XYPLEX-LAT-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, Counter, Gauge, TimeTicks FROM RFC1155-SMI DisplayString FROM RFC1158-MIB OBJECT-TYPE FROM RFC1212-CONCISE-MIB; xyplex OBJECT IDENTIFIER ::= { enterprises 33 } lat OBJECT IDENTIFIER ::= { xyplex 3 } -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [9] -- This is a MIB module for all Xyplex systems that -- implement LAT -- the LAT group -- Implementation of this group is mandatory for all Xyplex -- systems that implement LAT latAnnounceServices OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for automatic, periodic announcement of local services to the network. Corresponds directly to SERVER ANNOUNCEMENTS and the presence of the label 'Announcements' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display." ::= { lat 1 } latCircuitTimer OBJECT-TYPE SYNTAX INTEGER (30..200) ACCESS read-write STATUS mandatory DESCRIPTION "Number of milleseconds to collect port input data before sending it to the host. Corresponds directly to SERVER CIRCUIT TIMER and the value labeled 'Circuit Timer:' in the SERVER CHARACTERISTICS display." ::= { lat 2 } latIdentificationLengthLimit OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of characters to store in the instances of latVisibleServiceIdentification. Corresponds directly to SERVER IDENTIFICATION SIZE and the value labeled 'Identification Size:' in the SERVER CHARACTERISTICS display." ::= { lat 3 } latKeepaliveTimer OBJECT-TYPE SYNTAX INTEGER (10..180) ACCESS read-write STATUS mandatory DESCRIPTION "Number of seconds of inactivity before sending a null message to the host. Corresponds directly to SERVER KEEPALIVE TIMER and the value labeled 'Keepalive Timer:' in the SERVER CHARACTERISTICS display." ::= { lat 4 } latMulticastTimer OBJECT-TYPE SYNTAX INTEGER (10..180) ACCESS read-write STATUS mandatory DESCRIPTION "Number of seconds between transmission of local service announcements. Corresponds directly to SERVER MULTICAST TIMER and the value labeled 'Multicast Timer:' in the SERVER CHARACTERISTICS display." ::= { lat 5 } latNodeLimit OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of service nodes to keep in the node table. Corresponds directly to SERVER NODE LIMIT and the value labeled 'Node Limit:' in the SERVER CHARACTERISTICS display." ::= { lat 6 } latNumber OBJECT-TYPE SYNTAX INTEGER (0..32767) ACCESS read-write STATUS mandatory DESCRIPTION "An arbitrary number assigned and used for administrative purposes. Corresponds directly to SERVER NUMBER and the value labeled 'Number:' in the SERVER CHARACTERISTICS display." ::= { lat 7 } latRetransmitLimit OBJECT-TYPE SYNTAX INTEGER (4..120) ACCESS read-write STATUS mandatory DESCRIPTION "Maximum number of times to retransmit an unacknowledged message. Corresponds directly to SERVER RETRANSMIT LIMIT and the value labeled 'Retransmit Limit:' in the SERVER CHARACTERISTICS display." ::= { lat 8 } latLocalServiceGroups OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) ACCESS read-write STATUS mandatory DESCRIPTION "The list of group numbers allowed to use local services, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each group. Corresponding bit numbers start with 0 as the high-order bit of the first octet. Corresponds directly to SERVER SERVICE GROUPS and the value labeled 'Service Groups:' in the SERVER CHARACTERISTICS display." ::= { lat 9 } latGroupPurge OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for automatic deletion of all node table entries when latServiceGroups or latPortCurrentGroups is changed. Corresponds directly to SERVER PURGE GROUP and the presence of the label 'Purge Group' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display." ::= { lat 10 } latNodePurge OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for automatic deletion of all node table entries with status 'reachable' when the number of entries exceeds latNodeLimit. Corresponds directly to SERVER PURGE NODE and the presence of the label 'Purge Node' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display." ::= { lat 11 } latNodesRejected OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of nodes not added to the node table because there was no room. Corresponds directly to the value labeled 'Discarded Nodes:' in the SERVER STATUS display." ::= { lat 12 } latInMessages OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LAT messages received. Corresponds directly to the value labeled 'Messages Received:' in the SERVER COUNTERS display." ::= { lat 13 } latOutMessages OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LAT messages sent. Corresponds directly to the value labeled 'Messages Transmitted:' in the SERVER COUNTERS display." ::= { lat 14 } latInSessionsAccepted OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of incoming LAT session connection attempts accepted. Corresponds directly to the value labeled 'Solicitations Accepted:' in the SERVER COUNTERS display." ::= { lat 15 } latInSessionsRejected OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of incoming LAT session connection attempts rejected. Corresponds directly to the value labeled 'Solicitations Rejected:' in the SERVER COUNTERS display." ::= { lat 16 } latAddressChange OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times a service announcement contained a node name already in the visible service table but with a different address. Corresponds directly to