REPEATER-MIB DEFINITIONS ::= BEGIN -- ctron-rrev4-mib.txt -- Revision: 1.30 -- Date: August 14, 1992 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise-specific repeater MIB. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright August 92 Cabletron Systems IMPORTS enterprises, NetworkAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- Formal definitions for Repeater cabletron OBJECT IDENTIFIER ::= { enterprises 52 } mibs OBJECT IDENTIFIER ::= { cabletron 4 } ctron OBJECT IDENTIFIER ::= { mibs 1 } ctphysical OBJECT IDENTIFIER ::= { ctron 1 } -- Repeater Node -- The following branch in the repeater MIB tree pertains to the repeater -- as a whole repeater OBJECT IDENTIFIER ::= {ctphysical 1 } repeaterRev4 OBJECT IDENTIFIER ::= { repeater 4 } -- -- Repeater Management Object Definitions rptr OBJECT IDENTIFIER ::= { repeaterRev4 1 } rptrMgmt OBJECT IDENTIFIER ::= { rptr 1 } -- This section defines the management objects under the Repeater node. -- The implementation of this group of objects is mandatory. rptrMgmtName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) ACCESS read-write STATUS mandatory DESCRIPTION "The ASCII name assigned to this network." ::= {rptrMgmt 1} rptrMgmtPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of ports residing on this lan segment." ::= {rptrMgmt 2} rptrMgmtPortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= {rptrMgmt 3} rptrMgmtPortsOn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get the total number of ON ports in this network." ::= {rptrMgmt 4} rptrMgmtPortsOper OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get the number of operational ports in this network." ::= {rptrMgmt 5} -- rptrMgmtBoardMap OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get a map of the chassis slots occupied by the boards in this network." ::= {rptrMgmt 6} rptrMgmtInterfaceNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get the MIBII interface number of this network. A return of zero will mean this network is not associated with a MIBII interface." ::= {rptrMgmt 7} -- Repeater Packet Statistical Object Definitions rptrStats OBJECT IDENTIFIER ::= { rptr 2 } -- This section defines the packet statistical objects under the -- Repeater node. -- The implementation of this group of objects is mandatory. rptrPktStats OBJECT IDENTIFIER ::= { rptrStats 1 } rptrPktStatsPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received packets." ::= {rptrPktStats 1} rptrPktStatsBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received bytes." ::= {rptrPktStats 2} rptrPktStatsColls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total collisions." ::= {rptrPktStats 3} -- rptrPktStatsErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total errors." ::= {rptrPktStats 4} rptrPktStatsAlign OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total frame alignment errors." ::= {rptrPktStats 5} rptrPktStatsCRC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total CRC errors." ::= {rptrPktStats 6} rptrPktStatsOOW OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total out-of-window collisions." ::= {rptrPktStats 7} rptrPktStatsNoRsc OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This counter is the number of packets on this network that the hardware has processed that the management has either not seen yet, in the case of an active network, or has missed missed all together, in the case of a once active network." ::= {rptrPktStats 8} -- Repeater Protocol Statistical Object Definitions -- This section defines the protocol statistical objects under the -- Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrProtocols OBJECT IDENTIFIER ::= { rptrStats 2 } rptrProtocolsOSI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received OSI packets." ::= {rptrProtocols 1} -- rptrProtocolsNovell OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received Novell packets." ::= {rptrProtocols 2} rptrProtocolsBanyan OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received Banyan packets." ::= {rptrProtocols 3} rptrProtocolsDECNet OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received DECNet packets." ::= {rptrProtocols 4} rptrProtocolsXNS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received XNS packets." ::= {rptrProtocols 5} rptrProtocolsIP OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received TCP/IP packets." ::= {rptrProtocols 6} rptrProtocolsCtron OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received CTRON Management packets." ::= {rptrProtocols 7} rptrProtocolsAppletalk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received Appletalk packets." ::= {rptrProtocols 8} -- rptrProtocolsOther OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received unknown protocol packets." ::= {rptrProtocols 9} -- Repeater Frame Size Statistical Object Definitions rptrFrameSizes OBJECT IDENTIFIER ::= { rptrStats 3 } -- This section defines the frame size statistical objects under the -- Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrFrameSzRunt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received packets of size less than 64 bytes." ::= {rptrFrameSizes 1} rptrFrameSz64To127 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received packets of size between 64 and 127 bytes." ::= {rptrFrameSizes 2} rptrFrameSz128To255 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received packets of size between 128 and 255 bytes." ::= {rptrFrameSizes 3} rptrFrameSz256To511 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received packets of size between 256 and 511 bytes." ::= {rptrFrameSizes 4} -- rptrFrameSz512To1023 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received packets of size between 512 and 1023 bytes." ::= {rptrFrameSizes 5} rptrFrameSz1024To1518 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received packets of size between 1024 and 1518 bytes." ::= {rptrFrameSizes 6} rptrFrameSzGiant OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this repeater's total received packets of size greater than 1518 bytes." ::= {rptrFrameSizes 7} -- Repeater Alarm Object Definitions rptrAlarms OBJECT IDENTIFIER ::= { rptr 3 } -- This section defines the alarm objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrAlarmsTrafEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms." ::= {rptrAlarms 1} rptrAlarmsTrafThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set packet threshold within the timebase that will cause an alarm." ::= {rptrAlarms 2} -- rptrAlarmsCollEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms." ::= {rptrAlarms 3} rptrAlarmsCollThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the number of collisions per good packet within the timebase that will cause an alarm." ::= {rptrAlarms 4} rptrAlarmsErrEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms." ::= {rptrAlarms 5} rptrAlarmsErrThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the percentage of errors per good packet within the timebase that will cause an alarm." ::= {rptrAlarms 6} rptrAlarmsErrSource OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 No_resource - Bit 4 Giants - Bit 5" ::= {rptrAlarms 7} -- rptrAlarmsAlarmTimebase OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set alarm timebase." ::= {rptrAlarms 8} -- Repeater Redundancy Object Definitions -- Repeater redundancy as a whole is an optional implementation. -- However, if any group concerning redundancy is implemented, all -- of the groups involved in the redundancy implementation must be -- provided. rptrRedundancy OBJECT IDENTIFIER ::= { rptr 4 } -- This