-- MIB File Generated on 14-Sep-1995 at 17:23:55 ULPB-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, experimental, IpAddress, TimeTicks, Gauge, Counter FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; usr OBJECT IDENTIFIER ::= { enterprises 429 } nas OBJECT IDENTIFIER ::= { usr 1 } ulpb OBJECT IDENTIFIER ::= { nas 9 } ulpbAdmnTable OBJECT-TYPE SYNTAX SEQUENCE OF UlpbAdmnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the objects that can be changed to manage a LAPB interface. Changing one of these parameters may take effect in the operating LAPB immediately or may wait until the interface is restarted depending on the details of the implementation." ::= { ulpb 1 } ulpbAdmnEntry OBJECT-TYPE SYNTAX UlpbAdmnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Configure parameter values for a specific LAPB." INDEX { ulpbAdmnIndex } ::= { ulpbAdmnTable 1 } UlpbAdmnEntry ::= SEQUENCE { ulpbAdmnIndex INTEGER, ulpbAdmnN2ReXmitVal INTEGER, ulpbAdmnT1AckTime INTEGER, ulpbAdmnTpfVal INTEGER, ulpbAdmnTrejVal INTEGER, ulpbAdmnTbusyVal INTEGER, ulpbAdmnLinkIdleTime INTEGER, ulpbAdmnT2AckDelayTime INTEGER, ulpbAdmnRecKWindowSz INTEGER, ulpbAdmnXmitKWindowSz INTEGER, ulpbAdmnLocProbe INTEGER, ulpbAdmnMaxRecFrmSz INTEGER, ulpbAdmnIgnUaError INTEGER, ulpbAdmnFrmrFrmrError INTEGER, ulpbAdmnFrmrInvrspError INTEGER, ulpbAdmnSframePbit INTEGER, ulpbAdmnDmOnAdm INTEGER } ulpbAdmnIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each X.25 subnetwork entity running LAPB in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity running LAPB entry in the entity table of the chassis MIB." ::= { ulpbAdmnEntry 1 } ulpbAdmnN2ReXmitVal OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of times a PDU is sent after the Ack, P-bit or Reject timer expires. It also limits RR w/P-bit sends with remote busy true and the Busy timer expiring. Default=10." ::= { ulpbAdmnEntry 2 } ulpbAdmnT1AckTime OBJECT-TYPE SYNTAX INTEGER (1..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The time interval during which the LAPB expects to receive a response to an outstanding IPDU or unexpected response to a sent unnumbered PDU. Value is in 0.1 second units. Default=10." ::= { ulpbAdmnEntry 3 } ulpbAdmnTpfVal OBJECT-TYPE SYNTAX INTEGER (1..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The time interval during which the LAPB expects to receive a PDU with the F-bit set to 1 in response to a command with the P-bit set to 1. Value is in 0.1 second units. Default=7." ::= { ulpbAdmnEntry 4 } ulpbAdmnTrejVal OBJECT-TYPE SYNTAX INTEGER (1..10000) ACCESS read-write STATUS mandatory DESCRIPTION "The time interval during which the LAPB expects to receive a reply to a sent REJ TPDU. Value is in 0.1 second units. Default=25." ::= { ulpbAdmnEntry 5 } ulpbAdmnTbusyVal OBJECT-TYPE SYNTAX INTEGER (1..30000) ACCESS read-write STATUS mandatory DESCRIPTION "The time interval during which the LAPB waits for an indication of the clearance of a busy condition at the other LAPB. Value is in 0.1 second units. Default=100." ::= { ulpbAdmnEntry 6 } ulpbAdmnLinkIdleTime OBJECT-TYPE SYNTAX INTEGER (0..32000) ACCESS read-write STATUS mandatory DESCRIPTION "The time interval during which the LAPB expexts to receive a PDU from the other LAPB. At expiration, the P/F cycle, which may result in disconnection is initiated. Value is in 0.1 second units. A value of 0 disables the timer. Default=250." ::= { ulpbAdmnEntry 7 } ulpbAdmnT2AckDelayTime OBJECT-TYPE SYNTAX INTEGER (0..3000) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum time delay before sending a delayed RR. This must be considerably less than the Ack time value. Value is in 0.1 second units. Default=4." ::= { ulpbAdmnEntry 8 } ulpbAdmnRecKWindowSz OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of unacknowledged IPDUs that can be received before the acknowledgement RR must be sent. Default=3." ::= { ulpbAdmnEntry 9 } ulpbAdmnXmitKWindowSz OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of unacknowledged PDUs that may be sent before a response is required. Normal Mode = 1-7. Extended Mode = 1-127. Default=7." ::= { ulpbAdmnEntry 10 } ulpbAdmnLocProbe OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-write STATUS