config interface loopback
	option 'ifname'	'lo'
	option 'proto'	'static'
	option 'ipaddr'	'127.0.0.1'
	option 'netmask'	'255.0.0.0'

config interface se00
	option 'ifname'	'se00'
	option 'proto'	'static'
	option 'ipaddr'	'172.28.1.1'
	option 'netmask'	'255.255.255.224'

config interface ge00
	option 'ifname'	'ge00'
	option 'proto'	'none'
	option 'ip6addr'	'2001:db8:0:1::3/64'
	option 'ip6gw'	'2001:db8::/32'
	option 'dns' '2001:db8:0:1::1'
	
config interface sw00
	option 'type' 'none'
	option 'proto'	'static'
	option 'ipaddr' '172.28.1.65'
	option 'netmask'	'255.255.255.224'

config interface sw10
	option 'type' 'none'
	option 'proto'	'static'
	option 'ipaddr'	'172.28.1.97'
	option 'netmask' '255.255.255.224'

config switch
	option name	rtl8366s
	option reset	1
	option enable_vlan 0
	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
	option blinkrate	2
	option max_length 3

config switch_vlan
	option device	rtl8366s
	option vlan 	1
	option ports	"0 1 2 3 5t"

config switch_port
	# Port 1 controls the GREEN configuration of LEDs for
	# the switch and the section does not correspond to a real
	# switch port.
	#
	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3=1000 Mb/s;
	# 4=100 Mb/s; 5=10 Mb/s; 6=1000 Mb/s+activity; 7=100 Mb/s+activity;
	# 8=10 Mb/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
	# 14: Link (master); 15: separate register

	option device		rtl8366s
	option port		1
	option led		6

config switch_port
	# Port 2 controls the ORANGE configuration of LEDs for
	# the switch and the section does not correspond to a real
	# switch port.
	#
	# See the key above for switch port 1 for the meaning of the
	# 'led' setting below.
	
	option device		rtl8366s
	option port		2
	option led		9

config switch_port                                              
	# Port 5 controls the configuration of the WAN LED and the
	# section does not correspond to a real switch port.
	#
	# To toggle the use of green or orange LEDs for the WAN port,
	# see the LED setting for wndr3700:green:wan in /etc/config/system.
	#
	# See the key above for switch port 1 for the meaning of the
	# 'led' setting below.

	option device		rtl8366s
	option port		5
	option led		2

config 'interface' 'gw00'
	option 'type' 'none'
	option 'proto' 'static'
	option 'ipaddr' '172.28.1.129'
	option 'netmask' '255.255.255.224'

config 'interface' 'gw10'
	option 'type' 'none'
	option 'proto' 'static'
	option 'ipaddr' '172.28.1.161'
	option 'netmask' '255.255.255.224'

config 'interface' 'gw01'
	option 'proto' 'ahcp'

config 'interface' 'gw11'
	option 'proto' 'ahcp'

#config 'interface' 'ge01' 
#        option 'proto' '6to4' 
#        option 'adv_interface' 'se00 sw00 sw10 gw00 gw10'
#        option 'adv_subnet' '1'
#	option 'wan_device' 'ge00'