section defines the redundancy objects under the Repeater node. rptrRedund OBJECT IDENTIFIER ::= { rptrRedundancy 1 } rptrRedundReset OBJECT-TYPE SYNTAX INTEGER { noReset(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is set to Reset it will cause a reset of the redundancy object to occur. Setting this object to NoReset will do nothing. This object will always be read as NoReset." ::= {rptrRedund 1} rptrRedundPollInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the number of seconds between polls for redundancy." ::= {rptrRedund 2} rptrRedundTestTOD OBJECT-TYPE SYNTAX DisplayString (SIZE(8)) ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the time of day at which the redundant circuits will be tested. The format of the time string is hh:mm:ss." ::= {rptrRedund 3} -- rptrRedundPerformTest OBJECT-TYPE SYNTAX INTEGER { noTest(1), test(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is set to Test it will cause a test of the redundant circuits to be performed. Setting this object to NoTest will have no effect. When read this object will always return NoTest." ::= {rptrRedund 4} rptrRedundMaxCrcts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the maximum number of circuits which may exist on this network." ::= {rptrRedund 5} -- Repeater Redundant Circuit Object Definitions -- This section defines a table of redundant circuit objects under the Repeater node. rptrRedundCrctTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrRedundCrctEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of redundant circuit objects for this repeater." ::= { rptrRedundancy 2 } rptrRedundCrctEntry OBJECT-TYPE SYNTAX RptrRedundCrctEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of objects for a particular redundant circuit." INDEX { rptrRedundCrctId } ::= { rptrRedundCrctTable 1 } -- RptrRedundCrctEntry ::= SEQUENCE { rptrRedundCrctId INTEGER, rptrRedundCrctName OCTET STRING, rptrRedundCrctRetrys INTEGER, rptrRedundCrctNumBPs INTEGER, rptrRedundCrctNumAddr INTEGER, rptrRedundCrctAddAddr NetworkAddress, rptrRedundCrctDelAddr NetworkAddress, rptrRedundCrctEnable INTEGER, rptrRedundCrctReset INTEGER } rptrRedundCrctId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the index for a member circuit in the table of redundant circuits." ::= {rptrRedundCrctEntry 1} rptrRedundCrctName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the name of the indicated circuit." ::= {rptrRedundCrctEntry 2} rptrRedundCrctRetrys OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the the number of unanswered polls allowed for the circuit." ::= {rptrRedundCrctEntry 3} rptrRedundCrctNumBPs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get the number of board/port combinations associated with the circuit." ::= {rptrRedundCrctEntry 4} -- rptrRedundCrctNumAddr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get the number of IP Addresses associated with the circuit." ::= {rptrRedundCrctEntry 5} rptrRedundCrctAddAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "Add an IP Address to the polling list for the indicated circuit." ::= {rptrRedundCrctEntry 6} rptrRedundCrctDelAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "Delete an IP Address from the polling list of the indicated circuit." ::= {rptrRedundCrctEntry 7} rptrRedundCrctEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is set to Enable, the circuit is enabled. If this object is set to Disable, the circuit is disbabled. When read, this object returns the state of the object based on the last request made." ::= {rptrRedundCrctEntry 8} rptrRedundCrctReset OBJECT-TYPE SYNTAX INTEGER { noReset(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object is set to Reset, the circuit is reset. All of the circuit's associated boards and ports are returned to NOT_USED, any associated IP Addresses are purged from the circuit's address list, the name is cleared, and the retry count is reset to a default value. Setting this object to NoReset has no effect. When read, NoReset is always returned." ::= {rptrRedundCrctEntry 9} -- -- Repeater Redundant Port Object Definitions -- This section defines a table of redundant port objects under the Repeater node. rptrRedundPortTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrRedundPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of redundant port objects for this repeater." ::= { rptrRedundancy 3 } rptrRedundPortEntry OBJECT-TYPE SYNTAX RptrRedundPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A redundant port entry containing objects pertaining to a particular redundant port." INDEX { rptrRedundPortId, rptrRedundPortCrctId } ::= { rptrRedundPortTable 1 } RptrRedundPortEntry ::= SEQUENCE { rptrRedundPortId INTEGER, rptrRedundPortCrctId INTEGER, rptrRedundPortNum INTEGER, rptrRedundPortBoardNum INTEGER, rptrRedundPortType INTEGER } rptrRedundPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value identifying an element in a sequence of member ports which belong to a circuit in the table of redundant circuits. This value is not a port number; rather it is a value which goes from 1 to the maximum number of ports which may be included in a redundant circuit." ::= {rptrRedundPortEntry 1} rptrRedundPortCrctId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId." ::= {rptrRedundPortEntry 2} -- rptrRedundPortNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the port number of a member port belonging to a redundant circuit." ::= {rptrRedundPortEntry 3} rptrRedundPortBoardNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the board number of a member port belonging to a redundant circuit." ::= {rptrRedundPortEntry 4} rptrRedundPortType OBJECT-TYPE SYNTAX INTEGER { notUsed(1), primary(2), backup(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Return the state of a port associated with the indicated circuit." ::= {rptrRedundPortEntry 5} -- Repeater Redundant IP Address Object Definitions -- This section defines a table of redundant IP Address objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrRedundAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrRedundAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrRedundancy 4 } rptrRedundAddrEntry OBJECT-TYPE SYNTAX RptrRedundAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrRedundAddrId, rptrRedundAddrCrctId } ::= { rptrRedundAddrTable 1 } -- RptrRedundAddrEntry ::= SEQUENCE { rptrRedundAddrId INTEGER, rptrRedundAddrCrctId INTEGER, rptrRedundAddrIPAddr NetworkAddress } rptrRedundAddrId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value identifying an element in a sequence of member IP Addresses which belong to a circuit in the table of redundant circuits. This value goes from 1 to the maximum number of IP Addresses which may be included in a redundant circuit." ::= {rptrRedundAddrEntry 1} rptrRedundAddrCrctId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value identifying a member circuit in the table of redundant circuits. This value is similar to rptrRedundCrctId." ::= {rptrRedundAddrEntry 2} rptrRedundAddrIPAddr OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "Returns an IP Address associated with the indicated circuit." ::= {rptrRedundAddrEntry 3} -- Repeater Source Address List Object Definitions -- Repeater Source Addressing List as a whole is an optional implementation. -- However, if any group of source addressing objects is implemented, the -- entire set of source addressing object groups must be implemented. rptrSourceAddress OBJECT IDENTIFIER ::= { rptr 5 } -- This section defines a table of Source Address List objects under the Repeater node. rptrSrcAddrListTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrSrcAddrListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrSourceAddress 1 } -- rptrSrcAddrListEntry OBJECT-TYPE SYNTAX RptrSrcAddrListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrSrcAddrListId } ::= { rptrSrcAddrListTable 1 } RptrSrcAddrListEntry ::= SEQUENCE { rptrSrcAddrListId INTEGER, rptrSrcAddrAddressList OCTET STRING } rptrSrcAddrListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index into a table of source address seen by this repeater." ::= {rptrSrcAddrListEntry 1} rptrSrcAddrAddressList OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "Returns a source address seen by this repeater." ::= {rptrSrcAddrListEntry 2} -- Repeater Source Address Source Object Definitions -- This section defines a table of Source Address Source objects under the Repeater node. rptrSrcAddrSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrSrcAddrSrcTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrSourceAddress 2 } rptrSrcAddrSrcTableEntry OBJECT-TYPE SYNTAX RptrSrcAddrSrcTableEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrSrcAddrSrcTableEntryId } ::= { rptrSrcAddrSrcTable 1 } -- RptrSrcAddrSrcTableEntry ::= SEQUENCE { rptrSrcAddrSrcTableEntryId OCTET STRING, rptrSrcAddrSrcTableEntryPort INTEGER, rptrSrcAddrSrcTableEntryPortGroup INTEGER } rptrSrcAddrSrcTableEntryId OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) ACCESS read-only STATUS mandatory DESCRIPTION "Returns the source address to which this table's information pertains." ::= {rptrSrcAddrSrcTableEntry 1} rptrSrcAddrSrcTableEntryPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the port# of the port that sourced the source address." ::= {rptrSrcAddrSrcTableEntry 2} rptrSrcAddrSrcTableEntryPortGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the port group# of the port that sourced the source address." ::= {rptrSrcAddrSrcTableEntry 3} -- Repeater Source Address Source Object Definitions -- This section defines a table of Source Address Source objects under the Repeater node. rptrSrcAddrMgmt OBJECT IDENTIFIER ::= { rptrSourceAddress 3 } rptrSrcAddrMgmtSrcAgeInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set source addressing ageing interval." ::= {rptrSrcAddrMgmt 1} -- rptrSrcAddrMgmtPortLock OBJECT-TYPE SYNTAX INTEGER { unlock(1), lock(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to Lock will activate the network port security lock." ::= {rptrSrcAddrMgmt 2} rptrSrcAddrMgmtActiveUsers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get the number of active users on this network." ::= {rptrSrcAddrMgmt 3} -- Repeater Port Group Node -- The following branch in the repeater MIB tree pertains to individual -- Repeater Port Group Node -- The following branch in the repeater MIB tree pertains to individual -- groups of repeater ports rptrPortGroup OBJECT IDENTIFIER ::= { repeaterRev4 2 } -- Repeater Port Group Management Object Definitions -- This section defines a table of Port Group Management objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortGrpMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortGrpMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPortGroup 1 } rptrPortGrpMgmtEntry OBJECT-TYPE SYNTAX RptrPortGrpMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortGrpMgmtGrpId } ::= { rptrPortGrpMgmtTable 1 } -- RptrPortGrpMgmtEntry ::= SEQUENCE  rptrPortGrpMgmtGrpId INTEGER, rptrPortGrpMgmtName INTEGER, rptrPortGrpMgmtPortCount INTEGER, rptrPortGrpMgmtPortsEnable INTEGER, rptrPortrpMgmtPortsOn INTEGER, rptrPortGrpMgmtPortsOper INTEGER } rptrPortGrpMgmtGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortGrpMgmtEntry 1} rptrPortGrpMgmtName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) ACCESS read-write STATUS mandatory DESCRIPTION "Gets/Sets a name for the specified port group." ::= {rptrPortGrpMgmtEntry 2} rptrPortGrpMgmtPortCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get total number of ports contained on the board." ::= {rptrPortGrpMgmtEntry 3} rptrPortGrpMgmtPortsEnable OBJECT-TYPE SYNTAX INTEGER { noEnable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to Enable will cause all the ports residing in this network segment to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable." ::= {rptrPortGrpMgmtEntry 4} -- rptrPortGrpMgmtPortsOn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get total number of ON ports on the board." ::= {rptrPortGrpMgmtEntry 5} rptrPortGrpMgmtPortsOper OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Get total number of operational ports on the board." ::= {rptrPortGrpMgmtEntry 6} -- Repeater Port Group Statistical Object Definitions rptrPortGrpStats OBJECT IDENTIFIER ::= { rptrPortGroup 2 } -- Repeater Port Group Packet Statistical Object Definitions -- This section defines a table of Port Group Packet Statistical objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortGrpPktStatsTbl OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortGrpPktStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPortGrpStats 1 } rptrPortGrpPktStatsEntry OBJECT-TYPE SYNTAX RptrPortGrpPktStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortGrpPktStatsId } ::= { rptrPortGrpPktStatsTbl 1 } -- RptrPortGrpPktStatsEntry ::= SEQUENCE { rptrPortGrpPktStatsId INTEGER, rptrPortGrpPktStatsPkts Counter, rptrPortGrpPktStatsBytes Counter, rptrPortGrpPktStatsColls Counter, rptrPortGrpPktStatsErrors Counter, rptrPortGrpPktStatsAlign Counter, rptrPortGrpPktStatsCRC Counter, rptrPortGrpPktStatsOOW Counter } rptrPortGrpPktStatsId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortGrpPktStatsEntry 1} rptrPortGrpPktStatsPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received packets." ::= {rptrPortGrpPktStatsEntry 2} rptrPortGrpPktStatsBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received bytes." ::= {rptrPortGrpPktStatsEntry 3} rptrPortGrpPktStatsColls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total collisions." ::= {rptrPortGrpPktStatsEntry 4} -- rptrPortGrpPktStatsErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total errors." ::= {rptrPortGrpPktStatsEntry 5} rptrPortGrpPktStatsAlign OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total frame alignment errors." ::= {rptrPortGrpPktStatsEntry 6} rptrPortGrpPktStatsCRC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total CRC errors." ::= {rptrPortGrpPktStatsEntry 7} rptrPortGrpPktStatsOOW OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total out-of-window collisions." ::= {rptrPortGrpPktStatsEntry 8} -- Repeater Port Group Protocol Statistical Object Definitions -- This section defines a table of Port Group Protocol Statistical objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortGrpProtocolTbl OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortGrpProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPortGrpStats 2 } rptrPortGrpProtocolEntry OBJECT-TYPE SYNTAX RptrPortGrpProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortGrpProtocolId } ::= { rptrPortGrpProtocolTbl 1 } -- RptrPortGrpProtocolEntry ::= SEQUENCE { rptrPortGrpProtocolId INTEGER, rptrPortGrpProtocolOSI Counter, rptrPortGrpProtocolNovell Counter, rptrPortGrpProtocolBanyan Counter, rptrPortGrpProtocolDECNet Counter, rptrPortGrpProtocolXNS Counter, rptrPortGrpProtocolIP Counter, rptrPortGrpProtocolCtron Counter, rptrPortGrpProtocolAppletalk Counter, rptrPortGrpProtocolOther Counter } rptrPortGrpProtocolId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortGrpProtocolEntry 1} rptrPortGrpProtocolOSI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received