/* * Copyright (C) 2004, 2007 Internet Systems Consortium, Inc. ("ISC") * Copyright (C) 2001, 2002 Internet Software Consortium. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES WITH * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT, * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR * PERFORMANCE OF THIS SOFTWARE. */ /* $Id: strerror.c,v 1.8 2007-06-19 23:47:19 tbox Exp $ */ #include #include #include #include #include #include #include #include #include /* * Forward declarations */ char * FormatError(int error); char * GetWSAErrorMessage(int errval); char * NTstrerror(int err, BOOL *bfreebuf); /* * We need to do this this way for profiled locks. */ static isc_mutex_t isc_strerror_lock; static void init_lock(void) { RUNTIME_CHECK(isc_mutex_init(&isc_strerror_lock) == ISC_R_SUCCESS); } /* * This routine needs to free up any buffer allocated by FormatMessage * if that routine gets used. */ void isc__strerror(int num, char *buf, size_t size) { char *msg; BOOL freebuf; unsigned int unum = num; static isc_once_t once = ISC_ONCE_INIT; REQUIRE(buf != NULL); RUNTIME_CHECK(isc_once_do(&once, init_lock) == ISC_R_SUCCESS); LOCK(&isc_strerror_lock); freebuf = FALSE; msg = NTstrerror(num, &freebuf); if (msg != NULL) snprintf(buf, size, "%s", msg); else snprintf(buf, size, "Unknown error: %u", unum); if(freebuf && msg != NULL) { LocalFree(msg); } UNLOCK(&isc_strerror_lock); } /* * Note this will cause a memory leak unless the memory allocated here * is freed by calling LocalFree. isc__strerror does this before unlocking. * This only gets called if there is a system type of error and will likely * be an unusual event. */ char * FormatError(int error) { LPVOID lpMsgBuf = NULL; FormatMessage( FORMAT_MESSAGE_ALLOCATE_BUFFER | FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS, NULL, error, /* Default language */ MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT), (LPTSTR) &lpMsgBuf, 0, NULL); return (lpMsgBuf); } /* * This routine checks the error value and calls the WSA Windows Sockets * Error message function GetWSAErrorMessage below if it's within that range * since those messages are not available in the system error messages. */ char * NTstrerror(int err, BOOL *bfreebuf) { char *retmsg = NULL; /* Copy the error value first in case of other errors */ DWORD errval = err; *bfreebuf = FALSE; /* Get the Winsock2 error messages */ if (errval >= WSABASEERR && errval <= (WSABASEERR + 1015)) { retmsg = GetWSAErrorMessage(errval); if (retmsg != NULL) return (retmsg); } /* * If it's not one of the standard Unix error codes, * try a system error message */ if (errval > (DWORD) _sys_nerr) { *bfreebuf = TRUE; return (FormatError(errval)); } else { return (strerror(errval)); } } /* * This is a replacement for perror */ void __cdecl NTperror(char *errmsg) { /* Copy the error value first in case of other errors */ int errval = errno; BOOL bfreebuf = FALSE; char *msg; msg = NTstrerror(errval, &bfreebuf); fprintf(stderr, "%s: %s\n", errmsg, msg); if(bfreebuf == TRUE) { LocalFree(msg); } } /* * Return the error string related to Winsock2 errors. * This function is necessary since FormatMessage knows nothing about them * and there is no function to get them. */ char * GetWSAErrorMessage(int errval) { char *msg; switch (errval) { case WSAEINTR: msg = "Interrupted system call"; break; case WSAEBADF: msg = "Bad file number"; break; case WSAEACCES: msg = "Permission denied"; break; case WSAEFAULT: msg = "Bad address"; break; case WSAEINVAL: msg = "Invalid argument"; break; case WSAEMFILE: msg = "Too many open sockets"; break; case WSAEWOULDBLOCK: msg = "Operation would block"; break; case WSAEINPROGRESS: msg = "Operation now in progress"; break; case WSAEALREADY: msg = "Operation already in progress"; break; case WSAENOTSOCK: msg = "Socket operation on non-socket"; break; case WSAEDESTADDRREQ: msg = "Destination address required"; break; case WSAEMSGSIZE: msg = "Message too long"; break; case WSAEPROTOTYPE: msg = "Protocol wrong type for socket"; break; case WSAENOPROTOOPT: msg = "Bad protocol option"; break; case WSAEPROTONOSUPPORT: msg = "Protocol not supported"; break; case WSAESOCKTNOSUPPORT: msg = "Socket type not supported"; break; case WSAEOPNOTSUPP: msg = "Operation not supported on socket"; break; case WSAEPFNOSUPPORT: msg = "Protocol family not supported"; break; case WSAEAFNOSUPPORT: msg = "Address family not