### International Fonts Ver.1.1 ###

0. Introduction

This directory contains free X11 fonts (BDF format) for all characters
that Emacs 20 can handle.  They are classified into several
categories, with one archive file (*.tar) for each category.

This directory also contains the following two files:
  README -- this file
  Makefile -- to install fonts

1. Instructions for installing these fonts

1.1  Suppose that you put copies of font archives in $DISTDIR.
This directory should contain Makefile as well as this README file and
archive files.

Suppose that you want to install fonts in the directory $INSTDIR.
This directory should be readable by your X server.

1.1  cd to $DISTDIR

1.2  Run the command `make' with one arguement `all'.  
Then all fonts in the archive files you put in $DISTDIR are installed
in the directory:
	/usr/local/share/emacs/fonts
If this direcotry is different from $INSTDIR, run `make' as follows:
	% make INSTALLDIR=$INSTDIR all

If you want to install only some portions of the fonts in $DISTDIR,
read the explanation displayed by:
	% make

1.3  The step 1.2 only converts fonts to a format X server can read
(PCF format) and put them in proper directory.  You must inform your X
server about the new fonts.
You can tell one X session to use the installed fonts with:
	% xset +fp $INSTDIR
On some systems, you may have to give absolute pathname to the command
`xset'.

To make the effect permanent for future X sessions, you probably have
to edit certain files in yout X installation, for instance, include
the following line in your ~/.xinitrc or ~/.xsession.
	xset +fp $INSTDIR

2. List of font archives

2.1  Classification of archive files

Fonts are classified by the following regions:
	European, Asian, Chinese, Japanese, Korean, Ethiopic, Misc
and this directory contains the following kinds of archives.

o REGION.tar

The fonts in these archives are the fonts of normal size (less than or
equal to 24dots) not included in the standard distribution of X window
system.  You surely need all of them to correctly display all
characters supported by Emacs 20.

o REGION-X.tar

The fonts in these archives are fonts of normal size included in the
standard distribution of X window system.  You may not need them if
you have already installed X's fonts (distributed under `misc'
subdirectory).

o REGION-BIG.tar

The fonts in these archives are fonts of big size (greater than
24dots).  None of them are included in the standard distribution of X
window system.  You need them only when you surely want to see big
characters.  But, they do not cover all character sets.

This directory also contains the archives of fonts classified by their
sizes (see the tail of this file).  They contain both fonts included
in X's distribution and fonts not included in it.

2.2  Contents of each archive file

European.tar -- European normal size fonts (suitable with the other fonts)
	etl{14,16,24}-latin1.bdf	-- ISO8859-1 (Latin-1)
	etl{14,16,24}-latin2.bdf	-- ISO8859-2 (Latin-2)
	etl{14,16,24}-latin3.bdf	-- ISO8859-3 (Latin-3)
	etl{14,16,24}-latin4.bdf	-- ISO8859-4 (Latin-4)
	etl16b-latin1.bdf		-- ISO8859-1 (Latin-1) bold
	etl16i-latin1.bdf		-- ISO8859-1 (Latin-1) italic
	etl16bi-latin1.bdf		-- ISO8859-1 (Latin-1) bold-italic
	etl{14,16,24}-cyrillic.bdf	-- ISO8859-5 (Cyrillic)
	etl{14,16,24}-greek.bdf		-- ISO8859-7 (Greek)
	etl{14,16,24}-hebrew.bdf	-- ISO8859-8 (Hebrew)
	etl{14,16,24}-latin5.bdf	-- ISO8859-9 (Latin-5)
	etl{14,24}-koi.bdf		-- KOI (Cyrillic)
	a18.bdf				-- 9x18 dots ISO8859-1 (Latin1)

European-BIG.tar -- European big fonts
	etl40-latin1.bdf		-- ISO8859-1 (Latin-1)

Asian.tar -- Asian (non-CJK) fonts
	etl{16,24}-viscii.bdf		-- Vietnamese (VISCII)
	mule-indian-1col-24.bdf 	-- Indian script
	mule-indian-24.bdf		-- Indian script
	mule-iscii-24.bdf		-- Indian script
	mule-lao-{14,16,24}.bdf		-- Lao
	mule-tibmdx-{16,24}.bdf		-- Tibetan double column width
	mule-tibmdx-1col-{16,24}.bdf	-- Tibetan single column width
	thai-{14,16,24}.bdf		-- Thai (TIS620)

Chinese.tar  -- Chinese normal size fonts excluding what distributed with X
	guobiao16.bdf			-- 16 dots GB2312 + GB8565-88
	cns-[1234567]-24.bdf		-- 24 dots CNS Plane 1..7
	taipei{16,24}.bdf		-- 16 and 24 dots BIG5 (ETen)
	etl{14,16,24}-sisheng.bdf	-- 14, 16, 24 dots SiSheng

Chinese-BIG.tar -- Chinese big fonts
	cc{40,48}s.bdf			-- 40 and 48 dots GB2312
	cns-[1234567]-40.bdf		-- 40 dots CNS Plane 1..7

Chinese-X.tar -- Chinese fonts distributed with X
	gb16{fs,st}.bdf			-- 16 dots GB2312
	gb24st.bdf			-- 24 dots GB2312

Japanese.tar -- Japanese normal size fonts excluding what distributed with X
	k16-1990.bdf			-- 16 dots JISX0208.1990
	jiskan16-1978.bdf		-- 16 dots JISX0208.1978
	jisksp16.bdf			-- 16 dots JISX0212.1990 (HojoKanji)
	kanji18.bdf			-- 18 dots JISX0208.1983
	a18rk.bdf			-- 9x18 dots JISX0201 (Roman & Kana)

Japanese-BIG.tar -- Japanese big fonts
	kanji32.bdf			-- 32 dots JISX0208.1983
	kanji48.bdf			-- 48 dots JISX0208.1983
	jisksp40.bdf			-- 40 dots JISX0212.1990 (HojoKanji)

Japanese-X.tar -- Japanese fonts distributed with X
	k14.bdf				-- 14 dots JISX0208.1983
	jiskan{16,24}.bdf		-- 16 and 24 dots JISX0208.1983
	8x16rk.bdf			-- 8x16 dots JISX0201 (Roman & Kana)
	12x24rk.bdf			-- 12x24 dots JISX0201 (Roman & Kana)

Korean-X.tar -- Korean fonts distributed with X
	hangl[mg]16.bdf			-- 16 dots KSC5601.1987
	hanglm24.bdf			-- 24 dots KSC5601.1987

Ethiopic.tar -- Ethiopic fonts
	ethiomx16f-uni.bdf		-- 16 dots Ethiopic (Unicode)
	ethiomx24f-uni.bdf		-- 24 dots Ethiopic (Unicode)

Misc.tar -- fonts for the other regions
	etl{14,16,24}-ipa.bdf		-- International Phonetic Alphabet
	etl{14,16,24}-hebrew.bdf 	-- Hebrew (ISO8859-8)
	etl{16,24}-arabic0.bdf		-- Arabic digits
	etl{16,24}-arabic1.bdf		-- Arabic single column
	etl{16,24}-arabic2.bdf		-- Arabic double columnfont