OSI packets." ::= {rptrPortGrpProtocolEntry 2} rptrPortGrpProtocolNovell OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received Novell packets." ::= {rptrPortGrpProtocolEntry 3} rptrPortGrpProtocolBanyan OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received Banyan packets." ::= {rptrPortGrpProtocolEntry 4} -- rptrPortGrpProtocolDECNet OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received DECNet packets." ite STATUS manda rptrPortGrpProtocolXNS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received XNS packets." ::= {rptrPortGrpProtocolEntry 6} rptrPortGrpProtocolIP OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received TCP/IP packets." ::= {rptrPortGrpProtocolEntry 7} rptrPortGrpProtocolCtron OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received CTRON Management packets." ::= {rptrPortGrpProtocolEntry 8} rptrPortGrpProtocolAppletalk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received Appletalk packets." ::= {rptrPortGrpProtocolEntry 9} rptrPortGrpProtocolOther OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received unknown protocol packets." ::= {rptrPortGrpProtocolEntry 10 } -- Repeater Port Group Frame Size Statistical Object Definitions -- This section defines a table of Port Group Frame Size Statistical objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory -- rptrPortGrpFrameSzTbl OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortGrpFrameSzEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPortGrpStats 3 } rptrPortGrpFrameSzEntry OBJECT-TYPE SYNTAX RptrPortGrpFrameSzEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortGrpFrameSzId } ::= { rptrPortGrpFrameSzTbl 1 } RptrPortGrpFrameSzEntry ::= SEQUENCE { rptrPortGrpFrameSzId INTEGER, rptrPortGrpFrameSzRunt Counter, rptrPortrpFrameSz64To127 Counter, rptrPortGrpFrameSz128To255 Counter, rptrPortGrpFrameSz256To511 Counter, rptrPortGrpFrameSz512To1023 Counter, rptrPortGrpFrameSz1024To1518 Counter, rptrPortGrpFrameSzGiant Counter } rptrPortGrpFrameSzId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortGrpFrameSzEntry 1} rptrPortGrpFrameSzRunt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received packets of size less than 64 bytes." ::= {rptrPortGrpFrameSzEntry 2} -- rptrPortGrpFrameSz64To127 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received packets of size between 64 and 127 bytes." ::= {rptrPortGrpFrameSzEntry 3} rptrPortGrpFrameSz128To255 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received packets of size between 128 and 255 bytes." ::= {rptrPortGrpFrameSzEntry 4} rptrPortGrpFrameSz256To511 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received packets of size between 256 and 511 bytes." ::= {rptrPortGrpFrameSzEntry 5} rptrPortGrpFrameSz512To1023 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received packets of size between 512 and 1023 bytes." ::= {rptrPortGrpFrameSzEntry 6} rptrPortGrpFrameSz1024To1518 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received packets of size between 1024 and 1518 bytes." ::= {rptrPortGrpFrameSzEntry 7} rptrPortGrpFrameSzGiant OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Return this port group's total received packets of size greater than 1518 bytes." ::= {rptrPortGrpFrameSzEntry 8} -- -- Repeater Port Group Alarm Object Definitions -- This section defines a table of Port Group Alarm objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortGrpAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortGrpAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPortGroup 3} rptrPortGrpAlarmEntry OBJECT-TYPE SYNTAX RptrPortGrpAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortGrpAlarmId } ::= { rptrPortGrpAlarmTable 1 } RptrPortGrpAlarmEntry ::= SEQUENCE { rptrPortGrpAlarmId INTEGER, rptrPortGrpAlarmTrafEnable INTEGER, rptrPortGrpAlarmTrafThreshold INTEGER, rptrPortGrpAlarmTrafGrpDisable INTEGER, rptrPortGrpAlarmCollEnable INTEGER, rptrPortGrpAlarmCollThreshold INTEGER, rptrPortGrpAlarmCollBdDisable INTEGER, rptrPortGrpAlarmErrEnable INTEGER, rptrPortGrpAlarmErrThreshold INTEGER, rptrPortGrpAlarmErrSource INTEGER, rptrPortGrpAlarmErrGrpDisable INTEGER } rptrPortGrpAlarmId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortGrpAlarmEntry 1} -- rptrPortGrpAlarmTrafEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms." ::= {rptrPortGrpAlarmEntry 2} rptrPortGrpAlarmTrafThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set packet threshold within the timebase that will cause an alarm." ::= {rptrPortGrpAlarmEntry 3} rptrPortGrpAlarmTrafGrpDisable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set will permit a port group to be disabled on a traffic alarm condition. Get will show whether the port group disabling is allowed or not." ::= {rptrPortGrpAlarmEntry 4} rptrPortGrpAlarmCollEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision aly 5} rptrPortGrpAlarmCollThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the number of collisions per good packet within the timebase that will cause an alarm." ::= {rptrPortGrpAlarmEntry 6} -- rptrPortGrpAlarmCollBdDisable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set will permit a board to be disabled on a collision alarm condition. Get will show whether the board disabling is allowed or not." ::= {rptrPortGrpAlarmEntry 7} rptrPortGrpAlarmErrEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms" ::= {rptrPortGrpAlarmEntry 8} rptrPortGrpAlarmErrThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the percentage of errors per good packet within the timebase that will cause an alarm." ::= {rptrPortGrpAlarmEntry 9} rptrPortGrpAlarmErrSource OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5" ::= {rptrPortGrpAlarmEntry 10} -- rptrPortGrpAlarmErrGrpDisable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set will permit a port group to be disabled on an error alarm condition. Get will show whether the port group disabling is allowed or not." ::= {rptrPortGrpAlarmEntry 11} -- Repeater Port Group Source Address Object Definitions -- This section defines a table of Port Group Soure Address objects -- under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortGrpSrcAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortGrpSrcAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPortGroup 4} rptrPortGrpSrcAddrEntry OBJECT-TYPE SYNTAX RptrPortGrpSrcAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortGrpSrcAddrId } ::= { rptrPortGrpSrcAddrTable 1 } RptrPortGrpSrcAddrEntry ::= SEQUENCE { rptrPortGrpSrcAddrId INTEGER, rptrPortGrpSrcAddrActiveUsers INTEGER } rptrPortGrpSrcAddrId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortGrpSrcAddrEntry 1} -- rptrPortGrpSrcAddrActiveUsers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of active users seen by this port group." ::= {rptrPortGrpSrcAddrEntry 2} -- Repeater Port Node -- The following branch in the repeater MIB tree pertains to individual -- repeater ports rptrPort OBJECT IDENTIFIER ::= {repeaterRev4 3 } -- Repeater Port Management Object Definitions -- This section defines a table of Port Management objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortMgmtTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortMgmtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPort 1 } rptrPortMgmtEntry OBJECT-TYPE SYNTAX Rpt INTEGER, es# INTEGER, esION "" INDEX { rptrPortMgmtPortId , rptrPortMgmtPortGrpId } ::= { rptrPortMgmtTable 1 } RptrPortMgmtEntry ::= SEQUENCE { rptrPortMgmtPortId INTEGER, rptrPortMgmtPortGrpId INTEGER, rptrPortMgmtName