particular Header Checks''. STRERROR_R_CHAR_P: See ``Particular Function Checks''. SVR4: See ``Particular Function Checks''. SYS_SIGLIST_DECLARED: See ``Obsolete Macros''. SYSDIR: See ``Obsolete Macros''. SYSNDIR: See ``Obsolete Macros''. TIME_WITH_SYS_TIME: See ``Particular Header Checks''. TM_IN_SYS_TIME: See ``Particular Structure Checks''. uid_t: See ``Particular Type Checks''. UMAX: See ``Particular Function Checks''. UMAX4_3: See ``Particular Function Checks''. USG: See ``Obsolete Macros''. vfork: See ``Particular Function Checks''. volatile: See ``C Compiler Characteristics''. WORDS_BIGENDIAN: See ``C Compiler Characteristics''. X_DISPLAY_MISSING: See ``System Services''. YYTEXT_POINTER: See ``Particular Program Checks''. Autoconf Macro Index ==================== This is an alphabetical list of the Autoconf macros. To make the list easier to use, the macros are listed without their preceding `AC_'. AH_BOTTOM: See ``Autoheader Macros''. AH_TEMPLATE: See ``Autoheader Macros''. AH_TOP: See ``Autoheader Macros''. AH_VERBATIM: See ``Autoheader Macros''. AIX: See ``UNIX Variants''. ALLOCA: See ``Obsolete Macros''. ARG_ARRAY: See ``Obsolete Macros''. ARG_ENABLE: See ``Choosing Package Options''. ARG_PROGRAM: See ``Transforming Program Names When Installing''. ARG_VAR: See ``Setting Output Variables''. ARG_WITH: See ``Working With External Software''. AU_DEFUN: See ``Obsoleting Macros''. BEFORE: See ``Suggested Ordering''. BOTTOM: See ``Autoheader Macros''. C_BIGENDIAN: See ``C Compiler Characteristics''. C_CHAR_UNSIGNED: See ``C Compiler Characteristics''. C_CONST: See ``C Compiler Characteristics''. C_CROSS: See ``Obsolete Macros''. C_INLINE: See ``C Compiler Characteristics''. C_LONG_DOUBLE: See ``C Compiler Characteristics''. C_PROTOTYPES: See ``C Compiler Characteristics''. C_STRINGIZE: See ``C Compiler Characteristics''. C_VOLATILE: See ``C Compiler Characteristics''. CACHE_CHECK: See ``Caching Results''. CACHE_LOAD: See ``Cache Checkpointing''. CACHE_SAVE: See ``Cache Checkpointing''. CACHE_VAL: See ``Caching Results''. CANONICAL_BUILD: See ``Getting the Canonical System Type''. CANONICAL_HOST: See ``Getting the Canonical System Type''. CANONICAL_SYSTEM: See ``Obsolete Macros''. CANONICAL_TARGET: See ``Getting the Canonical System Type''. CHAR_UNSIGNED: See ``Obsolete Macros''. CHECK_DECL: See ``Generic Declaration Checks''. CHECK_DECLS: See ``Generic Declaration Checks''. CHECK_FILE: See ``Files''. CHECK_FILES: See ``Files''. CHECK_FUNC: See ``Generic Function Checks''. CHECK_FUNCS: See ``Generic Function Checks''. CHECK_HEADER: See ``Generic Header Checks''. CHECK_HEADERS: See ``Generic Header Checks''. CHECK_LIB: See ``Library Files''. CHECK_MEMBER: See ``Generic Structure Checks''. CHECK_MEMBERS: See ``Generic Structure Checks''. CHECK_PROG: See ``Generic Program and File Checks''. CHECK_PROGS: See ``Generic Program and File Checks''. CHECK_SIZEOF: See ``Generic Compiler Characteristics''. CHECK_TOOL: See ``Generic Program and File Checks''. CHECK_TOOLS: See ``Generic Program and File Checks''. CHECK_TYPE <1>: See ``Obsolete Macros''. CHECK_TYPE: See ``Generic Type Checks''. CHECK_TYPES: See ``Generic Type Checks''. CHECKING: See ``Obsolete Macros''. COMPILE_CHECK: See ``Obsolete Macros''. COMPILE_IFELSE: See ``Running the Compiler''. CONFIG_AUX_DIR: See ``Finding `configure' Input''. CONFIG_COMMANDS: See ``Running Arbitrary Configuration Commands''. CONFIG_FILES: See ``Creating Configuration Files''. CONFIG_HEADERS: See ``Configuration