mandatory DESCRIPTION "The position before the window is closed at which an I PDU is sent with the P-bit set to solicit an acknowledgment from the receiver. Default=0." ::= { ulpbAdmnEntry 11 } ulpbAdmnMaxRecFrmSz OBJECT-TYPE SYNTAX INTEGER (133..519) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum allowable received I frame size. It consists of X25 data + x25 protocol + LAPB protocol. Default=300." ::= { ulpbAdmnEntry 12 } ulpbAdmnIgnUaError OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When the connection is in ERROR state, this parameter defines whether or not to ignore any UA frames received. Default=disable(1)." ::= { ulpbAdmnEntry 13 } ulpbAdmnFrmrFrmrError OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When the connection is in ERROR state, this parameter defines whether or not to re-transmit a frame reject if one is received. Default=disable(1)." ::= { ulpbAdmnEntry 14 } ulpbAdmnFrmrInvrspError OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When the connection is in ERROR state, this parameter defines whether or not to transmit a frame reject if an invalid frame response is received. Default=disable(1)." ::= { ulpbAdmnEntry 15 } ulpbAdmnSframePbit OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter defines whether or not to send a frame reject if an S-Frame is received without the P-bit set. Default=disable(1)." ::= { ulpbAdmnEntry 16 } ulpbAdmnDmOnAdm OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter defines whether or not to send a DM on entry to ADM state. Default=enable(2)." ::= { ulpbAdmnEntry 17 } ulpbOperTable OBJECT-TYPE SYNTAX SEQUENCE OF UlpbOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains configuration information about interface parameters currently set in the interface. These objects are read-only." ::= { ulpb 2 } ulpbOperEntry OBJECT-TYPE SYNTAX UlpbOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entries of ulpbOperTable." INDEX { ulpbOperIndex } ::= { ulpbOperTable 1 } UlpbOperEntry ::= SEQUENCE { ulpbOperIndex INTEGER, ulpbOperN2ReXmitVal INTEGER, ulpbOperT1AckTime INTEGER, ulpbOperTpfVal INTEGER, ulpbOperTrejVal INTEGER, ulpbOperTbusyVal INTEGER, ulpbOperLinkIdleTime INTEGER, ulpbOperT2AckDelayTime INTEGER, ulpbOperRecKWindowSz INTEGER, ulpbOperXmitKWindowSz INTEGER, ulpbOperLocProbe INTEGER, ulpbOperMaxRecFrmSz INTEGER, ulpbOperIgnUaError INTEGER, ulpbOperFrmrFrmrError INTEGER, ulpbOperFrmrInvrspError INTEGER, ulpbOperSframePbit INTEGER, ulpbOperDmOnAdm INTEGER } ulpbOperIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 1 } ulpbOperN2ReXmitVal OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 2 } ulpbOperT1AckTime OBJECT-TYPE SYNTAX INTEGER (1..3000) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 3 } ulpbOperTpfVal OBJECT-TYPE SYNTAX INTEGER (1..3000) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 4 } ulpbOperTrejVal OBJECT-TYPE SYNTAX INTEGER (1..10000) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 5 } ulpbOperTbusyVal OBJECT-TYPE SYNTAX INTEGER (1..30000) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 6 } ulpbOperLinkIdleTime OBJECT-TYPE SYNTAX INTEGER (0..32000) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 7 } ulpbOperT2AckDelayTime OBJECT-TYPE SYNTAX INTEGER (0..3000) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 8 } ulpbOperRecKWindowSz OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 9 } ulpbOperXmitKWindowSz OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 10 } ulpbOperLocProbe OBJECT-TYPE SYNTAX INTEGER (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 11 } ulpbOperMaxRecFrmSz OBJECT-TYPE SYNTAX INTEGER (133..519) ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 12 } ulpbOperIgnUaError OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 13 } ulpbOperFrmrFrmrError OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 14 } ulpbOperFrmrInvrspError OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 15 } ulpbOperSframePbit OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 16 } ulpbOperDmOnAdm OBJECT-TYPE SYNTAX INTEGER{ disable(1), enable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { ulpbOperEntry 17 } ulpbStatTable OBJECT-TYPE SYNTAX SEQUENCE OF UlpbStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Statistics information about this LAPB interface." ::= { ulpb 3 } ulpbStatEntry OBJECT-TYPE SYNTAX UlpbStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Entries of ulpbStatTrable." INDEX { ulpbStatIndex } ::= { ulpbStatTable 1 } UlpbStatEntry ::= SEQUENCE { ulpbStatIndex INTEGER, ulpbStatRRCmdsRcvd INTEGER, ulpbStatRRCmdsTrnsmt INTEGER, ulpbStatRRRspsRcvd INTEGER, ulpbStatRRRspsTrnsmt INTEGER, ulpbStatRNRCmdsRcvd INTEGER, ulpbStatRNRCmdsTrnsmt INTEGER, ulpbStatRNRRspsRcvd INTEGER, ulpbStatRNRRspsTrnsmt INTEGER, ulpbStatREJCmdsRcvd INTEGER, ulpbStatREJCmdsTrnsmt INTEGER, ulpbStatREJRspsRcvd INTEGER, ulpbStatREJRspsTrnsmt INTEGER, ulpbStatSABMCmdsRcvd INTEGER, ulpbStatSABMCmdsTrnsmt INTEGER, ulpbStatDISCCmdsRcvd INTEGER, ulpbStatDISCCmdsTrnsmt INTEGER, ulpbStatDMRspsRcvd INTEGER, ulpbStatDMRspsTrnsmt INTEGER, ulpbStatUARspsRcvd INTEGER, ulpbStatUARspsTrnsmt INTEGER, ulpbStatFRMRRspsRcvd INTEGER, ulpbStatFRMRRspsTrnsmt INTEGER, ulpbStatIFrameCmdsRcvd INTEGER, ulpbStatIFrameCmdsTrnsmt INTEGER } ulpbStatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each X.25 subnetwork entity running LAPB in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity running LAPB entry in the entity table of the chassis MIB." ::= { ulpbStatEntry 1 } ulpbStatRRCmdsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of RR commands received." ::= { ulpbStatEntry 2 } ulpbStatRRCmdsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of RR commands transmitted." ::= { ulpbStatEntry 3 } ulpbStatRRRspsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of RR response received." ::= { ulpbStatEntry 4 } ulpbStatRRRspsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number or RR response transmitted." ::= { ulpbStatEntry 5 } ulpbStatRNRCmdsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of RNR commands received." ::= { ulpbStatEntry 6 } ulpbStatRNRCmdsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of RNR commands transmitted." ::= { ulpbStatEntry 7 } ulpbStatRNRRspsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of RNR response received." ::= { ulpbStatEntry 8 } ulpbStatRNRRspsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of RNR response transmitted." ::= { ulpbStatEntry 9 } ulpbStatREJCmdsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of REJ commands received." ::= { ulpbStatEntry 10 } ulpbStatREJCmdsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of REJ commands transmitted." ::= { ulpbStatEntry 11 } ulpbStatREJRspsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of REJ responses received." ::= { ulpbStatEntry 12 } ulpbStatREJRspsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of REJ responses transmitted." ::= { ulpbStatEntry 13 } ulpbStatSABMCmdsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of SABM commands received." ::= { ulpbStatEntry 14 } ulpbStatSABMCmdsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of SABM commands transmitted." ::= { ulpbStatEntry 15 } ulpbStatDISCCmdsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of DISC commands received." ::= { ulpbStatEntry 16 } ulpbStatDISCCmdsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of DISC commands transmitted." ::= { ulpbStatEntry 17 } ulpbStatDMRspsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of DM response received." ::= { ulpbStatEntry 18 } ulpbStatDMRspsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of DM response transmitted." ::= { ulpbStatEntry 19 } ulpbStatUARspsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of UA response received." ::= { ulpbStatEntry 20 } ulpbStatUARspsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of UA response transmitted." ::= { ulpbStatEntry 21 } ulpbStatFRMRRspsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of FRMR response received." ::= { ulpbStatEntry 22 } ulpbStatFRMRRspsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of FRMR response transmitted." ::= { ulpbStatEntry 23 } ulpbStatIFrameCmdsRcvd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-frame command received." ::= { ulpbStatEntry 24 } ulpbStatIFrameCmdsTrnsmt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Number of I-frame commands transmitted." ::= { ulpbStatEntry 25 } END