DisplayString, rptrPortMgmtAdminState INTEGER, rptrPortMgmtOperState INTEGER, prtrPortMgmtPortType OBJECT IDENTIFIER } -- rptrPortMgmtPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port for which the information in this table pertains." ::= {rptrPortMgmtEntry 1} rptrPortMgmtPortGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortMgmtEntry 2} rptrPortMgmtName OBJECT-TYPE SYNTAX DisplayString (SIZE(20)) ACCESS read-write STATUS mandatory DESCRIPTION "Sets/Gets an ASCII name assigned to this port." ::= {rptrPortMgmtEntry 3} rptrPortMgmtAdminState OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to Enable will cause port to be enabled. Setting this object to Disable will cause the port to be disabled. When read this object will return the state of the object per the last request." ::= {rptrPortMgmtEntry 4} rptrPortMgmtOperState OBJECT-TYPE SYNTAX INTEGER { notOperational(1), operational(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Get port operational status." ::= {rptrPortMgmtEntry 5} prtrPortMgmtPortType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely defines the repeater port type. A authoritative identification for a port type. By convention, this value is alocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides an easy and unambiguous means to determine the type of repeater port." ::= { rptrPortMgmtEntry 6 } -- -- Repeater Port Statistical Object Definitions rptrPortStats OBJECT IDENTIFIER ::= { rptrPort 2 } -- Repeater Port Packet Statistical Object Definitions -- This section defines a table of Port Packet Statistical objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortPktStatsTbl OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortPktStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPortStats 1 } rptrPortPktStatsEntry OBJECT-TYPE SYNTAX RptrPortPktStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortPktStatsPortId , rptrPortPktStatsPortGrpId } ::= { rptrPortPktStatsTbl 1 } RptrPortPktStatsEntry ::= SEQUENCE { rptrPortPktStatsPortId INTEGER, rptrPortPktStatsPortGrpId INTEGER, rptrPortPktStatsPackets Counter, rptrPortPktStatsBytes Counter, rptrPortPktStatsColls Counter, rptrPortPktStatsErrors Counter, rptrPortPktStatsAlign Counter, rptrPortPktStatsCRC Counter, rptrPortPktStatsOOW Counter } rptrPortPktStatsPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port for which the information in this table pertains." ::= {rptrPortPktStatsEntry 1} -- rptrPortPktStatsPortGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortPktStatsEntry 2} rptrPortPktStatsPackets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received packets." ::= {rptrPortPktStatsEntry 3} rptrPortPktStatsBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received bytes." ::= {rptrPortPktStatsEntry 4} rptrPortPktStatsColls OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total collisions." ::= {rptrPortPktStatsEntry 5} rptrPortPktStatsError} OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total errors." ::= {rptrPortPktStatsEntry 6} rptrPortPktStatsAlign OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total frame alignment errors." ::= {rptrPortPktStatsEntry 7} rptrPortPktStatsCRC OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total CRC errors." ::= {rptrPortPktStatsEntry 8} -- rptrPortPktStatsOOW OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total out-of-window collisions." ::= {rptrPortPktStatsEntry 9} -- Repeater Port Protocol Statistical Object Definitions -- This section defines a table of Port Protocol Statistical objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortProtocolTbl OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPortStats 2 } rptrPortProtocolEntry OBJECT-TYPE SYNTAX RptrPortProtocolEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortProtocolPortId , rptrPortProtocolPortGrpId } ::= { rptrPortProtocolTbl 1 } RptrPortProtocolEntry ::= SEQUENCE { rptrPortProtocolPortId INTEGER, rptrPortProtocolPortGrpId INTEGER, rptrPortProtocolOSI Counter, rptrPortProtocolNovell Counter, rptrPortProtocolBanyan Counter, rptrPortProtocolDECNet Counter, rptrPortProtocolXNS Counter, rptrPortProtocolIP Counter, rptrPortProtocolCtron Counter, rptrPortProtocolAppletalk Counter, rptrPortProtocolOther Counter } -- rptrPortProtocolPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port for which the information in this table pertains." ::= {rptrPortProtocolEntry 1} rptrPortProtocolPortGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortProtocolEntry 2} rptrPortProtocolOSI OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received OSI protocol packets." ::= {rptrPortProtocolEntry 3} rptrPortProtocolNovell OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received Novell protocol packets." ::= {rptrPortProtocolEntry 4} rptrPortProtocolBanyan OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received Banyan protocol packets." ::= {rptrPortProtocolEntry 5} rptrPortProtocolDECNet OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received DECNet protocol packets." ::= {rptrPortProtocolEntry 6} rptrPortProtocolXNS OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received XNS protocol packets." ::= {rptrPortProtocolEntry 7} -- rptrPortProtocolIP OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received TCP/IP protocol packets." ::= {rptrPortProtocolEntry 8} rptrPortProtocolCtron OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received CTRON Management protocol packets." ::= {rptrPortProtocolEntry 9} rptrPortProtocolAppletalk OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received Appletalk protocol packets." ::= {rptrPortProtocolEntry 10} rptrPortProtocolOther OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received unknown protocol packets." ::= {rptrPortProtocolEntry 11} -- Repeater Port Frame Size Statistical Object Definitions -- This section defines a table of Port Frame Size Statistical objects -- under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortFrameSzTbl OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortFrameSzEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Description goes here." ::= { rptrPortStats 3 } rptrPortFrameSzEntry OBJECT-TYPE SYNTAX RptrPortFrameSzEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Description goes here." INDEX { rptrPortFrameSzPortId , rptrPortFrameSzPortGrpId } ::= { rptrPortFrameSzTbl 1 } -- RptrPortFrameSzEntry ::= SEQUENCE { rptrPortFrameSzPortId INTEGER, rptrPortFrameSzPortGrpId INTEGER, rptrPortFrameSzRunt Counter, rptrPortFrameSz64To127 Counter, rptrPortFrameSz128To255 Counter, rptrPortFrameSz256To511 Counter, rptrPortFrameSz512To1023 Counter, rptrPortFrameSz1024To1518 Counter, rptrPortFrameSzGiant Counter } rptrPortFrameSzPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port for which the information in this table pertains." ::= {rptrPortFrameSzEntry 1} rptrPortFrameSzPortGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortFrameSzEntry 2} rptrPortFrameSzRunt OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received packets of size less than 64 bytes." ::= {rptrPortFrameSzEntry 3} rptrPortFrameSz64To127 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received packets of size between 64 and 127 bytes." ::= {rptrPortFrameSzEntry 4} -- rptrPortFrameSz128To255 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received packets of size between 128 and 255 bytes." ::= {rptrPortFrameSzEntry 5} rptrPortFrameSz256To511 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received packets of size between 256 and 511 bytes." ::= {rptrPortFrameSzEntry 