Header Files''. CONFIG_LIBOBJ_DIR: See ``Generic Function Checks''. CONFIG_LINKS: See ``Creating Configuration Links''. CONFIG_SRCDIR: See ``Finding `configure' Input''. CONFIG_SUBDIRS: See ``Configuring Other Packages in Subdirectories''. CONFIG_TESTDIR: See ``Making `testsuite' Scripts''. CONST: See ``Obsolete Macros''. COPYRIGHT: See ``Notices in `configure'''. CROSS_CHECK: See ``Obsolete Macros''. CYGWIN: See ``Obsolete Macros''. DECL_SYS_SIGLIST: See ``Obsolete Macros''. DECL_YYTEXT: See ``Obsolete Macros''. DEFINE: See ``Defining C Preprocessor Symbols''. DEFINE_UNQUOTED: See ``Defining C Preprocessor Symbols''. DEFUN <1>: See ``Obsoleting Macros''. DEFUN: See ``Macro Definitions''. DIAGNOSE: See ``Reporting Messages''. DIR_HEADER: See ``Obsolete Macros''. DYNIX_SEQ: See ``Obsolete Macros''. EGREP_CPP: See ``Running the Preprocessor''. EGREP_HEADER: See ``Running the Preprocessor''. EMXOS2: See ``Obsolete Macros''. ENABLE: See ``Choosing Package Options''. ERROR: See ``Obsolete Macros''. EXEEXT: See ``Obsolete Macros''. F77_DUMMY_MAIN: See ``Fortran 77 Compiler Characteristics''. F77_FUNC: See ``Fortran 77 Compiler Characteristics''. F77_LIBRARY_LDFLAGS: See ``Fortran 77 Compiler Characteristics''. F77_MAIN: See ``Fortran 77 Compiler Characteristics''. F77_WRAPPERS: See ``Fortran 77 Compiler Characteristics''. FATAL: See ``Reporting Messages''. FIND_X: See ``Obsolete Macros''. FIND_XTRA: See ``Obsolete Macros''. FUNC_ALLOCA: See ``Particular Function Checks''. FUNC_CHECK: See ``Obsolete Macros''. FUNC_CHOWN: See ``Particular Function Checks''. FUNC_CLOSEDIR_VOID: See ``Particular Function Checks''. FUNC_ERROR_AT_LINE: See ``Particular Function Checks''. FUNC_FNMATCH: See ``Particular Function Checks''. FUNC_FNMATCH_GNU: See ``Particular Function Checks''. FUNC_FORK: See ``Particular Function Checks''. FUNC_FSEEKO: See ``Particular Function Checks''. FUNC_GETGROUPS: See ``Particular Function Checks''. FUNC_GETLOADAVG: See ``Particular Function Checks''. FUNC_GETMNTENT: See ``Particular Function Checks''. FUNC_GETPGRP: See ``Particular Function Checks''. FUNC_LSTAT: See ``Particular Function Checks''. FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK: See ``Particular Function Checks''. FUNC_MALLOC: See ``Particular Function Checks''. FUNC_MBRTOWC: See ``Particular Function Checks''. FUNC_MEMCMP: See ``Particular Function Checks''. FUNC_MKTIME: See ``Particular Function Checks''. FUNC_MMAP: See ``Particular Function Checks''. FUNC_OBSTACK: See ``Particular Function Checks''. FUNC_REALLOC: See ``Particular Function Checks''. FUNC_SELECT_ARGTYPES: See ``Particular Function Checks''. FUNC_SETPGRP: See ``Particular Function Checks''. FUNC_SETVBUF_REVERSED: See ``Particular Function Checks''. FUNC_STAT: See ``Particular Function Checks''. FUNC_STRCOLL: See ``Particular Function Checks''. FUNC_STRERROR_R: See ``Particular Function Checks''. FUNC_STRFTIME: See ``Particular Function Checks''. FUNC_STRNLEN: See ``Particular Function Checks''. FUNC_STRTOD: See ``Particular Function Checks''. FUNC_UTIME_NULL: See ``Particular Function Checks''. FUNC_VPRINTF: See ``Particular Function Checks''. FUNC_WAIT3: See ``Obsolete Macros''. GCC_TRADITIONAL: See ``Obsolete Macros''. GETGROUPS_T: See ``Obsolete Macros''. GETLOADAVG: See ``Obsolete Macros''. GNU_SOURCE: See ``UNIX Variants''. HAVE_C_BACKSLASH_A: See ``C Compiler Characteristics''. HAVE_FUNCS: See ``Obsolete Macros''. HAVE_HEADERS: See ``Obsolete Macros''. HAVE_LIBRARY: See ``Obsolete Macros''. HAVE_POUNDBANG: See ``Obsolete Macros''. HEADER_CHECK: See ``Obsolete Macros''. HEADER_DIRENT: See ``Particular Header Checks''. HEADER_EGREP: See ``Obsolete Macros''. HEADER_MAJOR: See ``Particular Header Checks''. HEADER_STAT: See ``Particular Header Checks''. HEADER_STDBOOL: See ``Particular Header Checks''. HEADER_STDC: See ``Particular Header Checks''. HEADER_SYS_WAIT: See ``Particular Header Checks''. HEADER_TIME: See ``Particular Header Checks''. HEADER_TIOCGWINSZ: See ``Particular Header Checks''. HELP_STRING: See ``Making Your Help Strings Look Pretty''. INIT <1>: See ``Obsolete Macros''. INIT: See ``Initializing `configure'''. INLINE: See ``Obsolete Macros''. INT_16_BITS: See ``Obsolete Macros''. IRIX_SUN: See ``Obsolete Macros''. ISC_POSIX: See ``UNIX Variants''. LANG_C: See ``Obsolete Macros''. LANG_CALL: See ``Generating Sources''. LANG_CONFTEST: See ``Generating Sources''. LANG_CPLUSPLUS: See ``Obsolete Macros''. LANG_FORTRAN77: See ``Obsolete Macros''. LANG_FUNC_LINK_TRY: See ``Generating Sources''. LANG_POP: See ``Language Choice''. LANG_PROGRAM: See ``Generating Sources''. LANG_PUSH: See ``Language Choice''. LANG_RESTORE: See ``Obsolete Macros''. LANG_SAVE: See ``Obsolete Macros''. LANG_SOURCE: See ``Generating Sources''. LIBOBJ: See ``Generic Function Checks''. LIBSOURCE: See ``Generic Function Checks''. LIBSOURCES: See ``Generic Function Checks''. LINK_FILES: See ``Obsolete Macros''. LINK_IFELSE: See ``Running the Linker''. LN_S: See ``Obsolete Macros''. LONG_64_BITS: See ``Obsolete Macros''. LONG_DOUBLE: See ``Obsolete Macros''. LONG_FILE_NAMES: See ``Obsolete Macros''. MAJOR_HEADER: See ``Obsolete Macros''. MEMORY_H: See ``Obsolete Macros''. MINGW32: See ``Obsolete Macros''. MINIX: See ``UNIX Variants''. MINUS_C_MINUS_O: See ``Obsolete Macros''. MMAP: See ``Obsolete Macros''. MODE_T: See ``Obsolete Macros''. MSG_CHECKING: See ``Printing Messages''. MSG_ERROR: See ``Printing Messages''. MSG_FAILURE: See ``Printing Messages''. MSG_NOTICE: See ``Printing Messages''. MSG_RESULT: See ``Printing Messages''. MSG_WARN: See ``Printing Messages''. OBJEXT: See ``Obsolete Macros''. OBSOLETE: See ``Obsolete Macros''. OFF_T: See ``Obsolete Macros''. OUTPUT <1>: See ``Obsolete Macros''. OUTPUT: See ``Outputting Files''. OUTPUT_COMMANDS: See ``Obsolete Macros''. OUTPUT_COMMANDS_POST: See ``Running Arbitrary Configuration Commands''. OUTPUT_COMMANDS_PRE: See ``Running Arbitrary Configuration Commands''. PACKAGE_BUGREPORT: See ``Initializing `configure'''. PACKAGE_NAME: See ``Initializing `configure'''. PACKAGE_STRING: See ``Initializing `configure'''. PACKAGE_TARNAME: See ``Initializing `configure'''. PACKAGE_VERSION: See ``Initializing `configure'''. PATH_PROG: See ``Generic Program and File Checks''. PATH_PROGS: See ``Generic Program and File Checks''. PATH_TOOL: See ``Generic Program and File Checks''. PATH_X: See ``System Services''. PATH_XTRA: See ``System Services''. PID_T: See ``Obsolete Macros''. PREFIX: See ``Obsolete Macros''. PREFIX_DEFAULT: See ``Default Prefix''. PREFIX_PROGRAM: See ``Default Prefix''. PREPROC_IFELSE: See ``Running the Preprocessor''. PREREQ: See ``Notices in `configure'''. PROG_AWK: See ``Particular Program Checks''. PROG_CC: See ``C Compiler Characteristics''. PROG_CC_C_O: See ``C Compiler Characteristics''. PROG_CC_STDC: See ``Obsolete Macros''. PROG_CPP: See ``C Compiler Characteristics''. PROG_CXX: See ``C++ Compiler Characteristics''. PROG_CXXCPP: See ``C++ Compiler Characteristics''. PROG_EGREP: See ``Particular