the value labeled 'Multiple Node Addresses:' in the SERVER COUNTERS display." ::= { lat 17 } latInDuplicates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of duplicate LAT messages received. Corresponds directly to the value labeled 'Duplicates Received:' in the SERVER COUNTERS display." ::= { lat 18 } latOutRetransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LAT messages retransmitted due to no acknowledgement. Corresponds directly to the value labeled 'Messages Re-transmitted:' in the SERVER COUNTERS display." ::= { lat 19 } latInBadMessages OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LAT messages received with invalid format. Corresponds directly to the value labeled 'Illegal Messages Rcv'd:' in the SERVER COUNTERS display." ::= { lat 20 } latInBadSlots OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LAT messages received with invalid slot format. Corresponds directly to the value labeled 'Illegal Slots Rcv'd:' in the SERVER COUNTERS display." ::= { lat 21 } latInBadMulticasts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of multicast LAT messages received with invalid format. Corresponds directly to the value labeled 'Illegal Multicasts Rcv'd:' in the SERVER COUNTERS display." ::= { lat 22 } -- the LAT Port table latPortTable OBJECT-TYPE SYNTAX SEQUENCE OF LatPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of LAT character port entries." ::= { lat 23 } latPortEntry OBJECT-TYPE SYNTAX LatPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "LAT parameter values for a port." INDEX { latPortIndex } ::= { latPortTable 1 } LatPortEntry ::= SEQUENCE { latPortIndex INTEGER, latPortAuthorizedGroups OCTET STRING, latPortAutoPrompt INTEGER, latPortCurrentGroups OCTET STRING, latPortRemoteModification INTEGER } latPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Character MIB [11]." ::= { latPortEntry 1 } latPortAuthorizedGroups OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) ACCESS read-write STATUS mandatory DESCRIPTION "The list of group numbers to which the port is allowed to set access, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each group. Corresponding bit numbers start with 0 as the high-order bit of the first octet. Corresponds directly to PORT AUTHORIZED GROUPS and the value labeled 'Authorized Groups:' in the PORT CHARACTERISTICS display." ::= { latPortEntry 2 } latPortAutoPrompt OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for automatic stimulation of a host prompt upon forming a new session. Corresponds directly to PORT AUTOPROMPT and the presence of the label 'Autoprompt' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display." ::= { latPortEntry 3 } latPortCurrentGroups OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) ACCESS read-write STATUS mandatory DESCRIPTION "The list of group numbers to which the port currently has set access, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each group. Corresponding bit numbers start with 0 as the high-order bit of the first octet. Corresponds directly to PORT GROUPS and the value labeled 'Groups:' in the PORT CHARACTERISTICS display." ::= { latPortEntry 4 } latPortRemoteModification OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control to allow the remote system to modify certain physical port characteristics. Corresponds directly to PORT REMOTE MODIFICATION and the presence of the label 'Remote Modification' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display." ::= { latPortEntry 5 } -- The LAT Offered Service table latOfferedServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF LatOfferedServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of offered service entries." ::= { lat 24 } latOfferedServiceEntry OBJECT-TYPE SYNTAX LatOfferedServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Parameter values for an offered service entry." INDEX { latOfferedServiceName } ::= { latOfferedServiceTable 1 } LatOfferedServiceEntry ::= SEQUENCE { latOfferedServiceName DisplayString, latOfferedServiceStatus INTEGER, latOfferedServiceAllowConnections INTEGER, latOfferedServiceIdentification DisplayString, latOfferedServicePassword DisplayString, latOfferedServicePortMap OCTET STRING, latOfferedServiceQueuing INTEGER } latOfferedServiceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of an offered service. Corresponds directly to the name in a SERVICE command and the value labeled 'Service:' in the SERVICE CHARACTERISTICS display." ::= { latOfferedServiceEntry 1 } latOfferedServiceStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR SERVICE command. Actual removal of the entry is implementation specific." DEFVAL { valid } ::= { latOfferedServiceEntry 2 } latOfferedServiceAllowConnections OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for allowing incoming connections to the service. Corresponds directly to SERVICE CONNECTIONS and the presence of the label 'Connections' following the label 'Enabled Characteristics:' in the SERVICE CHARACTERISTICS display." ::= { latOfferedServiceEntry 3 } latOfferedServiceIdentification OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) ACCESS read-write STATUS mandatory DESCRIPTION "Text to identify a service. Corresponds directly to SERVICE IDENTIFICATION and the value labeled 'Identification:' in the SERVICE CHARACTERISTICS display." ::= { latOfferedServiceEntry 4 } latOfferedServicePassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "The password a user must supply to use the service. Corresponds directly to SERVICE PASSWORD and the presence of the label 'Password' following the label 'Enabled Characteristics:' in the SERVICE CHARACTERISTICS display. When setting this value, the management system must supply eight octets, filling with zeros from the first octet. That is, the value '1ab42' would be expressed as '0.0.0.0.0.1.ab.42'. Setting the value to zero disables the password check. When returning this value, the agent always returns a zero length OCTET STRING." ::= { latOfferedServiceEntry 5 } latOfferedServicePortMap OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The list of character ports offer the service. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Character MIB [11]. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to port-list portion of SERVICE PORTS and the value labeled 'Ports:' in the SERVICE CHARACTERISTICS display." ::= { latOfferedServiceEntry 6 } latOfferedServiceQueuing OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control for allowing queuing of incoming connections to the service when the service is busy. Corresponds directly to SERVICE QUEUE and the presence of the label 'Queuing' following the label 'Enabled Characteristics:' in the SERVICE CHARACTERISTICS display." ::= { latOfferedServiceEntry 7 } -- The LAT Visible Service table latVisibleServiceTable OBJECT-TYPE SYNTAX SEQUENCE OF LatVisibleServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of visible service entries." ::= { lat 25 } latVisibleServiceEntry OBJECT-TYPE SYNTAX LatVisibleServiceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Parameter values for a visible service entry." INDEX { latVisibleServiceName } ::= { latVisibleServiceTable 1 } LatVisibleServiceEntry ::= SEQUENCE { latVisibleServiceName DisplayString, latVisibleServiceStatus INTEGER, latVisibleServiceNode DisplayString, latVisibleServiceConnectedSessions Gauge, latVisibleServiceIdentification DisplayString, latVisibleServiceRating Gauge } latVisibleServiceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of a visible service. Corresponds directly to the name in a SERVICE command and the value labeled 'Service Name' in the SERVICE SUMMARY display." ::= { latVisibleServiceEntry 1 } latVisibleServiceStatus OBJECT-TYPE SYNTAX INTEGER { available(1), unavailable(2), unknown(3), unreachable(4), reachable(5), connected(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of communication with the service. Corresponds directly to the value labeled 'Status' in the SERVICE SUMMARY display." ::= { latVisibleServiceEntry 2 } latVisibleServiceNode OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "Name of a node offering the service. Corresponds directly to the value labeled Node Name in the SERVICE STATUS display." ::= { latVisibleServiceEntry 3 } latVisibleServiceConnectedSessions OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of connected sessions to the service. Corresponds directly to the number with the value 'Connected', labeled 'Status' in the SERVICE SUMMARY display." ::= { latVisibleServiceEntry 4 } latVisibleServiceIdentification OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) ACCESS read-only STATUS mandatory DESCRIPTION "Text to identify a service. The length is subject to limitation by latIdentificationLengthLimit. Corresponds directly to the value labeled 'Identification:' in the SERVICE SUMMARY display." ::= { latVisibleServiceEntry 5 } latVisibleServiceRating OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Relative capacity of the service to accept additional sessions. Corresponds directly to value labeled Rating in the SERVICE STATUS display." ::= { latVisibleServiceEntry 6 } -- The LAT Node table latNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF LatNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of node entries." ::= { lat 26 } latNodeEntry OBJECT-TYPE SYNTAX LatNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Parameter values for a node entry." INDEX { latNodeName } ::= { latNodeTable 1 } LatNodeEntry ::= SEQUENCE { latNodeName DisplayString, latNodeStatus INTEGER, latNodeConnectedSessions Gauge, latNodeAddress OCTET STRING, latNodeDataLinkFrame INTEGER, latNodeIdentification DisplayString, latNodeGroups OCTET STRING, latNodeServiceNumber Gauge, latNodeZero INTEGER, latNodeZeroTime TimeTicks, latNodeInMessages Counter, latNodeOutMessages Counter, latNodeInSlots Counter, latNodeOutSlots Counter, latNodeInBytes Counter, latNodeOutBytes Counter, latNodeAddressChange Counter, latNodeInDuplicates Counter, latNodeOutRetransmits Counter, latNodeInBadMessages Counter, latNodeInBadSlots Counter, latNodeInSessionsAccepted Counter, latNodeInSessionsRejected Counter } latNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of a node. Corresponds directly to the value labeled 'Node:' in the NODE STATUS display." ::= { latNodeEntry 1 } latNodeStatus OBJECT-TYPE SYNTAX INTEGER { available(1), unavailable(2), unknown(3), unreachable(4), reachable(5), connected(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of communication with the node. Corresponds directly to the value labeled 'Status' in the NODE STATUS display." ::= { latNodeEntry 2 } latNodeConnectedSessions OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of connected sessions to the node. Corresponds directly to the number with the value 