supported"; break; case WSAEADDRINUSE: msg = "Address already in use"; break; case WSAEADDRNOTAVAIL: msg = "Can't assign requested address"; break; case WSAENETDOWN: msg = "Network is down"; break; case WSAENETUNREACH: msg = "Network is unreachable"; break; case WSAENETRESET: msg = "Net connection reset"; break; case WSAECONNABORTED: msg = "Software caused connection abort"; break; case WSAECONNRESET: msg = "Connection reset by peer"; break; case WSAENOBUFS: msg = "No buffer space available"; break; case WSAEISCONN: msg = "Socket is already connected"; break; case WSAENOTCONN: msg = "Socket is not connected"; break; case WSAESHUTDOWN: msg = "Can't send after socket shutdown"; break; case WSAETOOMANYREFS: msg = "Too many references: can't splice"; break; case WSAETIMEDOUT: msg = "Connection timed out"; break; case WSAECONNREFUSED: msg = "Connection refused"; break; case WSAELOOP: msg = "Too many levels of symbolic links"; break; case WSAENAMETOOLONG: msg = "File name too long"; break; case WSAEHOSTDOWN: msg = "Host is down"; break; case WSAEHOSTUNREACH: msg = "No route to host"; break; case WSAENOTEMPTY: msg = "Directory not empty"; break; case WSAEPROCLIM: msg = "Too many processes"; break; case WSAEUSERS: msg = "Too many users"; break; case WSAEDQUOT: msg = "Disc quota exceeded"; break; case WSAESTALE: msg = "Stale NFS file handle"; break; case WSAEREMOTE: msg = "Too many levels of remote in path"; break; case WSASYSNOTREADY: msg = "Network system is unavailable"; break; case WSAVERNOTSUPPORTED: msg = "Winsock version out of range"; break; case WSANOTINITIALISED: msg = "WSAStartup not yet called"; break; case WSAEDISCON: msg = "Graceful shutdown in progress"; break; /* case WSAHOST_NOT_FOUND: msg = "Host not found"; break; case WSANO_DATA: msg = "No host data of that type was found"; break; */ default: msg = NULL; break; } return (msg); } /* * These error messages are more informative about CryptAPI Errors than the * standard error messages */ char * GetCryptErrorMessage(int errval) { char *msg; switch (errval) { case NTE_BAD_FLAGS: msg = "The dwFlags parameter has an illegal value."; break; case NTE_BAD_KEYSET: msg = "The Registry entry for the key container " "could not be opened and may not exist."; break; case NTE_BAD_KEYSET_PARAM: msg = "The pszContainer or pszProvider parameter " "is set to an illegal value."; break; case NTE_BAD_PROV_TYPE: msg = "The value of the dwProvType parameter is out " "of range. All provider types must be from " "1 to 999, inclusive."; break; case NTE_BAD_SIGNATURE: msg = "The provider DLL signature did not verify " "correctly. Either the DLL or the digital " "signature has been tampered with."; break; case NTE_EXISTS: msg = "The dwFlags parameter is CRYPT_NEWKEYSET, but the key" " container already exists."; break; case NTE_KEYSET_ENTRY_BAD: msg = "The Registry entry for the pszContainer key container " "was found (in the HKEY_CURRENT_USER window), but is " "corrupt. See the section System Administration for " " etails about CryptoAPI's Registry usage."; break; case NTE_KEYSET_NOT_DEF: msg = "No Registry entry exists in the HKEY_CURRENT_USER " "window for the key container specified by " "pszContainer."; break; case NTE_NO_MEMORY: msg = "The CSP ran out of memory during the operation."; break; case NTE_PROV_DLL_NOT_FOUND: msg = "The provider DLL file does not exist or is not on the " "current path."; break; case NTE_PROV_TYPE_ENTRY_BAD: msg = "The Registry entry for the provider type specified by " "dwProvType is corrupt. This error may relate to " "either the user default CSP list or the machine " "default CSP list. See the section System " "Administration for details about CryptoAPI's " "Registry usage."; break; case NTE_PROV_TYPE_NO_MATCH: msg = "The provider type specified by dwProvType does not " "match the provider type found in the Registry. Note " "that this error can only occur when pszProvider " "specifies an actual CSP name."; break; case NTE_PROV_TYPE_NOT_DEF: msg = "No Registry entry exists for the provider type " "specified by dwProvType."; break; case NTE_PROVIDER_DLL_FAIL: msg = "The provider DLL file could not be loaded, and " "may not exist. If it exists, then the file is " "not a valid DLL."; break; case NTE_SIGNATURE_FILE_BAD: msg = "An error occurred while loading the DLL file image, " "prior to verifying its signature."; break; default: msg = NULL; break; } return msg; }