Table of Contents
BIND 9.13 is an unstable development release of BIND. This document summarizes new features and functional changes that have been introduced on this branch. With each development release leading up to the stable BIND 9.14 release, this document will be updated with additional features added and bugs fixed.
Prior to BIND 9.13, new feature development releases were tagged as "alpha" and "beta", leading up to the first stable release for a given development branch, which always ended in ".0".
Now, however, BIND has adopted the "odd-unstable/even-stable" release numbering convention. There will be no "alpha" or "beta" releases in the 9.13 branch, only increasing version numbers. So, for example, what would previously have been called 9.13.0a1, 9.13.0a2, 9.13.0b1, and so on, will instead be called 9.13.0, 9.13.1, 9.13.2, etc.
The first stable release from this development branch will be renamed as 9.14.0. Thereafter, maintenance releases will continue on the 9.14 branch, while unstable feature development proceeds in 9.15.
The latest versions of BIND 9 software can always be found at http://www.isc.org/downloads/. There you will find additional information about each release, source code, and pre-compiled versions for Microsoft Windows operating systems.
When recursion is enabled but the allow-recursion and allow-query-cache ACLs are not specified, they should be limited to local networks, but they were inadvertently set to match the default allow-query, thus allowing remote queries. This flaw is disclosed in CVE-2018-5738. [GL #309]
A new secondary zone option, mirror, enables named to serve a transferred copy of a zone's contents without acting as an authority for the zone. A zone must be fully validated against an active trust anchor before it can be used as a mirror zone. DNS responses from mirror zones do not set the AA bit ("authoritative answer"), but do set the AD bit ("authenticated data"). This feature is meant to facilitate deployment of a local copy of the root zone, as described in RFC 7706. [GL #33]
BIND now can be compiled against the libidn2 library to add IDNA2008 support. Previously, BIND supported IDNA2003 using the (now obsolete and unsupported) idnkit-1 library.
named now supports the "root key sentinel"
mechanism. This enables validating resolvers to indicate
which trust anchors are configured for the root, so that
information about root key rollover status can be gathered.
To disable this feature, add
root-key-sentinel no; to
named.conf. [GL #37]
The dnskey-sig-validity option allows the sig-validity-interval to be overriden for signatures covering DNSKEY RRsets. [GL #145]
Support for QNAME minimization was added and enabled by default in relaxed mode, in which BIND will fall back to normal resolution if the remote server returns something unexpected during the query minimization process. This default setting might change to strict in the future.
When built on Linux, BIND now requires the libcap library to set process privileges. The adds a new compile-time dependency, which can be met on most Linux platforms by installing the libcap-dev or libcap-devel package. BIND can also be built without capability support by using configure --disable-linux-caps, at the cost of some loss of security.
named can no longer use the EDNS CLIENT-SUBNET option for view selection. In its existing form, the authoritative ECS feature was not fully RFC-compliant, and could not realistically have been deployed in production for an authoritative server; its only practical use was for testing and experimentation. In the interest of code simplification, this feature has now been removed.
The ECS option is still supported in dig and
mdig via the +subnet argument, and can be parsed
and logged when received by named, but
it is no longer used for ACL processing. The
geoip-use-ecs option is now obsolete;
a warning will be logged if it is used in
ecs tags in an ACL definition are
also obsolete, and will cause the configuration to fail to
load if they are used. [GL #32]
dnssec-keygen can no longer generate HMAC keys for TSIG authentication. Use tsig-keygen to generate these keys. [RT #46404]
Support for OpenSSL 0.9.x has been removed. OpenSSL version 1.0.0 or greater, or LibreSSL is now required.
The configure --enable-seccomp option, which formerly turned on system-call filtering on Linux, has been removed. [GL #93]
IPv4 addresses in forms other than dotted-quad are no longer accepted in master files. [GL #13] [GL #56]
IDNA2003 support via (bundled) idnkit-1.0 has been removed.
The "rbtdb64" database implementation (a parallel implementation of "rbt") has been removed. [GL #217]
The -r randomdev option to explicitly select random device has been removed from the ddns-confgen, rndc-confgen, nsupdate, dnssec-confgen, and dnssec-signzone commands.
The -p option to use pseudo-random data has been removed from the dnssec-signzone command.
Support for ECC-GOST (GOST R 34.11-94) algorithm has been removed from BIND as the algorithm has been superseded by GOST R 34.11-2012 in RFC6986 and it must not be used in new deployments. BIND will neither create new DNSSEC keys, signatures and digest, nor it will validate them.
Add the ability to not return a DNS COOKIE option when one is present in the request. To prevent a cookie being returned add 'answer-cookie no;' to named.conf. [GL #173]
answer-cookie is only intended as a temporary measure, for use when named shares an IP address with other servers that do not yet support DNS COOKIE. A mismatch between servers on the same address is not expected to cause operational problems, but the option to disable COOKIE responses so that all servers have the same behavior is provided out of an abundance of caution. DNS COOKIE is an important security mechanism, and should not be disabled unless absolutely necessary.
BIND will now always use the best CSPRNG (cryptographically-secure pseudo-random number generator) available on the platform where it is compiled. It will use arc4random() family of functions on BSD operating systems, getrandom() on Linux and Solaris, CryptGenRandom on Windows, and the selected cryptography provider library (OpenSSL or PKCS#11) as the last resort. [GL #221]
The default setting for dnssec-validation is
auto, which activates DNSSEC
validation using the IANA root key. (The default can be changed
yes, which activates DNSSEC
validation only when keys are explicitly configured in
named.conf, by building BIND with
configure --disable-auto-validation.) [GL #30]
BIND can no longer be built without DNSSEC support. A cryptography provder (i.e., OpenSSL or a hardware service module with PKCS#11 support) must be available. [GL #244]
Zone types primary and
secondary are now available as synonyms for
master and slave,
named will now log a warning if the old root DNSSEC key is explicitly configured and has not been updated. [RT #43670]
dig +nssearch will now list name servers that have timed out, in addition to those that respond. [GL #64]
dig +noidnin can be used to disable IDN processing on the input domain name, when BIND is compiled with IDN support.
Up to 64 response-policy zones are now supported by default; previously the limit was 32. [GL #123]
Several configuration options for time periods can now use
TTL value suffixes (for example,
1d) in addition to an integer number of
seconds. These include
NSID logging (enabled by the request-nsid option) now has its own nsid category, instead of using the resolver category.
named now rejects excessively large incremental (IXFR) zone transfers in order to prevent possible corruption of journal files which could cause named to abort when loading zones. [GL #339]
BIND is open source software licenced under the terms of the Mozilla
Public License, version 2.0 (see the
file for the full text).
The license requires that if you make changes to BIND and distribute them outside your organization, those changes must be published under the same license. It does not require that you publish or disclose anything other than the changes you have made to our software. This requirement does not affect anyone who is using BIND, with or without modifications, without redistributing it, nor anyone redistributing BIND without changes.
Those wishing to discuss license compliance may contact ISC at https://www.isc.org/mission/contact/.
BIND 9.13 is an unstable development branch. When its development is complete, it will be renamed to BIND 9.14, which will be a stable branch.
The end of life date for BIND 9.14 has not yet been determined. For those needing long term support, the current Extended Support Version (ESV) is BIND 9.11, which will be supported until at least December 2021. See https://www.isc.org/downloads/software-support-policy/ for details of ISC's software support policy.
Thank you to everyone who assisted us in making this release possible. If you would like to contribute to ISC to assist us in continuing to make quality open source software, please visit our donations page at http://www.isc.org/donate/.
BIND 9.13.2 (Development Release)