6} rptrPortFrameSz512To1023 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received packets of size between 512 and 1023 bytes." ::= {rptrPortFrameSzEntry 7} rptrPortFrameSz1024To1518 OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received packets of size between 1024 and 1518 bytes." ::= {rptrPortFrameSzEntry 8} rptrPortFrameSzGiant OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Get this port's total received packets of size greater than 1518 bytes." ::= {rptrPortFrameSzEntry 9} -- -- Repeater Port Alarm Object Definitions -- This section defines a table of Port Alarm objects under the Repeater node. -- The implementation of this group is optional, but within the group all -- of the elements are mandatory rptrPortAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPort 3 } rptrPortAlarmEntry OBJECT-TYPE SYNTAX RptrPortAlarmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortAlarmPortId , rptrPortAlarmPortGrpId } ::= { rptrPortAlarmTable 1 } RptrPortAlarmEntry ::= SEQUENCE  rptrPortAlarmPortId INTEGER, rptrPortAlarmPortGrpId INTEGER, rptrPortAlarmTrafEnable INTEGER, rptrPortAlarmTrafThreshold INTEGER, rptrPortAlarmTrafPortDisable INTEGER, rptrPortAlarmCollEnable INTEGER, rptrPortAlarmCollThreshold INTEGER, rptrPortAlarmCollPortDisable INTEGER, rptrPortAlarmErrEnable INTEGER, rptrPortAlarmErrThreshold INTEGER, rptrPortAlarmErrSource INTEGER, rptrPortAlarmErrPortDisable INTEGER } rptrPortAlarmPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port for which the information in this table pertains." ::= {rptrPortAlarmEntry 1} -- rptrPortAlarmPortGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortAlarmEntry 2} rptrPortAlarmTrafEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get returns whether traffic alarms are enabled/disabled. Set allows for enabling/disabling of traffic alarms." ::= {rptrPortAlarmEntry 3} rptrPortAlarmTrafThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set packet threshold within the timebase that will cause an alarm." ::= {rptrPortAlarmEntry 4} rptrPortAlarmTrafPortDisable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set will permit a port to be disabled on a traffic alarm condition. Get will show whether the port disabling is allowed or not." ::= {rptrPortAlarmEntry 5} rptrPortAlarmCollEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get returns whether collision alarms are enabled/disabled. Set allows for enabling/disabling of collision alarms." ::= {rptrPortAlarmEntry 6} -- rptrPortAlarmCollThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the number of collisions per good packet within the timebase that will cause an alarm." ::= {rptrPortAlarmEntry 7} rptrPortAlarmCollPortDisable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set will permit a port to be disabled on a collision alarm condition. Get will show whether the port disabling is allowed or not." ::= {rptrPortAlarmEntry 8} rptrPortAlarmErrEnable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Get returns whether error alarms are enabled/disabled. Set allows for enabling/disabling of error alarms" ::= {rptrPortAlarmEntry 9} rptrPortAlarmErrThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set the percentage of errors per good packet within the timebase that will cause an alarm." ::= {rptrPortAlarmEntry 10} rptrPortAlarmErrSource OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set a bit encoded map of which errors to include in the error sum, as follows: CRC_errors - Bit 0 - Least Significant Bit runts - Bit 1 OOW_colls - Bit 2 align_errs - Bit 3 undefined - Bit 4 Giants - Bit 5" ::= {rptrPortAlarmEntry 11} -- rptrPortAlarmErrPortDisable OBJECT-TYPE SYNTAX INTEGER { disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set will permit a port to be disabled on an error alarm condition. Get will show whether the port disabling is allowed or not." ::= {rptrPortAlarmEntry 12} -- Repeater Port Redundancy Object Definitions -- This section defines a table of Port Redundancy objects under the Repeater node. -- This group of objects may be implemented only if the entire set of -- redundancy object groups have been implemented. rptrPortRedundTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortRedundEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPort 4 } rptrPortRedundEntry OBJECT-TYPE SYNTAX RptrPortRedundEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortRedundPortId , rptrPortRedundPortGrpId } ::= { rptrPortRedundTable 1 } RptrPortRedundEntry ::= SEQUENCE { rptrPortRedundPortId INTEGER, rptrPortRedundPortGrpId INTEGER, rptrPortRedundCrctNum INTEGER, rptrPortRedundType INTEGER, rptrPortRedundStatus INTEGER } rptrPortRedundPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port for which the information in this table pertains." ::= {rptrPortRedundEntry 1} -- rptrPortRedundPortGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortRedundEntry 2} rptrPortRedundCrctNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set redundant circuit number of redundant circuit that port is or is to be associated with." ::= {rptrPortRedundEntry 3} rptrPortRedundType OBJECT-TYPE SYNTAX INTEGER { notUsed(1), primary(2), backup(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set redundant port type." ::= { rptrPortRedundEntry 4 } rptrPortRedundStatus OBJECT-TYPE SYNTAX INTEGER { notUsed(1), active(2), inactive(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Get/Set redundant port status." ::= {rptrPortRedundEntry 5} -- Repeater Port Source Address Object Definitions -- This section defines a table of Port Source Address -- objects under the Repeater node. -- This group of objects may be implemented only if the entire set of -- this group has been implemented. rptrPortSrcAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortSrcAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPort 5 } -- rptrPortSrcAddrEntry OBJECT-TYPE SYNTAX RptrPortSrcAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortSrcAddrPortId , rptrPortSrcAddrPortGrpId } ::= { rptrPortSrcAddrTable 1 } RptrPortSrcAddrEntry ::= SEQUENCE { rptrPortSrcAddrPortId INTEGER, rptrPortSrcAddrPortGrpId INTEGER, rptrPortSrcAddrTopoState INTEGER, rptrPortSrcAddrForceTrunk INTEGER, rptrPortSrcAddrActiveUsers INTEGER } rptrPortSrcAddrPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port for which the information in this table pertains." ::= {rptrPortSrcAddrEntry 1} rptrPortSrcAddrPortGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortSrcAddrEntry 2} rptrPortSrcAddrTopoState OBJECT-TYPE SYNTAX INTEGER { station(1), trunk(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Returns the topological state of the port." ::= {rptrPortSrcAddrEntry 3} -- rptrPortSrcAddrForceTrunk OBJECT-TYPE SYNTAX INTEGER { noForce(1), force(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this object is set to Force it causes the port to be placed into a Trunk topological state whether the network traffic would warrant such a state or not. When this object is set to NoForce it allows the port to assume the topological state it would naturally assume based on the network activity acrossed it. When read this object reports the current setting." ::= {rptrPortSrcAddrEntry 4} rptrPortSrcAddrActiveUsers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns the total number of active users seen by this port." ::= {rptrPortSrcAddrEntry 5} -- Repeater Port Source Address List Object Definitions -- This section defines a table of Port Source Address List -- objects under the Repeater node. -- This group may only be implemented if the entire set of source