'Connected', labeled 'Status' in the NODE STATUS display." ::= { latNodeEntry 3 } latNodeAddress OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) ACCESS read-only STATUS mandatory DESCRIPTION "Ethernet address of the node. Corresponds directly to the value labeled 'Address:' in the NODE STATUS display." ::= { latNodeEntry 4 } latNodeDataLinkFrame OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Maximum Ethernet frame used by the node. Corresponds directly to the value labeled 'Data Link Frame Size:' in the NODE STATUS display." ::= { latNodeEntry 5 } latNodeIdentification OBJECT-TYPE SYNTAX DisplayString (SIZE (0..63)) ACCESS read-only STATUS mandatory DESCRIPTION "Text that identifies the node. The size is subject to limitation by latIdentificationLengtLimit. Corresponds directly to the value labeled 'Identification' in the NODE STATUS display." ::= { latNodeEntry 6 } latNodeGroups OBJECT-TYPE SYNTAX OCTET STRING (SIZE (32)) ACCESS read-write STATUS mandatory DESCRIPTION "The list of group numbers to which the node belongs, where a group number is in the range 0-255. The OCTET STRING contains a bitmap, with one bit for each group. Corresponding bit numbers start with 0 as the high-order bit of the first octet. Corresponds directly to the value labeled 'Node Groups:' in the NODE STATUS display." ::= { latNodeEntry 7 } latNodeServiceNumber OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "Number of entries for the node in the node service table. Corresponds indirectly to the list of services in the NODE STATUS display." ::= { latNodeEntry 8 } latNodeZero OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control to zero counters kept for the node. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes all the system's counters to be zeroed. Corresponds to the ZERO NODE command." ::= { latNodeEntry 9 } latNodeZeroTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The number of hundredths of a second since the most recent zeroing of the counters kept for the node, such as through execution of sysZeroAll or latNodeZero. Corresponds directly to the value labeled 'Seconds Since Zeroed:' in the NODE COUNTERS display." ::= { latNodeEntry 10 } latNodeInMessages OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAT messages received from the node. Corresponds directly to the value labeled 'Messages Received:' in the NODE COUNTERS display." ::= { latNodeEntry 11 } latNodeOutMessages OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAT messages sent to the node. Corresponds directly to the value labeled 'Messages Transmitted:' in the NODE COUNTERS display." ::= { latNodeEntry 12 } latNodeInSlots OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAT slots received from the node. Corresponds directly to the value labeled 'Slots Received:' in the NODE COUNTERS display." ::= { latNodeEntry 13 } latNodeOutSlots OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAT slots sent to the node. Corresponds directly to the value labeled 'Slots Transmitted:' in the NODE COUNTERS display." ::= { latNodeEntry 14 } latNodeInBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of bytes received from the node, including Ethernet overhead. Corresponds directly to the value labeled 'Bytes Received:' in the NODE COUNTERS display." ::= { latNodeEntry 15 } latNodeOutBytes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The total number of bytes sent to the node, including Ethernet overhead. Corresponds directly to the value labeled 'Bytes Transmitted:' in the NODE COUNTERS display." ::= { latNodeEntry 16 } latNodeAddressChange OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a LAT message multicast by the node had a different Ethernet address from the previous time. Corresponds directly to the value labeled 'Multiple Node Addresses:' in the NODE COUNTERS display." ::= { latNodeEntry 17 } latNodeInDuplicates OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of duplicate LAT message received from the node. Corresponds directly to the value labeled 'Duplicates Received:' in the NODE COUNTERS display." ::= { latNodeEntry 18 } latNodeOutRetransmits OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAT message retransmitted to the node due to lack of acknowledgement. Corresponds directly to the value labeled 'Messages Re-transmitted:' in the NODE COUNTERS display." ::= { latNodeEntry 19 } latNodeInBadMessages OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAT message received from the node with invalid format. Corresponds directly to the value labeled 'Illegal Messages Received:' in the NODE COUNTERS display." ::= { latNodeEntry 20 } latNodeInBadSlots OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAT slots received from the node with invalid format. Corresponds directly to the value labeled 'Illegal Slots Received:' in the NODE COUNTERS display." ::= { latNodeEntry 21 } latNodeInSessionsAccepted OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAT session connection attempts received from the node and accepted. Corresponds directly to the value labeled 'Solicitations Accepted:' in the NODE COUNTERS display." ::= { latNodeEntry 22 } latNodeInSessionsRejected OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of LAT session connection attempts received from the node and rejected. Corresponds directly to the value labeled 'Solicitations Rejected:' in the NODE COUNTERS display." ::= { latNodeEntry 23 } END