Program Checks''. PROG_F77_C_O: See ``Fortran 77 Compiler Characteristics''. PROG_FGREP: See ``Particular Program Checks''. PROG_FORTRAN: See ``Fortran 77 Compiler Characteristics''. PROG_GCC_TRADITIONAL: See ``C Compiler Characteristics''. PROG_INSTALL: See ``Particular Program Checks''. PROG_LEX: See ``Particular Program Checks''. PROG_LN_S: See ``Particular Program Checks''. PROG_MAKE_SET: See ``Outputting Files''. PROG_RANLIB: See ``Particular Program Checks''. PROG_YACC: See ``Particular Program Checks''. PROGRAM_CHECK: See ``Obsolete Macros''. PROGRAM_EGREP: See ``Obsolete Macros''. PROGRAM_PATH: See ``Obsolete Macros''. PROGRAMS_CHECK: See ``Obsolete Macros''. PROGRAMS_PATH: See ``Obsolete Macros''. REMOTE_TAPE: See ``Obsolete Macros''. REPLACE_FNMATCH: See ``Particular Function Checks''. REPLACE_FUNCS: See ``Generic Function Checks''. REQUIRE: See ``Prerequisite Macros''. REQUIRE_CPP: See ``Language Choice''. RESTARTABLE_SYSCALLS: See ``Obsolete Macros''. RETSIGTYPE: See ``Obsolete Macros''. REVISION: See ``Notices in `configure'''. RSH: See ``Obsolete Macros''. RUN_IFELSE: See ``Checking Run Time Behavior''. SCO_INTL: See ``Obsolete Macros''. SEARCH_LIBS: See ``Library Files''. SET_MAKE: See ``Obsolete Macros''. SETVBUF_REVERSED: See ``Obsolete Macros''. SIZE_T: See ``Obsolete Macros''. SIZEOF_TYPE: See ``Obsolete Macros''. ST_BLKSIZE: See ``Obsolete Macros''. ST_BLOCKS: See ``Obsolete Macros''. ST_RDEV: See ``Obsolete Macros''. STAT_MACROS_BROKEN <1>: See ``Obsolete Macros''. STAT_MACROS_BROKEN: See ``Particular Header Checks''. STDC_HEADERS: See ``Obsolete Macros''. STRCOLL: See ``Obsolete Macros''. STRUCT_ST_BLKSIZE: See ``Particular Structure Checks''. STRUCT_ST_BLOCKS: See ``Particular Structure Checks''. STRUCT_ST_RDEV: See ``Particular Structure Checks''. STRUCT_TIMEZONE: See ``Particular Structure Checks''. STRUCT_TM: See ``Particular Structure Checks''. SUBST: See ``Setting Output Variables''. SUBST_FILE: See ``Setting Output Variables''. SYS_INTERPRETER: See ``System Services''. SYS_LARGEFILE: See ``System Services''. SYS_LONG_FILE_NAMES: See ``System Services''. SYS_POSIX_TERMIOS: See ``System Services''. SYS_RESTARTABLE_SYSCALLS: See ``Obsolete Macros''. SYS_SIGLIST_DECLARED: See ``Obsolete Macros''. TEMPLATE: See ``Autoheader Macros''. TEST_CPP: See ``Obsolete Macros''. TEST_PROGRAM: See ``Obsolete Macros''. TIME_WITH_SYS_TIME: See ``Obsolete Macros''. TIMEZONE: See ``Obsolete Macros''. TOP: See ``Autoheader Macros''. TRY_COMPILE: See ``Obsolete Macros''. TRY_CPP: See ``Obsolete Macros''. TRY_LINK: See ``Obsolete Macros''. TRY_LINK_FUNC: See ``Obsolete Macros''. TRY_RUN: See ``Obsolete Macros''. TYPE_GETGROUPS: See ``Particular Type Checks''. TYPE_MBSTATE_T: See ``Particular Type Checks''. TYPE_MODE_T: See ``Particular Type Checks''. TYPE_OFF_T: See ``Particular Type Checks''. TYPE_PID_T: See ``Particular Type Checks''. TYPE_SIGNAL: See ``Particular Type Checks''. TYPE_SIZE_T: See ``Particular Type Checks''. TYPE_UID_T: See ``Particular Type Checks''. UID_T: See ``Obsolete Macros''. UNISTD_H: See ``Obsolete Macros''. USG: See ``Obsolete Macros''. UTIME_NULL: See ``Obsolete Macros''. VALIDATE_CACHED_SYSTEM_TUPLE: See ``Obsolete Macros''. VERBATIM: See ``Autoheader Macros''. VERBOSE: See ``Obsolete Macros''. VFORK: See ``Obsolete Macros''. VPRINTF: See ``Obsolete Macros''. WAIT3: See ``Obsolete Macros''. WARN: See ``Obsolete Macros''. WARNING: See ``Reporting Messages''. WITH: See ``Working With External Software''. WORDS_BIGENDIAN: See ``Obsolete Macros''. XENIX_DIR: See ``Obsolete Macros''. YYTEXT_POINTER: See ``Obsolete Macros''. M4 Macro Index ============== This is an alphabetical list of the M4, M4sugar, and M4sh macros. To make the list easier to use, the macros are listed without their preceding `m4_' or `AS_'. bpatsubst: See ``Redefined M4 Macros''. bregexp: See ``Redefined M4 Macros''. defn: See ``Redefined M4 Macros''. DIRNAME: See ``Programming in M4sh''. dnl: See ``Redefined M4 Macros''. dquote: See ``Evaluation Macros''. m4_exit: See ``Redefined M4 Macros''. m4_if: See ``Redefined M4 Macros''. m4_wrap: See ``Redefined M4 Macros''. MKDIR_P: See ``Programming in M4sh''. pattern_allow: See ``Forbidden Patterns''. pattern_forbid: See ``Forbidden Patterns''. quote: See ``Evaluation Macros''. undefine: See ``Redefined M4 Macros''. Autotest Macro Index ==================== This is an alphabetical list of the Autotest macros. To make the list easier to use, the macros are listed without their preceding `AT_'. CHECK: See ``Writing `testsuite.at'''. CLEANUP: See ``Writing `testsuite.at'''. DATA: See ``Writing `testsuite.at'''. INIT: See ``Writing `testsuite.at'''. KEYWORDS: See ``Writing `testsuite.at'''. SETUP: See ``Writing `testsuite.at'''. TESTED: See ``Writing `testsuite.at'''. Program and Function Index ========================== This is an alphabetical list of the programs and functions which portability is discussed in this document. !: See ``Limitations of Shell Builtins''. .: See ``Limitations of Shell Builtins''. /usr/xpg4/bin/sh on Solaris: See ``Shellology''. alloca: See ``Particular Function Checks''. awk: See ``Limitations of Usual Tools''. break: See ``Limitations of Shell Builtins''. case: See ``Limitations of Shell Builtins''. cat: See ``Limitations of Usual Tools''. cd: See ``Limitations of Shell Builtins''. chown: See ``Particular Function Checks''. closedir: See ``Particular Function Checks''. cmp: See ``Limitations of Usual Tools''. cp: See ``Limitations of Usual Tools''. date: See ``Limitations of Usual Tools''. diff: See ``Limitations of Usual Tools''. dirname: See ``Limitations of Usual Tools''. echo: See ``Limitations of Shell Builtins''. egrep: See ``Limitations of Usual Tools''. error_at_line: See ``Particular Function Checks''. exit: See ``Limitations of Shell Builtins''. export: See ``Limitations of Shell Builtins''. expr: See ``Limitations of Usual Tools''. expr (|): See ``Limitations of Usual Tools''. false: See ``Limitations of Shell Builtins''. fgrep: See ``Limitations of Usual Tools''. fnmatch: See ``Particular Function Checks''. for: See ``Limitations of Shell Builtins''. fork: See ``Particular Function Checks''. fseeko: See ``Particular Function Checks''. getgroups: See ``Particular Function Checks''. getloadavg: See ``Particular Function Checks''. getmntent: See ``Particular Function Checks''. getpgid: See ``Particular Function Checks''. getpgrp: See ``Particular Function Checks''. grep: See ``Limitations of Usual Tools''. if: See ``Limitations of Shell Builtins''. ln: See ``Limitations of Usual Tools''. ls: See ``Limitations of Usual Tools''. lstat: See ``Particular Function Checks''. malloc: See ``Particular Function Checks''. mbrtowc: See ``Particular Function Checks''. memcmp: See ``Particular Function Checks''. mkdir: See ``Limitations of Usual Tools''. mktime: See ``Particular Function Checks''. mmap: See ``Particular Function Checks''. mv: See ``Limitations of Usual Tools''. pwd: See ``Limitations of Shell Builtins''. realloc: See ``Particular Function Checks''. sed: See ``Limitations of Usual Tools''. sed (t): See ``Limitations of Usual Tools''. select: See ``Particular Function Checks''. set: See ``Limitations of Shell Builtins''. setpgrp: See ``Particular Function Checks''. setvbuf: See ``Particular Function Checks''. shift: See ``Limitations of Shell Builtins''. snprintf: See ``Portability of C Functions''. source: See ``Limitations of Shell Builtins''. sprintf: See ``Portability of C Functions''. sscanf: See ``Portability of C Functions''. stat: See ``Particular Function Checks''. strcoll: See ``Particular Function Checks''. strerror_r: See ``Particular Function Checks''. strftime: See ``Particular Function Checks''. strnlen <1>: See ``Particular Function Checks''. strnlen: See ``Portability of C Functions''. strtod: See ``Particular Function Checks''. test: See ``Limitations of Shell Builtins''. touch: See ``Limitations of Usual Tools''. trap: See ``Limitations of Shell Builtins''. true: See ``Limitations of Shell Builtins''. unlink: See ``Portability of C Functions''. unset: See ``Limitations of Shell Builtins''. utime: See ``Particular Function Checks''. va_copy: See ``Portability of C Functions''. va_list: See ``Portability of C Functions''. vfork: See ``Particular Function Checks''. vprintf: See ``Particular Function Checks''. vsnprintf: See ``Portability of C Functions''. vsprintf: See ``Portability of C Functions''. Concept Index ============= This is an alphabetical list of the files, tools, and concepts introduced in this document. "$@": See ``Shell Substitutions''. $(COMMANDS): See ``Shell Substitutions''. $<, explicit rules, and VPATH: See ``Limitations of Make''. $<, inference rules, and VPATH: See ``Limitations of Make''. $U: See ```AC_LIBOBJ' vs. `LIBOBJS'''. ${VAR=EXPANDED-VALUE}: See ``Shell Substitutions''. ${VAR=LITERAL}: See ``Shell Substitutions''. @&t@: See ``Quadrigraphs''. @S|@: See ``Quadrigraphs''. _m4_divert_diversion: See ``New Macros''. `COMMANDS`: See ``Shell Substitutions''. acconfig.h: See ```acconfig.h'''. aclocal.m4: See ``Making `configure' Scripts''. Ash: See ``Shellology''. autoconf: See ``Using `autoconf' to Create `configure'''. autoheader: See ``Using `autoheader' to Create `config.h.in'''. Autom4te Library: See ``Invoking `autom4te'''. autom4te.cache: See ``Invoking `autom4te'''. autom4te.cfg: See ``Invoking `autom4te'''. Automake: See ``Automake''. automatic rule rewriting and VPATH: See ``Limitations of Make''. autoreconf: See ``Using `autoreconf' to Update `configure' Scripts''. autoscan: See ``Using `autoscan' to Create `configure.ac'''. Autotest: See ``Generating Test Suites with Autotest''. AUTOTEST_PATH: See ``Running `testsuite' Scripts''. autoupdate: See ``Using `autoupdate' to Modernize `configure.ac'''. Back trace <1>: See ``Invoking `autom4te'''. Back trace: See ``Using `autoconf' to Create `configure'''. Bash: See ``Shellology''. Bash 2.05 and later: See ``Shellology''. BSD make and obj/: See ``Limitations of Make''. Cache: See ``Caching Results''. Cache variable: See ``Cache Variable Names''. Cache, enabling: See ```configure' Invocation''. Command Substitution: See ``Shell Substitutions''. Comments in Makefile rules: See ``Limitations of Make''. config.h: See ``Configuration Header Files''. config.h.bot: See ```acconfig.h'''. config.h.in: See ``Configuration Header Templates''. config.h.top: See ```acconfig.h'''. config.status: See ``Recreating a Configuration''. config.sub: See ``Specifying the System