addressing -- object groups have been implemented. rptrPortSrcAddrListTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortSrcAddrListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPort 6 } rptrPortSrcAddrListEntry OBJECT-TYPE SYNTAX RptrPortSrcAddrListEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortSrcAddrListId, rptrPortSrcAddrListPortId , rptrPortSrcAddrListPortGrpId } ::= { rptrPortSrcAddrListTable 1 } -- RptrPortSrcAddrListEntry ::= SEQUENCE { rptrPortSrcAddrListId INTEGER, rptrPortSrcAddrListPortId INTEGER, rptrPortSrcAddrListPortGrpId INTEGER, rptrPortSrcAddrAddressList OCTET STRING } rptrPortSrcAddrListId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index associated with the number of address to be returned." ::= {rptrPortSrcAddrListEntry 1} rptrPortSrcAddrListPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port for which the infïsmation in this table pertains." ::= {rptrPortSrcAddrListEntry 2} rptrPortSrcAddrListPortGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Råuurns an index to a port group for which the information in this table pertains." ::= {rptrPortSrcAddrListEntry 3} rptrPortSrcAddrAddressList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-only STATUS mandatory DESCRIPTION "Returns a source address seen on this port." ::= {rptrPortSrcAddrListEntry 4} -- -- Repeater Port Hardware List Object Definitions -- This section defines a table of Hardware objects under the port node. -- This group may only be implemented if the entire set of source addressing -- object groups have been implemented. rptrPortHardwareTable OBJECT-TYPE SYNTAX SEQUENCE OF RptrPortHardwareEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" ::= { rptrPort 7 } rptrPortHardwareEntry OBJECT-TYPE SYNTAX RptrPortHardwareEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { rptrPortHardwarePortId , rptrPortHardwarePortGrpId } ::= { rptrPortHardwareTable 1 } RptrPortHardwareEntry ::= SEQUENCE { rptrPortHardwarePortId INTEGER, rptrPortHardwarePortGrpId INTEGER, rptrPortHardwareSegStatus INTEGER, rptrPortHardwareLinkStatus INTEGER } rptrPortHardwarePortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port for which the information in this table pertains." ::= {rptrPortHardwareEntry 1} rptrPortHardwarePortGrpId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Returns an index to a port group for which the information in this table pertains." ::= {rptrPortHardwareEntry 2} -- rptrPortHardwareSegStatus OBJECT-TYPE SYNTAX INTEGER { notSegmented(1), segmented(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Returns port segmentation status." ::= {rptrPortHardwareEntry 3} rptrPortHardwareLinkStatus OBJECT-TYPE SYNTAX INTEGER { notLinked(1), linked(2), notApplicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Returns port link status." ::= {rptrPortHardwareEntry 4} -- -- TrapTypes -- This section will describe the trap types that the -- repeater section of the EMMe can generate. These are not -- objects, but Object identifers used to indicate the specfic -- trap. They are taken from the object space and are thus -- documented here. -- The SNMP protocol provides a mechanism for -- asynchronusly notifying management stations of significant -- changes in the network. This mechanism is the SNMP trap -- message. This document will describe the general format for -- all trap messages that Cabletron products will generate as -- well as the specific traps that the will be generated by the -- EMMe. -- Trap Formats -- The SNMP trap messages are composed of two user -- definable areas: the specific trap type and the VarBindings -- (eg. the interesting information). The specific trap type is -- an INTEGER that is used to determine the specific trap that -- has occurred. The "interesting information" contains a group -- of objects identifiers (OID) and their values that provide -- information about the trap. -- Trap Description -- PortSegmenting -- Specfic Trap Type Code - 0x101 -- When a port goes from operational to segmented, a trap -- will be generated. For these purposes, the port state will -- be sampled every XXX seconds, thus it will be statistically -- possible to miss oscillating circuits. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- Trap Description -- PortUnsegementing -- Specfic Trap Type Code - 0x102 -- When it is detected that a previously segmented port -- has gone operational, a trap will be generated. This is -- also sampled, thus a trap may not be generated for each -- transition. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- Trap Description -- PortLinkUp -- Specfic Trap Type Code - 0x103 -- This trap will be generated when it is determined that -- MAU has been attached to the MMAC. This is only appropriate -- for MIMs that support the concept of a link state. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- Trap Description -- PortLinkDown -- Specfic Trap Type Code - 0x104 -- This trap will be generated when a previously attached -- MAU is removed or powered down. Again, this is only -- appropriate for MIM's that support link state. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- Trap Description -- NewSourceAddress -- Specfic Trap Type Code - 0x105 -- This trap will be generated when the MMAC detects the -- existence of a new source address on one of it's ports. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- PortSourceAddr {rptrPortSrcAddrListEntry 4} -- Trap Description -- SourceAddressTimeout -- Specfic Trap Type Code - 0x106 -- This trap will indicate that the MMAC has not detected -- a packet generated by this source address within a certain -- timeout. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- PortSourceAddr {rptrPortSrcAddrListEntry 4} -- Trap Description -- BoardRemoval -- Specfic Trap Type Code - 0x107 -- This trap will be generated when the MMAC detects that -- MIM has been removed. -- The interesting information will include: -- BoardIndex {chSlotEntry 1} in the chassisMib 1.3.6.1.4.1.52.4.1.1.2.5.1.1 -- Trap Description -- BoardInsertion -- Specfic Trap Type Code - 0x108 -- This trap will be generated when the MMAC determines -- that a new board has been inserted. -- The interesting information will include: -- BoardIndex {chSlotEntry 1} in the chassisMib 1.3.6.1.4.1.52.4.1.1.2.5.1.1 -- BoardType {chSlotEntry 4} in the chassisMib 1.3.6.1.4.1.52.4.1.1.2.5.1.4 -- Trap Description -- ActivePortInRedundantCircuitFailed -- Specfic Trap Type Code - 0x109 -- This trap will be generated when the active port in a -- redundant circuit has failed polling. This will indicate the -- activation of redundancy. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- PortRedundCrt {rptrPortRedundEntry 3} -- Trap Description -- RedundantPortActivated -- Specfic Trap Type Code - 0x10a -- This trap indicates that a new port has been activated -- in a redundant circuit. This does NOT indicate that this -- port is usable, but is being tested. If the port fails the -- above (3.9) trap will be generated. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- PortRedundCrt {rptrPortRedundEntry 3} -- Trap Description -- RedundantPortTestFailed -- Specfic Trap Type Code - 0x10b -- This trap will be generated when the MMAC executes it's -- periodic redundancy diagnostics and finds on of the ports in -- a redundant circuit has failed. This message will not -- indicate that redundancy has been activated, just that the -- port has failed and should be fixed before it is needed. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- PortRedundCrt {rptrPortRedundEntry 3} -- Trap Description -- BoardTrafficThresholdExceeded -- Specfic Trap Type Code - 0x10f -- This trap will be generated when the traffic (good -- packets per time interval) has been exceed for a particular -- MIM. -- The interesting information will include: -- BoardTrafficThreshold {rptrPortGrpAlarmEntry 3} -- RptrTimebase {rptrAlarms 8} -- BoardIndex {rptrPortGrpMgmtEntry 1} -- Trap Description -- BoardErrorThresholdExceeded -- Specfic Trap Type Code - 0x110 -- This trap will be generated when packets of the -- selected error type exceeds a threshold percentage of the -- good packets for a particular interval for a particular MIM. -- This will most likely indicate a bad MIM. -- The interesting information will include: -- BoardErrorThreshold {rptrPortGrpAlarmEntry 9} -- BoardErrorSource {rptrPortGrpAlarmEntry 10} -- RptrTimebase {rptrAlarms 8} -- BoardIndex {rptrPortGrpMgmtEntry 1} -- Trap Description -- BoardCollisionThresholdExceeded -- Specfic Trap Type Code - 0x111 -- This trap will be generated when collisions exceed a -- threshold percentage of the good packets for a particular -- interval for a particular MIM. -- The interesting information will include: -- BoardCollsThreshold {rptrPortGrpAlarmEntry 6} -- RptrTimebase {rptrAlarms 8} -- BoardIndex {rptrPortGrpMgmtEntry 1} -- Trap Description -- PortTrafficThresholdExceeded -- Specfic Trap Type Code - 0x112 -- This trap will be generated when the traffic (good -- packets per time interval) has been exceed for a particular -- port. -- The interesting information will include: -- PortTrafficThreshold {rptrPortAlarmEntry 4} -- RptrTimebase {rptrAlarms 8} -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- Trap Description -- PortErrorThresholdExceeded -- Specfic Trap Type Code - 0x113 -- This trap will be generated when packets of the -- selected error type exceeds a threshold percentage of the -- good packets for a particular interval for a particular -- port. -- The interesting information will include: -- PortErrorThreshold {rptrPortAlarmEntry 10} -- PortErrorSource {rptrPortAlarmEntry 11} -- RptrTimebase {rptrAlarms 8} -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- Trap Description -- PortCollisionThresholdExceeded -- Specfic Trap Type Code - 0x114 -- This trap will be generated when collisions exceed a -- threshold percentage of the good packets for a particular -- interval for a particular port. -- The interesting information will include: -- PortCollsThreshold {rptrPortAlarmEntry 7} -- RptrTimebase {rptrAlarms 8} -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- Trap Description -- PortTypeChanged -- Specfic Trap Type Code - 0x115 -- This trap indicates that a port has changed from a -- station port to a link port or vice versa. -- The interesting information is: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- PortTopologyType {rptrPortSrcAddrEntry 3 } -- Trap Description -- PortSecurityViolation -- Specfic Trap Type Code - 0x117 -- This trap is generated when a source address other than those -- locked to a port is seen. -- The interesting information is: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- PortSourceAddr {rptrPortSrcAddrListEntry 4} -- Trap Description -- PortViolationReset -- Specfic Trap Type Code - 0x118 -- This trap is generated when management intervention has -- reset a port after a violation has occured. -- The interesting information is: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- Trap Description -- EnvTempWarm -- Specfic Trap Type Code - 0x119 -- This trap is generated when the device detects that the temperature -- within a MIM has reached a WARM condition. -- The interesting information is: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- Trap Description -- EnvTempHot -- Specfic Trap Type Code - 0x11A -- This trap is generated when the device detects that the temperature -- within a MIM has reached a HOT condition. -- The interesting information is: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- Trap Description -- EnvTempNormal -- Specfic Trap Type Code - 0x11C -- This trap is generated when the device detects that the temperature -- within a MIM has returned to a NORMAL state. -- The interesting information is: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- Trap Description -- EnvVoltageLow -- Specfic Trap Type Code - 0x11B -- This trap is generated when a power supply`s voltage is LOW. -- The interesting information is: -- PowerSupply {PowerEntry 1} in the commonMib 1.3.6.1.4.1.52.1.6.1.4.1.1 -- Trap Description -- EnvVoltageNormal -- Specfic Trap Type Code - 0x11D -- This trap is generated when a power supply's voltage -- has returned to a NORMAL state. -- The interesting information is: -- PowerSupply {PowerEntry 1} in the commonMib 1.3.6.1.4.1.52.1.6.1.4.1.1 -- Trap Description -- FanFail -- Specfic Trap Type Code - 0x11E -- This trap is generated when the device detects that the system fans -- have failed. -- The interesting information is: -- None -- Trap Description -- FanNormal -- Specfic Trap Type Code - 0x11F -- This trap is generated when the device detects that the system fans -- have returned to normal. -- The interesting information is: -- None -- Trap Description -- SystemVolatgeLow -- Specfic Trap Type Code - 0x125 -- This trap is generated when the device detects that the power -- to the EMMe is low. -- The interesting information is: -- None -- Trap Description -- SystemVolatgeNormal -- Specfic Trap Type Code - 0x126 -- This trap is generated when the device detects that the power -- to the EMMe has returned to normal. -- The interesting information is: -- None -- Trap Description -- EpimRemoval -- Specfic Trap Type Code - 0x127 -- This trap will be generated when it is detected that an EPIM -- has been removed. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- Trap Description -- Epiminsertion -- Specfic Trap Type Code - 0x128 -- This trap will be generated when it is detected that an EPIM -- has been inserted. -- The interesting information will include: -- BoardIndex {rptrPortGrpMgmtEntry 1} -- PortIndex {rptrPortMgmtEntry 1} -- PortType {} oid to be determined -- Trap Description -- RptrTrafficThresholdExceeded -- Specfic Trap Type Code - 0x129 -- This trap will be generated when the traffic (good -- packets per time interval) has been exceed for a network. -- The interesting information will include: -- RptrTrafficThreshold {rptrAlarms 2} -- RptrTimebase {rptrAlarms 8} -- RptrInterfaceNum {rptrMgmt 6} -- Trap Description -- RptrErrorThresholdExceeded -- Specfic Trap Type Code - 0x130 -- This trap will be generated when packets of the -- selected error type exceeds a threshold percentage of the -- good packets for a particular interval for an entire network. -- The interesting information will include: -- RptrErrorThreshold {rptrAlarms 6} -- RptrErrorSource {rptrAlarms 7} -- RptrTimebase {rptrAlarms 8} -- RptrInterfaceNum {rptrMgmt 6} -- Trap Description -- RptrCollsionThresholdExceeded -- Specfic Trap Type Code - 0x131 -- This trap will be generated when collsions exceed a -- threshold percentage of the good packets for a particular -- interval for an entire network. -- The interesting information will include: -- RptrCollsThreshold {rptrAlarms 4} -- RptrTimebase {rptrAlarms 8} -- RptrInterfaceNum {rptrMgmt 6} -- Trap Description -- RptrLockSTATUSChanged -- Specfic Trap Type Code - 0x132 -- This trap is generated when the status of the address lock -- changes for a certain network. -- The interesting information is: -- RptrSrcAddrLocked {rptrSrcAddrMgmt 2} -- RptrInterfaceNum {rptrMgmt 6} END