This is the sample initialization file, as given in the distribution. It is divided in two section--one for global usage (suitable for global startup file), and one for local usage (suitable for `$HOME/.wgetrc'). Be careful about the things you change.
Note that almost all the lines are commented out. For a command to have any effect, you must remove the `#' character at the beginning of its line.
### ### Sample Wget initialization file .wgetrc ### ## You can use this file to change the default behaviour of wget or to ## avoid having to type many many command-line options. This file does ## not contain a comprehensive list of commands -- look at the manual ## to find out what you can put into this file. ## ## Wget initialization file can reside in /usr/local/etc/wgetrc ## (global, for all users) or $HOME/.wgetrc (for a single user). ## ## To use the settings in this file, you will have to uncomment them, ## as well as change them, in most cases, as the values on the ## commented-out lines are the default values (e.g. "off"). ## ## Global settings (useful for setting up in /usr/local/etc/wgetrc). ## Think well before you change them, since they may reduce wget's ## functionality, and make it behave contrary to the documentation: ## # You can set retrieve quota for beginners by specifying a value # optionally followed by 'K' (kilobytes) or 'M' (megabytes). The # default quota is unlimited. #quota = inf # You can lower (or raise) the default number of retries when # downloading a file (default is 20). #tries = 20 # Lowering the maximum depth of the recursive retrieval is handy to # prevent newbies from going too "deep" when they unwittingly start # the recursive retrieval. The default is 5. #reclevel = 5 # Many sites are behind firewalls that do not allow initiation of # connections from the outside. On these sites you have to use the # `passive' feature of FTP. If you are behind such a firewall, you # can turn this on to make Wget use passive FTP by default. #passive_ftp = off # The "wait" command below makes Wget wait between every connection. # If, instead, you want Wget to wait only between retries of failed # downloads, set waitretry to maximum number of seconds to wait (Wget # will use "linear backoff", waiting 1 second after the first failure # on a file, 2 seconds after the second failure, etc. up to this max). waitretry = 10 ## ## Local settings (for a user to set in his $HOME/.wgetrc). It is ## *highly* undesirable to put these settings in the global file, since ## they are potentially dangerous to "normal" users. ## ## Even when setting up your own ~/.wgetrc, you should know what you ## are doing before doing so. ## # Set this to on to use timestamping by default: #timestamping = off # It is a good idea to make Wget send your email address in a `From:' # header with your request (so that server administrators can contact # you in case of errors). Wget does *not* send `From:' by default. #header = From: Your Name <username@site.domain> # You can set up other headers, like Accept-Language. Accept-Language # is *not* sent by default. #header = Accept-Language: en # You can set the default proxies for Wget to use for http and ftp. # They will override the value in the environment. #http_proxy = http://proxy.yoyodyne.com:18023/ #ftp_proxy = http://proxy.yoyodyne.com:18023/ # If you do not want to use proxy at all, set this to off. #use_proxy = on # You can customize the retrieval outlook. Valid options are default, # binary, mega and micro. #dot_style = default # Setting this to off makes Wget not download /robots.txt. Be sure to # know *exactly* what /robots.txt is and how it is used before changing # the default! #robots = on # It can be useful to make Wget wait between connections. Set this to # the number of seconds you want Wget to wait. #wait = 0 # You can force creating directory structure, even if a single is being # retrieved, by setting this to on. #dirstruct = off # You can turn on recursive retrieving by default (don't do this if # you are not sure you know what it means) by setting this to on. #recursive = off # To always back up file X as X.orig before converting its links (due # to -k / --convert-links / convert_links = on having been specified), # set this variable to on: #backup_converted = off # To have Wget follow FTP links from HTML files by default, set this # to on: #follow_ftp = off
Go to the first, previous, next, last section, table of contents.