Type''. Configuration Header: See ``Configuration Header Files''. Configuration Header Template: See ``Configuration Header Templates''. configure <1>: See ``Running `configure' Scripts''. configure: See ``Making `configure' Scripts''. configure.ac: See ``Making `configure' Scripts''. configure.in: See ``Making `configure' Scripts''. Copyright Notice: See ``Notices in `configure'''. Darwin: See ``Systemology''. Declaration, checking: See ``Declarations''. dnl <1>: See ``Coding Style''. dnl: See ``Macro Definitions''. double-colon rules and VPATH: See ``Limitations of Make''. Endianness: See ``C Compiler Characteristics''. explicit rules, $<, and VPATH: See ``Limitations of Make''. FDL, GNU Free Documentation License: See ``GNU Free Documentation License''. File, checking: See ``Files''. Function, checking: See ``Particular Function Checks''. Header, checking: See ``Header Files''. ifnames: See ``Using `ifnames' to List Conditionals''. Includes, default: See ``Default Includes''. Instantiation: See ``Outputting Files''. Language: See ``Language Choice''. Library, checking: See ``Library Files''. Libtool: See ``Libtool''. Links: See ``Creating Configuration Links''. Listing directories: See ``Limitations of Usual Tools''. M4sugar: See ``Programming in M4sugar''. Macro invocation stack <1>: See ``Invoking `autom4te'''. Macro invocation stack: See ``Using `autoconf' to Create `configure'''. make -k: See ``Limitations of Make''. make and SHELL: See ``Limitations of Make''. Makefile rules and comments: See ``Limitations of Make''. Making directories: See ``Limitations of Usual Tools''. Messages, from autoconf: See ``Reporting Messages''. Messages, from configure: See ``Printing Messages''. Moving open files: See ``Limitations of Usual Tools''. obj/, subdirectory: See ``Limitations of Make''. obstack: See ``Particular Function Checks''. package.m4: See ``Making `testsuite' Scripts''. POSIX termios headers: See ``System Services''. prerequisite directories and VPATH: See ``Limitations of Make''. Previous Variable: See ``Setting Output Variables''. Programs, checking: See ``Alternative Programs''. QNX 4.25: See ``Systemology''. quadrigraphs: See ``Quadrigraphs''. quotation <1>: See ``M4 Quotation''. quotation: See ``The Autoconf Language''. Revision: See ``Notices in `configure'''. Rule, Single Suffix Inference: See ``Limitations of Make''. Separated Dependencies: See ``Limitations of Make''. SHELL and make: See ``Limitations of Make''. Single Suffix Inference Rule: See ``Limitations of Make''. Structure, checking: See ``Structures''. suffix rules, $<, and VPATH: See ``Limitations of Make''. Symbolic links: See ``Limitations of Usual Tools''. termios POSIX headers: See ``System Services''. test group: See ```testsuite' Scripts''. testsuite <1>: See ``Running `testsuite' Scripts''. testsuite: See ```testsuite' Scripts''. Tru64: See ``Systemology''. undefined macro: See ``New Macros''. Unix version 7: See ``Systemology''. V7: See ``Systemology''. Variable, Precious: See ``Setting Output Variables''. Version: See ``Notices in `configure'''. VPATH: See ``Limitations of Make''. VPATH and automatic rule rewriting: See ``Limitations of Make''. VPATH and double-colon rules: See ``Limitations of Make''. VPATH and prerequisite directories: See ``Limitations of Make''. VPATH, explicit rules, and $<: See ``Limitations of Make''. VPATH, inference rules, and $<: See ``Limitations of Make''. VPATH, resolving target pathnames: See ``Limitations of Make''. Zsh: See ``Shellology''.